CorelDRAW Graphics Suite X6 :: Open PDF Error While Decoding Stream
Jan 10, 2013I get this error message when trying to open a PDF in CorelDraw X6: There was an error while decoding a stream. What might cause this?
View 3 Replies
ADVERTISEMENT
CorelDRAW Graphics Suite X5 :: Open Backup It Comes Up With Runtime Error And Won't Open?
May 1, 2012When designing brochures in X5, we quite often will save a file with no issues, but when we go to re-open it we end up with "encountered an improper arument" error message and the file is no longer able to be opened.
If you try to open the backup it comes up with a "runtime error" and won't open either. We are running Windows 7
CorelDRAW Graphics Suite X5 :: Error While Installation - No Graphics Shown
Dec 6, 2013After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
CorelDRAW Graphics Suite X4 :: When Open Some Files Which Takes Long Time To Open?
Aug 27, 2011I have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies View RelatedCorelDRAW Graphics Suite X4 :: Unable To Open Desired Folder By Clicking Open File
Feb 6, 2013In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: Cannot Open Files With (open) Command
Jan 25, 2013About a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
CorelDRAW Graphics Suite X6 :: How To Fix Error Code 998
Aug 1, 2012i had installed the coreldraw x6 and every thing went right until i open it when the instillation finished , and showed me error 998 !! and i had searched for an answer and i found an answer but didn't work . the answer was : install regcure pro and fix all problem but didn't work ...
View 11 Replies View RelatedCorelDRAW Graphics Suite X5 :: Gives CRC Error On Installation
Jul 16, 2011when i install corel draw its gives me an error that your setup file has an error it gives crc error and ask me to ignore or abort when i ignore its continue extraction butt when its extract then on installation its give errrors. i install trail version i download from different sites like from corel or downloadcnet.com but its give me same error when extraction
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: Won't Launch Error 0xc0000005
Jan 4, 2011After upgrading ATI graphics card driver, corel X5 wont launch at all neither will Paint.
ive tried re installations , repairs, un installing ATI driver, re installing corel, applying serv pack 1 and 2.
CorelDRAW Graphics Suite X6 :: Error In Cutting Design
Dec 3, 2013I have a problem with cutting the design, it actually prints it but not cut it. The error displays : Cut Data File Creation Error..
I'm using Corel Draw Graphics Suite X6, Raster Link, to print & cut using Mimaki CJV30-60..
What does the error actually mean & what do I need to do to resolve this?
CorelDRAW Graphics Suite X5 :: Error / System Has Not Been Modified
Jun 19, 2013I have downloaded the trial version of Paintshop Pro Ultimate X5 three times ans still get the above cryptic error.I am running Windows 7 64bit.
View 1 Replies View RelatedCorelDRAW Graphics Suite X6 :: Error When Signing In To Memberships
Aug 16, 2012I get an error when I try to sign in. I can go to the web page & sign in but if I try through CorelDRAW it gives me an unknown error as shown in the attached image.
View 16 Replies View RelatedCorelDRAW Graphics Suite X3 :: Error In Application Starting
Sep 16, 2011I've installed Corel Draw graphics suite x3. When i'm trying to run the application, it says "To start this application for the first time or to activate, log in using an administrator-level account. From then on, you can use any user account to start this application".
View 1 Replies View RelatedCorelDRAW Graphics Suite X5 :: Error Publishing To PDF File
Aug 29, 2011I am getting an error and crash when trying to publish to pdf file in X5.
View 3 Replies View RelatedCorelDRAW Graphics Suite X6 :: 16.1 - Undefined Error When Saving To PSD
Aug 17, 2012When saving to PSD i'm getting error with no description.
Design with around 20 layers with 3 text layers. What can be wrong?
Same file opened in COREL X5 saving without any errors.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:X6 VERSION: 16.4.0.1280
CorelDRAW Graphics Suite X6 :: Print Merge Error
Sep 14, 2012I just installed X6 64bits on my new Windows 7 64 bits machine, so far so good.
But when I try to use the Print Merge wizard, I get this error at the stage where I want to import the lost from an Excel sheet:
CorelDRAW Graphics Suite X5 :: Recurring PowerClip Error?
Jul 26, 2013I'm having an issue with PowerClip I never used to have in X3 (the last version I was able to afford).Basically, some small details in a graphic keep getting irreversibly lost due to PowerClip... I'm tracing over a drawing I scanned, and placing small details inside larger objects to keep my workspace clean. What's going on is, as I get to work on, say adding blends and gradients to a different part of my graphic, the next time I zoom out I notice the details I placed inside a container I wasn't currently working on are suddenly gone; They're not in the wireframe view for either the full image or within the container, and have simply vanished from the container, as though I never even made them. I make sure outlines are always converted to objects before I put them in a container, but I can't imagine it matters..PowerClip is one of my most-used tools and it'll really limit my abilities if I can't rely on it.
View 1 Replies View RelatedCorelDRAW Graphics Suite 12 :: How To Open EPS File
Nov 5, 2013Q When I import an EPS file into CorelDRAW, and print to a non-PostScript printer, the output appears pixelated and unclear. Why?
A An EPS file is a Postscript (PS) file and meant to be printed to a PostScript printer. When printed to a non-PostScript printer, it will only print the file header which is a low resolution preview of the actual file. If you wish to print the actual contents of the EPS file to a non-PostScript printer, import the file it into CorelDRAW using the PostScript Interpreted (PS, PRN, EPS) filter.So, apparently it can be done, but when I try to import this file into my Coreldraw, there is no option to import with that type of filter that I can see. Is this something that is missing in v12? If v12 wont do it, is there any other way to import this file without it coming in all pixellated? Or is there another way to convert the file into a format such as .plt?
