I have an image that loads every time I startup Photoshop CS6. I delete it and work on other images then quit. When I restart the same image opens upon startup even though I have not worked on it and I have deleted it. How do I stop this from happening?
View 8 RepliesPremierePro CS6 was working fine until I updated an unrelated dll file for another (audio editing) program.
The file is a VST:Â Kontakt 5 8out.dll (Native Instruments).
Â
Although PremierePro is suppose to be able to use 3rd party VSTs they usually crash for me so I export the audio, edit it, then reimport it.
Â
How can I start PPro bypassing all plugins, then disable them?
I bought a full copy of Videostudio Pro X4 about a month ago after experimenting with the trial version for a good while, and it was all running smoothly until I was adding some rain effects to a rather large movie, and it said something along the lines of not enough space to load something, and then all the FX thumbnails disappeared. When i closed the program and tried to reopen it, it said "Error loading from stream" followed by a "Videostudio Pro has encountered an unspecific error and needs to close, please contact Corel Support and include a copy of the Dump file.". And now every time I try to load the program it gives me this error, and thats without loading the actual project that the file had the initial error on. All the files within the folder were captured via VS either as Video or as Stop-Motion so are under the default settings as I havent changed them or converted them atall.
I cant find anything on the knowledge base about this, and neither on these forums. I'm unsure how I send the Dump File, which I have found to Corel? I'm abit confused from the warranty support bit of the page where it says about having a one-off chance to contact them? So obviously I dont want to mess up my one chance so thought I'd check here what to do next!
A re-install of the program seems the logical next step but will I lose my project?
When I start up my GIMP in windows, it indexes the fonts every first time that I start after a reboot.I am using windows 7, is there anyway to tell gimp not to index the fonts ?
View 14 Replies View RelatedI use Illustrator CS4 a few years already. Last week I couldnt open my .ai anymore: at the startup I have an error:
Error loading plugins
appbarcontrolsplugin.aip
asset mgmt.aip
fxgfileformat.aip
navigator.aip
photoshopexport.aip
photoshopimport.aip
sangam2aimapper.aip
scriptingsupport.aip
scriptmenu.aip
services.aip
welcomescreen.aip
Â
I already installed all adope programmes again, after de-installing it.
AutoCAD 2014 isn't loading lisp routines when put in the start up suite.Â
They are loaded from a trusted location.
But Yesterday it was working fine, but today it's not loading any images. I have tried to restart my PC, but still nothing.
View 11 Replies View RelatedI am trying to build a web gallery so as I can build a collage from a Word file, which has 450 photos in it
So far I have:
Stored all images in a Word document
Saved them as a web page layout
Opened a Photoshop document
Gone to automate, web page gallery
Selected as source the folder with the images
Selected as destination another folder (same drive)
Hit OK and Photoshop tells me “None of the source files can be opened by Photoshop”
As I have done this procedure before (using the same images) and it worked I can’t understand why it won’t have it now?
question to do with images loading.
I have seen some websites load the whole image first - but at first it is fuzzy, then it gets more and more detailed.
Other websites (including mine) loads them line by line... so it scrolls down slowly.
Both websites use jpegs.
Is this a setting in apache, or is it to do with the jpeg format, or is it a thing that can be achieved with javascript, or even php?
Everytime i open my LR5, it keeps on posting a reminder that my Startup Desk is full already.
View 2 Replies View RelatedI've been using CS3. Without un-installing CS3, I installed CS6 actually both 64bit & 32bit. I had several problems when running. For example, images often were not completely visible after loading part of the image shown as transparent. I could duplicate the layer & all was ok, with both the new & original layers. This hasn't been a major problem, but is a nuisance & indicates that something is not right. Several features even cause "Photoshop CS6 has stopped working". I could always fall back to CS3 when a problem cropped up, altho' it was a pain having to save so often.
Â
I deactivated CS6 and uninstalled (via Control Panel). I then re-installed, installed updates & re-activated . same problem when images load. I just re-installed, so I haven't had a chance to test other things.Â
I create or load an image it is always darker than it is actually supposed to be. When I go to save a created image, it will always be lighter. What I want to know is how to make the image on the screen the same color as when I save it to my computer.
Example: I was following a tutorial to create a banner and when I finished (without saving) it turned out like this. Now, the image from the tutorial is actually suppose to look like this when finished. Then, after I saved the image it looked like how it was suppose to look.
problem with loading large numbers of images, not large images, but a lot of images in VS11. I am loading a lot of images to make my annual slide show for the HS band and I am running into a problem where the images start loading quickly (1 second each) and after about 150-200 images you start to load slower and slower as much as 70 seconds on image #300). I don't remember having this issue with VS9, which is what I used last year.
I tried loading the same thing in VS10 and it is much better on the load. There is a recognizable slow down, but nothing like VS11. Before you ask, I would be fine with doing the slide show in VS10, but running in Vista VS10 crashes on me too much to get it done.
I have been successfully using Lightroom 4 for several weeks (and the Beta version before that), but today, after downloading the Nik Software Viveza plug in, when I tried to open LR, none of my images were there, and when I clicked on a module, I received an error message saying there was an error trying to change modules. Not sure what to do. I've uninstalled Viveza, but that did not fix the problem. I've rebooted many time, that also didn't solve this issue. I also tried opening a backup from yesterday, but that doesn't work either. I use a MacBook Pro and am running Lion.
