I have just started getting this message when I am using X-5
The message say's CorelDraw has stopped working and then it has the following,
problem event name APPCRASH
I am using Corel Graphic Suite X3. I created one file of 330 MB. It contains text and images....
But now when i am opening this file it say "File contains Invalid Object" "IGNORE:ABORT:RETRY"..I chose every option but nothing seems to happen and corel draw gets hanged..I tried importing it..also i tried re installing it but nothing seem to work...
this file is very imp and i have to open it...Wht to do? Also any future precautions, if any?
And am i using the right version? Im mean is is because this is the lower version and i need 2 upgrade?
I came across an interesting problem. I was using PaintShop Pro to import a RAW image from my camera, then export as a TIF for use in CDGS X6. When I tried to import the file into CorelDRAW or PhotoPaint, I got an error message:
(X) Invalid compress data
I could see a thumbnail image in WIndows, and I could open the file in IrfanView. Re-saving the TIF from IrfanView allowed me to open it in CDGS.
I thought the problem was with PSP, and reported the issue to the product team, but then I tried exporting the same TIF from PhotoPaint (from the same RAW image file), and when I tried to re-open the TIF, I got the same error. So PhotoPaint could not read the TIF exported from... PhotoPaint!
Smaller files don't seem to be an issue, but my camera files are in the neighborhood of 5000x3000 pixels, and the TIF files weigh in at around 50MB.
I have tried to get Photoshop CS4 to run but keep getting Photoshop has stopped working. In 64bit the error message is
Problem Event Name: BEX64
Application Name: Photoshop.exe
Application Version: 11.0.0.0
Application Timestamp: 48d38aa7
Fault Module Name: StackHash_a1a9
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0000000000000000
Exception Code: c0000005
Exception Data: 0000000000000008
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 2057
Additional Information 1: a1a9
Additional Information 2: 97adcf723889235ddc4cb6cacaa74283
Additional Information 3: 8a4c
Additional Information 4: 9cfa5bc339a5d29061908def628328bc
in 32bit the error message is
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 11.0.0.0
Application Timestamp: 48d3882e
Fault Module Name: StackHash_fd00
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 00000000
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 2057
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
I have uninstalled/reinstalled Photoshop and deleted the preference files to no avail. I have also used Adobe CS4 Clean Script along with Microsoft Windows Installer CleanUp Utility to no avail.
I have installed Photoshop CS3 which seems to work except when I try to access the preference files when it crashes.
My system spec is
OS Vista Ultimate x64 SP1
CPU Intel Core 2 Quad Q660 2.40GHz
Motherboard Asus P5QL-E
Memory 8 Gbt
Graphics Card Asus EAH 4850
In CorelDraw X5, I consistently at times receive an error message stating "File Copy Error. TEMP Drive or Output Drive may be full". My temp drives have all been emptied. How to overcome this error message?
View 1 Replies View Relatedi want to make a promotional flyer for a party event coming up and i will be working with photos and other bitmap images. is this possible in corel or photo paint?
View 2 Replies View RelatedI'm getting several messages saying "value on wrong side of alignment" when I rebuild my corridor. I've checked the two target alignments that I'm using and they are on the correct side.
Civil 3D 2014
during a PDF export I get a message that a Bitmap could not be found.
View 4 Replies View RelatedWith the code below, I can delete off-page objects...as long as they are assigned the Desktop layer. If there is no object on that layer, I want a warning box to pop up stating so. How can I do this? I imagine that I'll need If then statement something like 'If .....objects on layer Desktop <0 then pop up warning message box, end if.
Private Sub CommandButton4_Click() ActiveDocument.BeginCommandGroupActiveDocument.MasterPage.DesktopLayer.Shapes.All.Delete ActiveDocument.EndCommandGroupEnd Sub
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
A couple of days ago my photoshop will constantly crash with the "appcrash"/stopped working message, usually while i'm minding my own business painting however this problem has rendered photoshop virtually unusable.
the report is as follows:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 13.0.0.0
Application Timestamp: 4f61c045
Fault Module Name: Photoshop.exe
[code]....
I'm running win 7, 8gb ram, i5 3750k and a gtx 560ti..i've tried reinstalling several times, deleting preferences, updating graphic drivers to no avail.
Photoshop elements 11 running windows 7, have been using Photoshop elements 11 for approximately a year, this morning can't get it to launch, get the message program has stopped working with the APPCRASH problem message. Tried resetting to default preferences and shutting offf the firewall, still the same.
View 1 Replies View Relatedi had installed the coreldraw x6 and every thing went right until i open it when the instillation finished , and showed me error 998 !! and i had searched for an answer and i found an answer but didn't work . the answer was : install regcure pro and fix all problem but didn't work ...
