CorelDRAW X4 :: Error Reading File / Can't Open CDR
Apr 19, 2012
I am not being able to open a .cdr file in Draw. Its about 1.16 gb, I know its big but I didnt realise it has become so big, it has 18 pages now. It was working fine till yesterday. but now when i am trying to open it a pop up comes showing error reading file. I am using x4 in a 32 bit windows 7 with 4 gb ram.I have tried opening in laptop with 64bit windows 7 4 gb ram, it opened till 80% adn then a different error came which said - invalid object. I need to retrieve the artwork, i have worked on it for more than 3 weeks. The back up file also shows the same.
View 7 Replies
ADVERTISEMENT
Jan 9, 2009
I'm using Coreldraw X3,operating system, Windows XP Professional version 2002, 1GB of RAM,free space of 4.56GB on C drive, 34.8GB on backup drive,display adapter Radeon X300,HP compaq dc7600 convertibleI'm having a lot of difficulties opening a series of files. I had been working on a laptop for a few months and upon returning to the office I tansfered the files to my desktop to complete thr final revisions. I worked on my desktop for 3wks without no problems and then one day I went to open the files and recieved this message on all of them:"Error reading a bitmap in file"I have since tried numerous methods with no success.
View 13 Replies
View Related
Jul 18, 2012
Some users are getting the following error when running Script Pro:
Error while reading log file for <drawing path>
View 4 Replies
View Related
Jul 26, 2013
I had my Mac crash on me a few days ago and since then I've been only able to work on my current project for ten minutes at a time before I get the above dialogue come up.
It's not just this file that suffers from this and there doesn't appear to be a pattern to which file is affected. The files that are mentioned in the dialogue are outputs from both FCP and from AE itself, they are always Quicktimes and they are compressed with the Animation codec, although I've used a number of other codecs and it doesn't seem to make any difference. If I quit and restart AE, I can continue working for a while on a composition with the same file that caused the dialogue to appear, until it happens again, often with a different file mentioned in the dialogue.
We have re-installed the CC suite after an uninstall and clean-up, but to no avail.
Do we need to reinstall the OS? Could it be a quicktime thing?
View 6 Replies
View Related
Jun 20, 2011
i was working on an animation and that was a great animation I worked on that 2 months and i was working on that and when i wanted to save the scene the monitor gone black and i restart my pc.and when i opened the maya and tried to open the scene it said error reading file.
View 2 Replies
View Related
May 16, 2012
Working in LR 3.6, Mac OS10.6.8, 8GB RAM, accessing from an external USB 2TB harddrive, and when opening an image I get the error:
"Lightroom encountered an error when reading a catalogue file and needs to quit.
"Lightroom will attempt to diagnose the problem the next time it launches."
I've run "Optimize Catalogue" and that didn't relieve the problem. Also have deleted preference files and still no joy. I also have upgrade to LR4 in hopes that it will fix the problem and it didn't. So I've removed LR4 for the time being until I can figure this out in LR3.
Here is a screen shot:
View 1 Replies
View Related
Dec 11, 2011
When I try and render my 23 minute project to WMV HD 720p it gets to 6% and says file reading error.
View 11 Replies
View Related
Jun 1, 2011
i backup my files and now when i want open them see this message
error reading a bitmap in file......
this is my sample file
[URL].....
my old corel was X3 and now cant open with X5 sp 3 or X3.
my system is:
windows 7 x64
4GB ram
cpu intel core i5 760
View 4 Replies
View Related
May 1, 2012
When designing brochures in X5, we quite often will save a file with no issues, but when we go to re-open it we end up with "encountered an improper arument" error message and the file is no longer able to be opened.
If you try to open the backup it comes up with a "runtime error" and won't open either. We are running Windows 7
View 3 Replies
View Related
Mar 26, 2013
have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.
View 2 Replies
View Related
Feb 25, 2008
I am getting a Could not open due to unexpected end of file error messages on a bunch of jpg's I am receiving via email. The files open in Microsoft Office Picture Manager.
View 2 Replies
View Related
Oct 25, 2012
I'm getting the following error:
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
View 4 Replies
View Related
Apr 1, 2009
I have been re-saving many of my PSD files using CS3 image prosesssor with compatibility mode turned off. They have simply been saved again as PSD files into a different folder - no changes to the original PSD files. This has worked well and reduced file sizes by up to 50% (I had compatibility mode turned on previously).
of the 60 files I have processed, 3 will no longer open , I get a message that says "file will not open due to a program error."
these files have only ever been used in CS3. , they are quite large
from just under 1GB to 1.5GB, however other similar large files have processed successfully. I have re-tried without success.
