VideoStudio :: Error Loading From Stream Startup?
May 26, 2011
I bought a full copy of Videostudio Pro X4 about a month ago after experimenting with the trial version for a good while, and it was all running smoothly until I was adding some rain effects to a rather large movie, and it said something along the lines of not enough space to load something, and then all the FX thumbnails disappeared. When i closed the program and tried to reopen it, it said "Error loading from stream" followed by a "Videostudio Pro has encountered an unspecific error and needs to close, please contact Corel Support and include a copy of the Dump file.". And now every time I try to load the program it gives me this error, and thats without loading the actual project that the file had the initial error on. All the files within the folder were captured via VS either as Video or as Stop-Motion so are under the default settings as I havent changed them or converted them atall.
I cant find anything on the knowledge base about this, and neither on these forums. I'm unsure how I send the Dump File, which I have found to Corel? I'm abit confused from the warranty support bit of the page where it says about having a one-off chance to contact them? So obviously I dont want to mess up my one chance so thought I'd check here what to do next!
A re-install of the program seems the logical next step but will I lose my project?
View 3 Replies
ADVERTISEMENT
May 31, 2013
I use Illustrator CS4 a few years already. Last week I couldnt open my .ai anymore: at the startup I have an error:
Error loading plugins
appbarcontrolsplugin.aip
asset mgmt.aip
fxgfileformat.aip
navigator.aip
photoshopexport.aip
photoshopimport.aip
sangam2aimapper.aip
scriptingsupport.aip
scriptmenu.aip
services.aip
welcomescreen.aip
I already installed all adope programmes again, after de-installing it.
View 1 Replies
View Related
Oct 12, 2012
what does this message mean: "Load from stream error"? It appears all the time and I cannot put any picture in the timeline. Some pictures are white with two black crossed lines.
View 1 Replies
View Related
Mar 28, 2011
when i upload klips to the libary i recive this massage "load from stream error" what is thate?and what i must to do to not receive this massage?
View 3 Replies
View Related
Mar 1, 2012
Along with giving me a failure after closing telling me to send my dmp file to Corel, but Corel not showing me anyway to do this, my newest error is the best one yet. The program opens with a little window saying "Load from Stream Error" and an OK button. The OK button does nothing. Nothing else can be used. The computer is totally locked up with this wonderful piece of unfinished program in place. My only recourse is to power the computer off manually to restart it. starting VS"pro"4U just locks it down again. Is there a way to clear this without following Corels instructions for every problem. That being to remove and reload the program. The next time I remove it will be to throw it and it's boxed installation disk in the trash can, then go out and buy something a bit more reliable. Like Adobe's little girl Premier, or Sony's video editing program.
This looks so nice, if it just worked. I have quite a few hours into a video and just wanted to add a new title when this started.
View 3 Replies
View Related
Oct 23, 2013
For some inexplicable reason, the 'Smartsounds' tracks I load into the time line do not RENDER. That is, the 'share' button creates the suitable video file without the music! Their is a message, "Load from Stream Error" which comes up after the rendering process.
View 6 Replies
View Related
Dec 11, 2012
How can I remove libraries without causing Load Stream Error. Should I delete all the contents first? I have created several libraries for my individual projects but whenever I have finished with one and try to remove (delete) it I get this error message and have to reset to factory defaults. This means losing the libraries I still want to use.
View 3 Replies
View Related
May 21, 2012
Error message showing on Video Studio Pro X2 - when go into edit, pop up message dispays 'Load From Stream Error' which then doesn't allow me to anything further.
View 5 Replies
View Related
Aug 31, 2012
I have an image that loads every time I startup Photoshop CS6. I delete it and work on other images then quit. When I restart the same image opens upon startup even though I have not worked on it and I have deleted it. How do I stop this from happening?
View 8 Replies
View Related
Mar 15, 2014
PremierePro CS6 was working fine until I updated an unrelated dll file for another (audio editing) program.
The file is a VST: Kontakt 5 8out.dll (Native Instruments).
Although PremierePro is suppose to be able to use 3rd party VSTs they usually crash for me so I export the audio, edit it, then reimport it.
How can I start PPro bypassing all plugins, then disable them?
View 1 Replies
View Related
Jan 21, 2010
When I start up my GIMP in windows, it indexes the fonts every first time that I start after a reboot.I am using windows 7, is there anyway to tell gimp not to index the fonts ?
