AutoCAD Inventor :: Error In Reading RSe Stream
May 26, 2011
I am currently experiencing this error when basically putting an Inventor 2012 file (part or assembly) on a flash drive and then loading the file(s) onto a different computer with Inventor 2011 installed. Once in Inventor 2011 and trying to open the necessary file(s) I receive this error. Is there some difference between the 2011 and 2012 files that is causing this to happen? Or the face that I am using the student version of both?
View 5 Replies
ADVERTISEMENT
Sep 24, 2008
My computer went down two weeks ago, bad enough that I had to get a new hard drive and start over. When I went to install Inventor, I kept getting Errors 1335, 1334, then error 1406 during installation. I seemed to have gotten beyond those, but when I went to open certain assemblies I started getting "Error in reading RSe Stream (4 not equal 2)" and "Error in reading meta types in RSe Segment AmDcSegment in..." and them it shows a certain file it doesn't like, sometimes repeating for multiple files. I clicked on the communication icon in the lower right of my Inventor screen and it said a maintenance update was available. I installed SP1 and tried again. Same problem. I clicked on the icon again, and it told me SP2 was available. I installed it and tried again. Same problem. I clicked on the icon again, and it told me SP3 was available. I installed it and tried again. Same problem. I clicked on the icon again, and it told me SP4 was available. I installed it and tried again. Now I can't open Inventor at all. Inventor crashes just on trying to open up. I've been running Inventor 11 since it came out with no issues whatesoever. Now I'm two weeks behind with no end in sight.
View 9 Replies
View Related
Aug 10, 2012
I have just got this error message 'Error in reading RSe stream (4 not equal 0)' after checking out my assembly, and it appears the cause is a small hss part in Frame Generated frame.
The part appears in my tree in the frame assembly and it not showing up in my model, I can't delete it to brake the link.
View 3 Replies
View Related
Sep 9, 2013
The error message has popped up on models, and assemblies, but no parts.
something on the internet said that this may be due to saving in a newer version on inventor, but i am using the latest version, and have been for the past few months. it is especially confusing as on of my drawings is only affected on one page, not the entire drawing. i have also had bad assemblies, but when the bad assembly is a sub assembly inside a bigger assembly its all fine!
View 3 Replies
View Related
Oct 25, 2012
I'm getting the following error:
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
View 4 Replies
View Related
Oct 12, 2012
what does this message mean: "Load from stream error"? It appears all the time and I cannot put any picture in the timeline. Some pictures are white with two black crossed lines.
View 1 Replies
View Related
Mar 28, 2011
when i upload klips to the libary i recive this massage "load from stream error" what is thate?and what i must to do to not receive this massage?
View 3 Replies
View Related
May 26, 2011
I bought a full copy of Videostudio Pro X4 about a month ago after experimenting with the trial version for a good while, and it was all running smoothly until I was adding some rain effects to a rather large movie, and it said something along the lines of not enough space to load something, and then all the FX thumbnails disappeared. When i closed the program and tried to reopen it, it said "Error loading from stream" followed by a "Videostudio Pro has encountered an unspecific error and needs to close, please contact Corel Support and include a copy of the Dump file.". And now every time I try to load the program it gives me this error, and thats without loading the actual project that the file had the initial error on. All the files within the folder were captured via VS either as Video or as Stop-Motion so are under the default settings as I havent changed them or converted them atall.
I cant find anything on the knowledge base about this, and neither on these forums. I'm unsure how I send the Dump File, which I have found to Corel? I'm abit confused from the warranty support bit of the page where it says about having a one-off chance to contact them? So obviously I dont want to mess up my one chance so thought I'd check here what to do next!
A re-install of the program seems the logical next step but will I lose my project?
View 3 Replies
View Related
Mar 1, 2012
Along with giving me a failure after closing telling me to send my dmp file to Corel, but Corel not showing me anyway to do this, my newest error is the best one yet. The program opens with a little window saying "Load from Stream Error" and an OK button. The OK button does nothing. Nothing else can be used. The computer is totally locked up with this wonderful piece of unfinished program in place. My only recourse is to power the computer off manually to restart it. starting VS"pro"4U just locks it down again. Is there a way to clear this without following Corels instructions for every problem. That being to remove and reload the program. The next time I remove it will be to throw it and it's boxed installation disk in the trash can, then go out and buy something a bit more reliable. Like Adobe's little girl Premier, or Sony's video editing program.
This looks so nice, if it just worked. I have quite a few hours into a video and just wanted to add a new title when this started.
View 3 Replies
View Related
Oct 23, 2013
For some inexplicable reason, the 'Smartsounds' tracks I load into the time line do not RENDER. That is, the 'share' button creates the suitable video file without the music! Their is a message, "Load from Stream Error" which comes up after the rendering process.
View 6 Replies
View Related
Jan 10, 2013
I get this error message when trying to open a PDF in CorelDraw X6: There was an error while decoding a stream. What might cause this?
View 3 Replies
View Related
Dec 11, 2012
How can I remove libraries without causing Load Stream Error. Should I delete all the contents first? I have created several libraries for my individual projects but whenever I have finished with one and try to remove (delete) it I get this error message and have to reset to factory defaults. This means losing the libraries I still want to use.
View 3 Replies
View Related
May 21, 2012
Error message showing on Video Studio Pro X2 - when go into edit, pop up message dispays 'Load From Stream Error' which then doesn't allow me to anything further.
View 5 Replies
View Related
Mar 26, 2013
have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.
View 2 Replies
View Related
Jul 18, 2012
Some users are getting the following error when running Script Pro:
Error while reading log file for <drawing path>
View 4 Replies
View Related
Aug 13, 2012
I´m having this error Error fatal Unhandled access violation reading 0x258a000 Exception at 1318228h and then Insufficient memory - shutting down.
