Running X4 under Win7 and it always goes back to the last file I was working on when I go to the Open dialogue. It insists on going to the Libraries Directory on my C: drive and 99% of my files are stored on my H: drive. Sometimes it's easy to get out of, other times I can't back up at all. Is there someway to gte the Open dialogue to simply go to My Computer instead?
View 3 RepliesThe dialogue box for Uniform Fill is not opening.
So I am posting a video here: [URL]
1. I prepared a 57 mm square, proportionally resized it to 58 mm and applied enter for the change but it remained as is i.e. 57 mm sq. Next I made the same changes through property bar, it worked. Through further experiments I observed it only make transformations through enter if we give x=val and move to y=val through tab and press enter. Or if we directly give new value to y and press enter. The property bar doesn't has this problem.
2. Transformations dockers problem of showing wrong position on y-axis. Screen shot attached.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key. This problem remains as is from v16.0.0.707.
4. Printing - EPS with CMYK / Native colour management shows graying problem on RIP. Facing it as a major problem.
Problems encountered even after resetting through pressing F8 at startup.
Windows 7 64 bit user.
Upgraded to 2.8 with total deletion of the Gimp folder to try to address this.
File / Open Recent works fine.
File / New etc same all good...
File / Open has a problem.
Once that window opens the product is hung.
There is no window to type the file name in, and I cannot click on any of the disk drive names.
I must admit that I have a good number of network and usb as well as physical drives. I do not think that any have changed names, but it seems clear that something like a path change is responsible?
How to repair a stuck File/Open dialogue.
When I change the column headings e.g. date, tag size etc., on the OPEN FILE box, they revert to the unchanged headings after toe box is closed.
Is there a method of keeping them as I want them ?
I have PS CS5 64 bit running on a PC, Win 7.
Everything has been working fine but I have recently installed two new extension panels - Fundy Image Brander and Tych Panel. When either of these scripts require you to input a file to open via the Open File dialogue box, everything hangs for 2-3 minutes. The mouse and keyboard do not lock and you can open up other windows which work fine. The open file dialogue just hangs (not just on selecting an individual image but selecting a drive or folder). If you call up the Task Manager and End Photoshop as a task a dialogue box pops up with the message "The system cannot end this program because it is waiting for a response from you."
Photoshop otherwise works well. It's just when the extension panel requires you to input a file to open.
Inventor Pro 2012.I am opening some SolidWorks 2011 SLDPRT files to make them into Inventor part files.The models come in fine. When I try to produce a IDW I can Dimension all the geometry but can not call out and holes/threads. I am using Win 7 64 bit, all the latest service packs for Inventor and Windows.
I have include a snipe screen of the Open file dialogue box and the selected options.
In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies View RelatedI recently started having a problem with the 'Merge to HDR Pro' process in photoshop CS5.
Recently, however, I have been unable to generate 32 bit images from the 'Merge to HDR Pro' process.
When I begin the process and select my files, the dialogue box I should see pop open to select 32 bit, 16 bit, etc. output options, does not open. Photoshop launches directly into the merge process, aligns the source photos, transforms, etc., and finally outputs a 16 bit image, which is opened in photoshop as if I had opened it from a source folder.
At no point in the process is the histogram of the new HDR photo displayed. I am unable to find any HDR preference pages where I could possibly change settings.
Suddenly today my open dialogue box has reverted to an old-fashioned looking small thing about 7" x 4 1/2" which only shows 7 files at a time. Always before I got a nice big Windows Explorer style box nearly filing the screen. I'm running Windows 7 and Inventor 2011. Is there a switch somewhere to revert to the 'old' type box and that's got switched somehow?
View 4 Replies View Relatedis it possible to Zoom and Pan whilst I have a title box open.I work for a company that has installed its own toolbar and and attribute box's to be filled out. My issue is that I need to zoom into various parts of the drawing to be able to fill out all the boxes.
Currently I have to close the dialogue box down every time I want to move the drawing to a specific area.If there was a command or setting that I could use to be able to keep the box open and move the drawing at the same time.
if i try and to open a new file or save as a current file, the windows box does not open. the command line does populate asking for file name, etc, but obviously is very tedious to navigate windows folders with a command line!
any obvious changes that would prevent windows folder dialogue box not to open?
is it possible to Zoom and Pan whilst I have a title box open.
I work for a company that has installed its own toolbar and and attribute box's to be filled out.
My issue is that I need to zoom into various parts of the drawing to be able to fill out all the boxes.
Currently I have to close the dialogue box down every time I want to move the drawing to a specific are.
If there was a command or setting that I could use to be able to keep the box open and move the drawing at the same time that would be great.
When ever I open a drawing from the file menu or open file icon, the preview pane is missing from the dialogue box. I is there if i use file new or when I insert a block of file. Please see attached screen print.
Acad LT2013
This is the second time in a week this has happened. Was able to repair it the first time by changing the name MediaDatabase.db3 to MediaDatabase.old
View 1 Replies View RelatedI have two PC's side-by-side, running the same version of CS6. On one PC, I can see my Libraries from the "save as" and "open" dialogue boxes and on the other I have can't have have to dig down to find the folders I want to save to. I don't have any plug-ins installed, and I have not edited the registry.