I still have the original files so no data loss is involved.
View 5 Replies
View Related
Feb 6, 2013
In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies
View Related
Feb 20, 2013
Get this error when I try to open more than one file. Happens on different files, but especially on jobs that have side panels on packaging. The files have placed .psd images. Happens on different computers (10.6 & 10.8.2).
Can get the file open usually by closing the othere open file, but then is hard to copy and paste between files. Sometimes I get this when trying to open one file, but restarting Illustrator usually fixes this.
Have tried working directly from the hard drive, and still get this problem. Does to follow an exact pattern, can try to open file a, then b one day thsi will work another will fail. Seems like something is corrupting the memory, and usually happens with more complex files. Happens in CS5 & CS6, though I mostly work in CS5.
View 1 Replies
View Related
Feb 16, 2012
I have a scene which on one machine will cause error (and crash max) when trying to open it (last time I did that -2 days ago - it was OK) but on a different PC with less mwmory - it will open nicely.
Also - I tried opening backup file from the same folder - error and crash.Files from other projects open nicely as well.
I even thought about memory issues (PC is 4 months old and does not cause any problem)I tried merging it - crash..I tried merging some objects - in some cases it was OK but mostly - crash.
Again - When I opened it on a different PC - it causes no issues.
View 3 Replies
View Related
Apr 14, 2011
After a system crash, I was unable to open any of the autoback files. I get a "File Open Failed" error.
View 5 Replies
View Related
Nov 18, 2013
When I try to open a AI, ID, PS file from windows explorer the file will not open and all I keep getting is an error message 5 telling me i need to uninstall and reinstall the software, but i have tried that with AI and it didn't work. But when I launch AI or another program and open the file it opens.
View 1 Replies
View Related
Jan 10, 2013
I get this error message when trying to open a PDF in CorelDraw X6: There was an error while decoding a stream. What might cause this?
View 3 Replies
View Related
May 5, 2012
Running PSD 12.0.4 (Extended) on a Mac Pro, Mac OS 10.7.3. Plenty of ram; plenty of hard disk space.
I just finished installing a new 1TB drive in one of my bays; I now have (3) 1TB drives total. Initialized the new drive (Mac OS Extended/Journaled), partitioned for Lion, then installed the OS and migrated everything from my primary (boot) drive using Migration Assistant.
After finishing, PSD gives the following error on start: "Could not open a scratch file because the disk is not available". I can command+option on start, select the boot drive as scratch and set the rest to None; that configuration works (and sticks). However, if I try to set scratch volumes to either of my backup volumes, I get the same error. Additionally, Illustrator can't even see the other two volumes in the scratch disk selector (PSD sees them, but won't accept them).
Here's what I've done:
- using simple disk drive names (i.e. WD1, WD2, WD3)
- verified all drives with Disk Utility
- ran drive diagnostics on all drives using SMART Utility (no problems found)
- reset paramter ram (comand+option+p+r on Mac startup)
- repaired permissions (all volumes - no permission errors found)
- reset PSD prefs (command+option+shift on start)
- deactivated/uninstalled/reinstalled PSD
View 8 Replies
View Related
Nov 11, 2013
I have been using CS6 for quite sometime with no much issues at all. All the sudden, today, without any changes being made in my computer (iMAC IOS 10.9) the software stopped opening files when I went FILE/OPEN and selecting the file to open (jpg). CS6 opens "finder" and then quickly the finder window disappears (so no time to make any selection,,this is not related to a type of file since...I can never get to even select one..) and the message "Could not complete your request because of a program error". The only option is to click OK and that is it.
I now need to go and open finder and then navigate through to the file and the right click and choose Open with CS6 (anf the file opens)..
View 5 Replies
View Related
Jun 17, 2012
CS5 has suddenly fallen over with the following error message when trying to open a raw file (.CR2 / 5DII), which it could open previously:
"Could not complete request because of a problem with the file-format module interface".
View 11 Replies
View Related
Dec 12, 2012
Working on a client job, I created a photoshop cs6 document. Now I can't open the document anymore. Program error message.I always make different versions when working on a job. When I have to make an important change I save a new version of my work. All the previous versions won't open either.
I still have my Photoshop cs5 installed on my computer. Tried that and it worked. All the files open in cs5 but won't open in cs6.I remember taking some work home where I have cs4 running on the laptop.
View 9 Replies
View Related
Sep 10, 2007
I recently upgraded to ps cs3.
Problem: Whenever I work on a file and try to save it as a psd file i get the following: "Cannot save as "C:lah.psd because the file is already in use or was left open."