View 14 Replies
View Related
May 26, 2011
I am currently experiencing this error when basically putting an Inventor 2012 file (part or assembly) on a flash drive and then loading the file(s) onto a different computer with Inventor 2011 installed. Once in Inventor 2011 and trying to open the necessary file(s) I receive this error. Is there some difference between the 2011 and 2012 files that is causing this to happen? Or the face that I am using the student version of both?
View 5 Replies
View Related
Sep 24, 2008
My computer went down two weeks ago, bad enough that I had to get a new hard drive and start over. When I went to install Inventor, I kept getting Errors 1335, 1334, then error 1406 during installation. I seemed to have gotten beyond those, but when I went to open certain assemblies I started getting "Error in reading RSe Stream (4 not equal 2)" and "Error in reading meta types in RSe Segment AmDcSegment in..." and them it shows a certain file it doesn't like, sometimes repeating for multiple files. I clicked on the communication icon in the lower right of my Inventor screen and it said a maintenance update was available. I installed SP1 and tried again. Same problem. I clicked on the icon again, and it told me SP2 was available. I installed it and tried again. Same problem. I clicked on the icon again, and it told me SP3 was available. I installed it and tried again. Same problem. I clicked on the icon again, and it told me SP4 was available. I installed it and tried again. Now I can't open Inventor at all. Inventor crashes just on trying to open up. I've been running Inventor 11 since it came out with no issues whatesoever. Now I'm two weeks behind with no end in sight.
View 9 Replies
View Related
Aug 10, 2012
I have just got this error message 'Error in reading RSe stream (4 not equal 0)' after checking out my assembly, and it appears the cause is a small hss part in Frame Generated frame.
The part appears in my tree in the frame assembly and it not showing up in my model, I can't delete it to brake the link.
View 3 Replies
View Related
Jul 26, 2012
How to stream HD videos to Apple TV 3?
View 2 Replies
View Related
Jul 17, 2013
AutoCAD 2014 isn't loading lisp routines when put in the start up suite.
They are loaded from a trusted location.
View 5 Replies
View Related
Jan 10, 2013
I get this error message when trying to open a PDF in CorelDraw X6: There was an error while decoding a stream. What might cause this?
View 3 Replies
View Related
Sep 9, 2013
The error message has popped up on models, and assemblies, but no parts.
something on the internet said that this may be due to saving in a newer version on inventor, but i am using the latest version, and have been for the past few months. it is especially confusing as on of my drawings is only affected on one page, not the entire drawing. i have also had bad assemblies, but when the bad assembly is a sub assembly inside a bigger assembly its all fine!
View 3 Replies
View Related
Apr 30, 2011
I recorded a video from my TV and during recording everything looks normal.
However, when I play back the recording, everything is sped up. I can use VLC Media player to slow down the playback speed to normal, but I can't figure out why the recorded stream is faster than normal. Even when I burn the video to DVD, playback is faster than it should be.
Most streams recorded are played back just fine. Could it be that the source stream for this particular video is different than most and if so, how do I get VS to compensate for this?
Can I use VS to play it back at the correct speed and rerecord the recorded stream?
View 2 Replies
View Related
Feb 6, 2012
I am using Corel Video Studio Pro x4 Ultimate with SP2 and I getting significantly lower audio volume in left channel for all stereo downmix streams. The problem is consistent regardless if I make an AVCHD video with background music, or create slide show form still images with music.
I want to eliminate any possible PC setup or installation issues and narrow down the problem to program itself. I have attached sample of stereo 1 KHz 0db test tone, which could be used for this test.
1. Open new project
2. Choose Settings --> Enable 5.1 Surround sound and Wide screen 16:9
3. Import to the library few pictures and 1KHz 0dB.wav
4. Place on the time line pictures (I used 5 sec duration for display and 1 sec cross-fade transition)
5. Add 1 KHz 0 dB.wav to the Music track
6. Select Share tab --> Create Video file --> Custom
7. Choose MPEG Transport Stream .m2ts
8. Select Options --> General 1920x1080 --> 29pfs --> upper field first
9 Select Compression --> Quality 100% --> Dolby Digital Audio --> 3/2 (L,C,R,SL, RL) --> 448 kbps --> OK
4. Name the file and save it.
5. Play rendered file on 2 speaker system (TV or PC)
Playing 5.1 surround sound movies on 2 speaker (i.e. stereo) system will likely force to play Stereo downmix stream only from 5.1 sound. You then should be able to observe that the left channel volume is reduced by -14 dB. (at least this is what I get) which causes significant stereo balance shift.The same test can be done with music files, but if you want to measure the volume drop, test tone is the best way to quantify it.