CorelDRAW Graphics Suite X5 :: Cannot Open EPS File
Mar 31, 2011I'm trying to open an eps file in Coreldraw X5 and it's blank. Someone could try with illustrator? URl....
View 7 Replies View RelatedCorelDRAW Graphics Suite X5 :: Cannot Open Files
Jun 16, 2013I have looked at the galleries and saw some excellent pictures. Since then I no longer can open any file . I uninstalled Coreldraw 15 and even went to repair mode, still no luck. (I reinstalled and removed many times).
I reinstalled Coreldraw 14 and any file I work on and save and close I cannot open the file.
It seems I have picked up a virus from the pictures I uploaded from Corel gallery.
CorelDRAW Graphics Suite X5 :: Can't Open Any File
Jun 18, 2013I have been using Corel since 1989. I simply downloaded a pic from Corel gallery and even removed C15 many times still no joy. All hundreds of files are effected..
View 2 Replies View RelatedCorelDRAW Graphics Suite X6 :: Can't Open File
Sep 18, 2012I made a file in coreldraw x6 and unintentionally opened in corel X5. Obviously it didn't open. But apart from that, the file neither opens in corel x6 now!!!!
It seems it cant be opened or something like that. But anyway it still sizes 2,94MB, so I am hopeful to recover it.It was a lot of work for me wasted. I tried to convert it to x5 format in URL....
CorelDRAW Graphics Suite X5 :: More Than 1 Open File?
Mar 22, 2012When I want to flick from one file to another in X5 draw the tab to bring up the second file is hidden behind the open one, is there a way or a short cut to save me having to minimise my open file to see the tab to maximise the second?
View 4 Replies View RelatedCorelDRAW Graphics Suite X4 :: Crashing When Using Text (C++ Runtime Error)
Sep 19, 2011I am currently experiencing a big problem when using X4 which is causing some major headaches here in the Workplace!
Whenever I hit space, paste text or do anything involving fonts I get a Microsoft Visual C++ Runtime Error folowed by a non-responding dialog with force close.
I have been using X4 for some years now and not sure what has caused this issue, it was fine in the morning and stopped working in the afternoon.
I have SP2 installed and no changes have been made to any settings to cause this.
X4 is the main programme I use here at work and this problem is grinding the place to a halt.
CorelDRAW Graphics Suite X5 :: Error Message - Event Name APPCRASH
Jun 10, 2013I have just started getting this message when I am using X-5
The message say's CorelDraw has stopped working and then it has the following,
problem event name APPCRASH
CorelDRAW Graphics Suite X3 :: Error Reading Bitmap In File?
Jan 9, 2009I'm using Coreldraw X3,operating system, Windows XP Professional version 2002, 1GB of RAM,free space of 4.56GB on C drive, 34.8GB on backup drive,display adapter Radeon X300,HP compaq dc7600 convertibleI'm having a lot of difficulties opening a series of files. I had been working on a laptop for a few months and upon returning to the office I tansfered the files to my desktop to complete thr final revisions. I worked on my desktop for 3wks without no problems and then one day I went to open the files and recieved this message on all of them:"Error reading a bitmap in file"I have since tried numerous methods with no success.
View 13 Replies View RelatedCorelDRAW Graphics Suite X5 :: Install Error Code 1719?
Jan 15, 2012how or why I am getting this error code when I try to install my software. I bought Coreldraw Graphics Suite X5 from a seller on Ebay. It is supposed to be new but it was opened package.
View 1 Replies View RelatedCorelDRAW Graphics Suite 12 :: Application Error / The Memory Could Not Be Read
Oct 15, 2007I've got the following error message when I try to open CD file on Windows 2003 using CD 12.
" CORELDRW.EXE - Application Error
The instruction at "0x016ae2df" referenced memory at "0x00000006". The memory could not be "read".
Click on OK to terminate the program "
It's showing when I open .cdr file.Sometimes it is showing from time to time, but on some files it's showing everytime.
CorelDRAW Graphics Suite X5 :: Error Running Macro Using Symbols
Sep 28, 2011I am new at creating a recorded macro in Corel X5..I have done the steps to record a macro for changing a text colour within a symbol...i get an error debug message ActiveShape.Shapes(26).PowerClip.EnterEditMode
what i want to do is change a coloured text from black to white that is symbol. i have several different text that are in symbol and it is a pain to enter each one and change a colour.
CorelDRAW Graphics Suite X4 :: Recover CDR Files That Won't Open?
Mar 10, 2010Half a year ago I started on a project with a CD-cover that wasn't finished. Now when I want to open them, It's impossible. If I click on the files X4 opens and immediately crashes. On all CDR files. Same thing with X5. but I can open a CDR file in the folder next to this. Even the backup files seem to be corrupt. The CPT-files do however open fine.
If I start the program first and then open or import a CDR file, the progress bar halts at about 50 % and then nothing much happens.
Any chance of recovering the files, or do I have to rebuild everything?
I know one strange thing happened when I created the first file. I saved the Digipak format as a new page format and then that format stuck as default page size. I tried many times to reset it to A4, but I didn't succeed with that until I reset the workspace.
I checked the CDR files in ZIP format. In the XML file I coud see that the industry was identified as "music". How could that happen?
CorelDRAW Graphics Suite 12 :: Can't Save And Open CDR Files
Dec 19, 2011I just replaced the hard drive in my laptop. I have installed Coreldraw 12 again and it opens and works fine.
Problem is when I create and save a file. The file appears on the desktop ( if that is where I save it ) but it has an odd icon with a red A on the bottom corner. If I click on it, I get a "not a valid win32 application" message.
However if I open Corel12 and import the file, it appears to be fine.