Now this happens even if no file is open or I try to save the file with a different name. If i hit Ctrl+S to a psd file, it saves. If I try to save as a jpg file, it saves. But when I try to save as a psd file, then I get the above error message.
I have tried uninstalling and reinstalling. I even went back to cs2 but this problem continued to happen in cs2 as well.
View 1 Replies
View Related
Jul 10, 2008
I am getting this error on all of my Vista 64 systems running Autocad Map 2008 ("fixed" to run on 64 bit):
Error: Cannot Open Frame File .AcMapCoordinateTransform.cpp
I have found some info here showing the same problem on a 32 bit machine:
[URL]
The problem is I don't know how to set my machine to NOT use the 3G switch, as this is Vista x64 not XP x32.
I have tried this with multiple machines and fresh builds.
View 2 Replies
View Related
Feb 11, 2013
When I double click an AI file to open it, I get this message: "Can't open the illustration. There is not enough room for the window, increase document area and try again". This error started happening about a week or two ago. Although it is inconvenient to have to go to File>Open and then locate the file to open it since I am used to doing it the other way at least it is a way to open the AI file. I just discoved that if I double click a graphic in a Adobe Acrobat Pro using the Edit Object I get the same error message. This is a problem.I have checked previous discussions about this and tried things like unchecking the "open as tab" option in the preferences but that does not work.
Creative Suite CS6
WindowsXP
View 5 Replies
View Related
May 26, 2011
I am currently experiencing this error when basically putting an Inventor 2012 file (part or assembly) on a flash drive and then loading the file(s) onto a different computer with Inventor 2011 installed. Once in Inventor 2011 and trying to open the necessary file(s) I receive this error. Is there some difference between the 2011 and 2012 files that is causing this to happen? Or the face that I am using the student version of both?
View 5 Replies
View Related
Sep 24, 2008
My computer went down two weeks ago, bad enough that I had to get a new hard drive and start over. When I went to install Inventor, I kept getting Errors 1335, 1334, then error 1406 during installation. I seemed to have gotten beyond those, but when I went to open certain assemblies I started getting "Error in reading RSe Stream (4 not equal 2)" and "Error in reading meta types in RSe Segment AmDcSegment in..." and them it shows a certain file it doesn't like, sometimes repeating for multiple files. I clicked on the communication icon in the lower right of my Inventor screen and it said a maintenance update was available. I installed SP1 and tried again. Same problem. I clicked on the icon again, and it told me SP2 was available. I installed it and tried again. Same problem. I clicked on the icon again, and it told me SP3 was available. I installed it and tried again. Same problem. I clicked on the icon again, and it told me SP4 was available. I installed it and tried again. Now I can't open Inventor at all. Inventor crashes just on trying to open up. I've been running Inventor 11 since it came out with no issues whatesoever. Now I'm two weeks behind with no end in sight.
View 9 Replies
View Related
Mar 10, 2014
i was trying to move some files via LR.I've researched and found that everyone else was able to fix their issue by moving the preview database out of LR, tried that but it doesn't fix the problem.I've moved all files except the new preview and catalog (only a single catalog) database from the Picture/ Lightroom folder.I've rebooted the computer several times and tried opening LR, still no joy.The size of my catalog is 3.8GBThe size of the preview is 6.5GB (77,186 files in 45,745 folders).This is a new install from scratch on a new PC,
Specs are:
Intel i7 4770
32GB memory
2 x 250GB SSD drive in RAID 1 for OS and apps
1 x 6TB SATA HDD for images in a RAID 5
1 x 5.3TB SATA HDD for final images in a RAID 5
I've had nothing but issues with this system since day 1, images transferred and they do not show up correcting inthe individual folders (especially 2012). Total image count is about 320,000
Seems to me that LR cannot handle the numbers although LR3.6 was a lot stable this version is shakey all over the place.
View 2 Replies
View Related
Feb 3, 2014
I've browsed a few previous forum questions and answers and it appears I might need to find my catalog and delete my preview cache file(s). However, I cannot find where these files are stored. A few of the forum responses said to go into Lightroom edit/preferences to find where these files are stored, but I cannot get into Lightroom. When I open it, it gives me the error message and I can't seem to get into edit to find where these files are stored.
Also, I'm relatively new to Lightroom (been using it for a little over a month, mostly just editing and not much for cataloging and organizing my photos)
View 5 Replies
View Related
Mar 29, 2014
When I try to open LR4 I get the message that LR has encountered an error reading the preview cache. I can't find the preview.irdata files to delete or clear.
View 2 Replies
View Related