View 5 Replies
View Related
Nov 23, 2013
This message keeps appearing when I start Photoshop CC on my MAC. I don't see a Photoshop installer anywhere.One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing. Please run the Photoshop installer and re-install Photoshop.
View 8 Replies
View Related
Jun 11, 2008
have the CS3 suite, education version and i'm having problems whit photoshop. All the other programs work fine (flash, fireworks, premiere, etc), but photoshop crashes at startup.
I already disabled plugins, checked permissions, everything i can remember. The problems exists with domain and local (power and normal) users. Photoshop runs with local administrator but not with a domain admin, and i don't have any kind of policie restricting the domain admins.
The error is a "Runtime error" at the end of the loading, right after "Building menus".
Details of the error report:
AppName: photoshop.exe AppVer: 10.0.1.0 ModName: scriptingsupport.8li
ModVer: 10.0.0.0 Offset: 0015eebd
View 2 Replies
View Related
Sep 10, 2008
CS3 seems to start normally, and suddenly get this error:
Adobe Photoshop CS3: Photoshop.exe - Unable To Locate Component (title bar
of error dialog)
This application has failed to start because MFC71.DLL was not found.
Re-installing the application may fix this problem.
View 6 Replies
View Related
Feb 24, 2014
I've recently updated CC from 12.1 to 12.2 and I cannot launch it anymore. After Effects launches its UI and after 2-3 seconds it crashes without any error message or crash log. My specs:
Windows 7 Home Premium 64bit
Intel Core i5 3450 3.1GHz
Geforce GTX 560
Gigabyte P67A-D3-B3 motherboard
16GB ram
I've already reinstalled After Effects about 4 times, deleted media cache, deleted preferences, updated graphics drivers, rebooted my PC dozens of times but I still can't run it.
View 2 Replies
View Related
Mar 15, 2014
It's done this twice before, but has been fine lately. I have a last-minute deadline job that just came in and I can't get AE to even start! Last time this happened, I just kept trying and after about 15 attempts, it launched...not doing that this time.
View 4 Replies
View Related
Jan 14, 2013
Recently I have been receieving the following error message when Photoshop CS6 x64 srtarts up on my Windows 7 machine. Ps resides on my SSD.
I don't always get the message but when I press X, Cancel, Try Again, or Continue the message repeats until finally Ps starts. I'm not sure what drive DeviceHarddisk3Dr3 is supposed to mean.
View 1 Replies
View Related
Jul 9, 2008
I get the following message almost, but not every, time that I start Photoshop.
b This application has failed to start because vfzcore.dll was not found. Re-installing the application may fix this problem.
I have tried reinstalling Photoshop. But this does not help. I often also get a windows error after photoshop is closed saying that it did not shut down properly.
I suspect that the vfzcore.dll error is due to some 3rd party plug-in. But does anyone have any ideas? These error do not appear to affect the performance of photoshop that I can tell. Everything that I use works fine and it never bombs off (except after closing the program out). But having to hit "OK" at the error dialog every time the program starts up is annoying.
View 6 Replies
View Related
Jun 14, 2012
Every since installing 2013 on my iMac system, I get a pop-up window everytime the computer boots up. Here's the message:
Insecure Startup Items folder detected. Items in the Startup Items folder (“/Library/StartupItems/”) have not been started because the folder does not have the proper security settings.
View 3 Replies
View Related
Aug 13, 2011
I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.
I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.
I have uninstalled and then reinstalled. Again, to no avail.
VSX4 creates a dump file each time, which I can't view in any software I have.
I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!
View 2 Replies
View Related
Apr 25, 2012
I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.
I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.
I have uninstalled and then reinstalled. Again, to no avail.
VSX4 creates a dump file each time, which I can't view in any software I have.
I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!
View 1 Replies
View Related
Jun 26, 2013
X6, how to disable "what's new" at startup? tx
View 4 Replies
View Related