View 5 Replies
View Related
Aug 1, 2013
I have C3D2009 with service packs 1,2 and 3 installed in my computer with Windows XP operating system.
I am having fatal error when I try to export a dwg file to 2007 DXF file. I receive the following message:
" Fatal Error: Unhandled Access violation reading Oxfcf064fd Exception at fcf064fdh"
Attached, please find the dwg file I am trying to convert to 2007 DXf file.
View 1 Replies
View Related
Nov 3, 2013
so i've been getting this pop up window everytime i try to open autocad today. yesterday night i was using it fine.now whenever i try to open the program, it says "fatal error unhandled access violation reading b14c4b12h"..i sent an error report to autodesk and they suggested a patch. and after restarting my pc its still not working.
i have win8.1 with autocad2014.it pisses me off koz i have school assignments to do and it's not working
View 9 Replies
View Related
Aug 7, 2012
I'm using Autocad 2013, when I open my existing files this appear and program shut down
“Fatal Error: Unhandled Access Violation Reading 0xc075ddf8 Exception at e6197bd9h”
Attached herewith is a screenshot
View 5 Replies
View Related
Sep 3, 2013
Having a problem with AutoCAD Civil 3D 2012 which keeps crashing with a fatal error on a Win7 Pro (64) machine. Was able to get the user to make a screenshot on the most recent occasion, and the error was as follows:
FATAL ERROR: Unhandled Access Violation Reading 0x0014 Exception at f5a69bb9h.
Having looked through your forums I see that this may be related to the video card, which is a Nvida Quadro 5000. I've already updated the driver to the Quadro Performance Driver, v320.78, but the problem continues.
Is there a different partner certified driver that I should be using (can't seem to find any for Civil 3D) , or is the issue related to something else?
View 4 Replies
View Related
Dec 30, 2013
I'm recieving this error when I go to paper space and attempt to set my profile view. I am working for a consultant using a required template from the city and when I open just the main template I recieved a message about 10 errors, do I want to recover, so I do and it finds no errors but I continually get the message. I'm thinking that fatal error message has something to do with the 10 errors. what those fatal error codes are in the subject line?
View 1 Replies
View Related
Aug 1, 2013
My AutoCAD LT 2004 is crashing soon after opening with the message:
fatal error Unhandled Access violation Reading 0x0054 Exception at 72c214h
View 1 Replies
View Related
Aug 4, 2013
I have LT2004 operating on 2 separate machines
Both have been working perfectly
On one machine only after opening AutoCAD approximately 1 minute later AutoCAD closes down and presents error message box
Unhandled Violation Reading 0x0054 Exception at 72c214h
This happens on one machine only
I have tried reloading, removing and reloading but with no success
View 1 Replies
View Related
Oct 7, 2012
When opening the navigation bar, the error message: unhandled exception error C0000005 (Access Violation Reading 0x0144) at address 5E03F5BFh or 5DFAF5BFh. What does this mean? The program (AutoCAD 2012 student version German 64 Bit) crashes as well when creating a new file and open the existing files in the registry file Karter. I have a Toshiba Satellite C660-29V with "IntelCore i3" processor and Windows 7- 64 Bit. Graphics Controller: Intel (R) HD Graphics Core (i3). Driver: Driver Version: 8.15.10.2189 Driver Date: 28.07.2010
How can I fix it so that AutoCAD 2012 running properly?
View 5 Replies
View Related
Feb 7, 2013
My AutoCAD is crashing everytime I try recover a site plan from a GC.
View 4 Replies
View Related
Aug 13, 2013
There are specific files in which will cause this fatal error to come up:
"FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at 5c88cd29h"
I am using AutoCAD 2010. I am able to open the file in other computers in the office, even in another AutoCAD 2010, but it consistently gives me this error on my machine. I've tried purging the file and recovering it, but nothing seems to work.
View 1 Replies
View Related
Dec 16, 2013
I am getting a fatal error message "Unhandled Access Violation Reading 0x0038 Exception at e9a85402h". I was working on a drawing Friday afternnon and the error popped up and crashed Civil 3d. I could open Civil 3d, but when I tried to open the drawing in question, the error would occur and crash Civil 3d. I started a new drawing and inserted the old drawing as a block. That had been working all morning, but all of a sudden the same error started to occur again. What is the error?
View 2 Replies
View Related
Jun 3, 2013
Running Civil CD 2012 on Windows 7. All service packs are up to date. After creating plan over profile sheets, I click to open a Layout tab to view a sheet, and get this error.
View 9 Replies
View Related
Feb 27, 2013
I recently installed AutoCAD 2013 onto my computer which has windows 7 64 bit operating system. After completing installation, I tried to open AutoCAD and immediately I recieved this error, "Fatal error: Unhandled Access violation Reading 0xffffffff Exception at 70cbe8e1h.
View 9 Replies
View Related
Mar 8, 2013
I checked almost everywhere but there is no error i get .. Fatal Error : Unhandled Access Violation Reading 0xffffffff Expection at faad0004h .. I removed all the files and installed again but did not work ..
View 7 Replies
View Related
Jan 28, 2013
I have continuously been receiving Fatal Error codes following with my AutoCAD to crash by just saving my drawing.
FATAL ERROR: Unhandled Access Violation Reading 0x53fefc14 Exception at ed091e2bh.
FATAL ERROR: Unhandled Access Violation Reading 0x9ffd3a31 Exception at f797dcf9h.
Also, i having Runtime Error. R6025 - Pure Virtual function call.
I have repaired, uninstalled and reinstalled AutoCAD. I use Windows 7 64 bit. Everything is up to date.
View 5 Replies
View Related