View 11 Replies View Relatedwhen i install corel draw its gives me an error that your setup file has an error it gives crc error and ask me to ignore or abort when i ignore its continue extraction butt when its extract then on installation its give errrors. i install trail version i download from different sites like from corel or downloadcnet.com but its give me same error when extraction
View 3 Replies View RelatedAfter upgrading ATI graphics card driver, corel X5 wont launch at all neither will Paint.
ive tried re installations , repairs, un installing ATI driver, re installing corel, applying serv pack 1 and 2.
I have a problem with cutting the design, it actually prints it but not cut it. The error displays : Cut Data File Creation Error..
I'm using Corel Draw Graphics Suite X6, Raster Link, to print & cut using Mimaki CJV30-60..
What does the error actually mean & what do I need to do to resolve this?
I have downloaded the trial version of Paintshop Pro Ultimate X5 three times ans still get the above cryptic error.I am running Windows 7 64bit.
View 1 Replies View RelatedI get an error when I try to sign in. I can go to the web page & sign in but if I try through CorelDRAW it gives me an unknown error as shown in the attached image.
View 16 Replies View RelatedI've installed Corel Draw graphics suite x3. When i'm trying to run the application, it says "To start this application for the first time or to activate, log in using an administrator-level account. From then on, you can use any user account to start this application".
View 1 Replies View RelatedI am getting an error and crash when trying to publish to pdf file in X5.
View 3 Replies View RelatedWhen saving to PSD i'm getting error with no description.
Design with around 20 layers with 3 text layers. What can be wrong?
Same file opened in COREL X5 saving without any errors.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:X6 VERSION: 16.4.0.1280
I just installed X6 64bits on my new Windows 7 64 bits machine, so far so good.
But when I try to use the Print Merge wizard, I get this error at the stage where I want to import the lost from an Excel sheet:
I'm having an issue with PowerClip I never used to have in X3 (the last version I was able to afford).Basically, some small details in a graphic keep getting irreversibly lost due to PowerClip... I'm tracing over a drawing I scanned, and placing small details inside larger objects to keep my workspace clean. What's going on is, as I get to work on, say adding blends and gradients to a different part of my graphic, the next time I zoom out I notice the details I placed inside a container I wasn't currently working on are suddenly gone; They're not in the wireframe view for either the full image or within the container, and have simply vanished from the container, as though I never even made them. I make sure outlines are always converted to objects before I put them in a container, but I can't imagine it matters..PowerClip is one of my most-used tools and it'll really limit my abilities if I can't rely on it.
View 1 Replies View RelatedI removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
I am currently experiencing a big problem when using X4 which is causing some major headaches here in the Workplace!
Whenever I hit space, paste text or do anything involving fonts I get a Microsoft Visual C++ Runtime Error folowed by a non-responding dialog with force close.
I have been using X4 for some years now and not sure what has caused this issue, it was fine in the morning and stopped working in the afternoon.
I have SP2 installed and no changes have been made to any settings to cause this.
X4 is the main programme I use here at work and this problem is grinding the place to a halt.
I get this error message when trying to open a PDF in CorelDraw X6: There was an error while decoding a stream. What might cause this?
View 3 Replies View RelatedI'm using Coreldraw X3,operating system, Windows XP Professional version 2002, 1GB of RAM,free space of 4.56GB on C drive, 34.8GB on backup drive,display adapter Radeon X300,HP compaq dc7600 convertibleI'm having a lot of difficulties opening a series of files. I had been working on a laptop for a few months and upon returning to the office I tansfered the files to my desktop to complete thr final revisions. I worked on my desktop for 3wks without no problems and then one day I went to open the files and recieved this message on all of them:"Error reading a bitmap in file"I have since tried numerous methods with no success.
View 13 Replies View Relatedhow or why I am getting this error code when I try to install my software. I bought Coreldraw Graphics Suite X5 from a seller on Ebay. It is supposed to be new but it was opened package.
View 1 Replies View RelatedI've got the following error message when I try to open CD file on Windows 2003 using CD 12.
" CORELDRW.EXE - Application Error
The instruction at "0x016ae2df" referenced memory at "0x00000006". The memory could not be "read".
Click on OK to terminate the program "
It's showing when I open .cdr file.Sometimes it is showing from time to time, but on some files it's showing everytime.
I am new at creating a recorded macro in Corel X5..I have done the steps to record a macro for changing a text colour within a symbol...i get an error debug message ActiveShape.Shapes(26).PowerClip.EnterEditMode
what i want to do is change a coloured text from black to white that is symbol. i have several different text that are in symbol and it is a pain to enter each one and change a colour.
Upon startup of CorelDraw X4, I get an error message and the debugger opens (macro) and highlights a line of code in the Recent Files macro. I suspect it may be a Windows 7 update since about 15 updates were installed today.
P.S. - resetting workspace by pressing F8 at startup is not an option.