View 2 Replies View RelatedI was working on my wedding album and had half of it done. The file size is 2.08 GB -- huge I know, and every time I saved the file or the autosave feature came on it took several minutes. I closed the file and tried to re-open it but all I got was a blank standard sized page. The same thing happened with the back-up.
I desperately need to submit the album pages in the next 12 hours or I lose the money I prepaid with the printer. I tried renaming the file as a .zip and then went into one of the folders and opened the riffData.cdr file, but no luck there. I also tried opening a new CDR file and importing the old one, but that didn't work.
When I try to open a 17 MB CDR file, A.R.M. comes up and Corel crashes. I can open other CDR files fine.
WHen the ARM wizard finishes, I get this message:
---------------------------CorelDRAW X3: CorelDRW.exe - Application Error---------------------------The instruction at "0x0065007d" referenced memory at "0x0027f8aa". The memory could not be "written".
Click on OK to terminate the program---------------------------OK ---------------------------
is a very important file (I can't open the Backup file either).
I made a file in coreldraw x6 and unintentionally opened in corel X5. Obviously it didnt open. But apart from that, the file neither opens in corel x6 now!
It seems it cant be opened or something like that. But anyway it still sizes 2,94MB, so I am hopeful to recover it.
[URL]
When I open a CGM file with X5, I see my graphique and my text correctly. But after a save/close/re-open, I have problem with some letter like X, H, I, L or T. Extremities of those letters are joining and letters look like "greek" letters (After check, it's not a greek format). How to fix it without re-write all text?
View 9 Replies View RelatedHow to open .dmp file in corel darw.
View 2 Replies View RelatedI want to open a ".ecw " file in coreldraw x4. What is the process?
View 4 Replies View Relateda similar problem, I am running CorelDraw x6 64 bit on a win 7 64 bit 8 gb ram 8 core processor machine. One machine that I use have x6 64 bit on win7 64 bit and the other one x5 32 bit on a win7 32 bit.I saved the work in x5 x4 and x3 versions on this machine; but the files I 'saved as' never open in any other machine except on x6 64 bit/32 bit machines. I tried opening them in x5 32 bit on win 7 32 bit but the files are not opening. the x6 64 bit files saved in above versions perfectly open in x6 32 bit; but not a single file that I saved in on x6 64 bit open in x5 32 bit.
View 7 Replies View RelatedI can't open my cdr file. It was created in CorelDraw x5. I think it's because file is too much - 16 Mb.
It would be good if someone can open that file and save a part of objects in lower CorelDraw version.
I've tried many ways to open it, but I can't...
I can upload it to somewhere on the net and send link to download.
I´m trying to open a file that comes with a cd. Windows explorer tells me the file was produced with coreldraw 5. but when i try to open it coreldraw x6 crashes immediately (x64).
latest patch installed.
link to the file: [URL]
i´d be very lucky if you tell me with which version of coreldraw you were able to open this file and/or how to avoid crashing of coreldraw x6 on my computer.
I working in a file which contains 12 photograph cut with 12 letters a simple file.. and cannot open. I clik in open (open draw window) and it is´nt working.
View 2 Replies View RelatedOften I have "stuff" outside of the actual "page" size, and I'm wondering if there's a setting in X6 which will show all content (as opposed to the page size) upon opening the file.
View 2 Replies View RelatedQ When I import an EPS file into CorelDRAW, and print to a non-PostScript printer, the output appears pixelated and unclear. Why?
A An EPS file is a Postscript (PS) file and meant to be printed to a PostScript printer. When printed to a non-PostScript printer, it will only print the file header which is a low resolution preview of the actual file. If you wish to print the actual contents of the EPS file to a non-PostScript printer, import the file it into CorelDRAW using the PostScript Interpreted (PS, PRN, EPS) filter.So, apparently it can be done, but when I try to import this file into my Coreldraw, there is no option to import with that type of filter that I can see. Is this something that is missing in v12? If v12 wont do it, is there any other way to import this file without it coming in all pixellated? Or is there another way to convert the file into a format such as .plt?
I am not being able to open a .cdr file in Draw. Its about 1.16 gb, I know its big but I didnt realise it has become so big, it has 18 pages now. It was working fine till yesterday. but now when i am trying to open it a pop up comes showing error reading file. I am using x4 in a 32 bit windows 7 with 4 gb ram.I have tried opening in laptop with 64bit windows 7 4 gb ram, it opened till 80% adn then a different error came which said - invalid object. I need to retrieve the artwork, i have worked on it for more than 3 weeks. The back up file also shows the same.
View 7 Replies View RelatedI'm trying to open an eps file in Coreldraw X5 and it's blank. Someone could try with illustrator? URl....
View 7 Replies View RelatedI recently opened a .pdf document into CorelDraw x5 using the pdf extension in available file types to find the file.
Now when i try to use the normal open command to open a file the cdr is not available in the available file types region, everything else is still there except CDR.
To open a coreldraw file now has to be done in file manager.