Â
I'm thinking I may want to uninstall LR 4 and reinstall..
If I have an image within in an XREF (lets say logo in a titleblock), when I open my drawing I get a image frame with the file path listed in its place. If I print, it only prints the frame and file path.
The way that this is fixed (temporarily) is If I reload the xref and image for each xref containing an image. Upon reopening the drawing, the same problem persists. I need to reload the xref/image every time I open the file if I want the logo to print on my drawing.
I'm going through older photos that were edited elsewhere and then added to my catalogue as DNGs while I was using Lightroom 4. Now as I go back, they are not loading correctly with my edits, but they were on Lightroom 4. Did something happen during the upgrade? Or is there a way to get them to register my edits?
View 10 Replies View RelatedI have added a few custom autocad commands that are specific to my scenario. I created Ribbon (and Menu for classic mode) for these commands and they are working fine. The only issue is that these Buttons (Ribbon and Menu for classic mode) are not loading the images(icons). All I get is a cloud image for both commands.
I have used 16X16 for small image and 32X32 for large image. Both are bmp files. These are attached to the custom  Autocad command that I am using. The commands themselves are working fine, except for the image which is not displayed. In short, what can be the possible reason for images not showing up?
I have a series of PNG images which have been authored from various sources, but mostly with Gimp. The images have transparent backgrounds and use partial transparency effects like drop shadow, etc. I want to display these on a bitmap layer of the TImage32 component from Graphics32.
I have dropped a TImage32 component onto my form, with the intention being to set the visibility to off, and use the TImage32 as a container for the PNG image I want to draw on the layer.
When I go to load the image at design-time, the dialog has two tabs - it allows me to load the RGB image, and the alpha channel, and I don't know how to produce these - I prouce the image by using the export to PNG function of Gimp. If I load the exported PNG into both the RGB channel and the alpha channel the resulting image doesn't have the transparent background. There obviously must be a procedure I need to follow to get Gimp to produce both the RGB and alpha channels.
my animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedI'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Â
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
Â
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
My photoshop 5.5 in XP hang at startup using my login. If I use the administrator to login, it can startup normally. My account is also in administrator group. I have tried removing the pref file and ini file but no use.
View 2 Replies View RelatedAfter Adobe Creative Cloud installed Photoshop CC via the root account, see:
Â
[URL]
Â
The Adobe Photoshop CC 14.1.1 (14.1.1.415) crashes immediately on startup under OS X 10.8.5 unless I am running logged into the root account. This happens when I try to run Adobe Creative Cloud.app as a standard user or as a user with admin privileges.
Â
In other words, the only way I am able to run the Adobe Photoshop CC application is if I take the dangerious option of enablign the root account, logging into it and then directly running the application.
Â
how I can run Adobe Photoshop CC without having to both enable and login to the root account.
I reformatted and reinstalled Windows 7 SP1 yesterday. Reinstalled CS5.5 Master Collection and updated through AAM. I can open Photoshop, but if I open a file, or try to create a new file, it crashes immediately, and this is the error info:
Â
Problem signature:
 Problem Event Name:   APPCRASH
 Application Name:   Photoshop.exe
 Application Version:   12.1.0.0
 Application Timestamp:   4d90cf71
 Fault Module Name:   nvoglv32.DLL
 Fault Module Version:   9.18.13.783
[code]....
Running Windows 7 64 bit, has been fine up until a few days ago after I had a virus. I have uninstalled, used the photoshop clean up tool and reinstalled, still the same problem. CS4 is working fine but I can't get CS5 to work, it crashes on start up with the following details.
Â
Problem Event Name:APPCRASH Application Name:Photoshop.exe Application Version:12.0.0.0 Application Timestamp:4bbc5b10 Fault Module Name:amtservices.dll Fault Module Version:3.0.0.64 Fault Module Timestamp:4b6004a6 Exception Code:c0000005 Exception Offset:0000000000088dba OS Version:6.1.7601.2.1.0.768.3 Locale ID:2057 Additional Information 1:42f3 Additional Information 2:42f36e6d42b7acab1a756482c3a16e17 Additional Information 3:a3a2 Additional Information 4:a3a2bc05e7527151873d6c51f844212f
I've just applied the latest update, but am experiencing very slow image loading times between LR 4.1 and CS6 Extended edition. I am using an iMac 27 2.8Ghz with 8Gig of System Ram, over 300Gig of HDD free space.
Â
Upon selecting edit-in CS6 with an image in LR 4.1, CS6 starts up with a long splash screen, loads, then I get a spinning grey circle, then CS6 loads on the desktop, then I get a colored spinning circle, before my image finally appears.
Â
I have performance set to an external scratch disk witih 624G of free space, 5644 MB of memory usage at 74%, HS at 30 CL at 7 CTS at 1028K
Â
I have CS5 still installed and it's load times are about twice as fast as CS 6
Know it's old, but have been using Photoshop CS 8.0 on office Mac Pro and home iMac for years with no problems. OSX is 10.5.8 Leopard. Still works fine on Mac Pro, but has just started crashing at startup on iMac for no apparent reason. Graphic layout comes up and then shuts down. Reinstalled the application with same result.
View 1 Replies View RelatedProcess:Â Â Â Â Â Â Â Â Adobe Photoshop CS5.1 [86573]
Path:Â Â Â Â Â Â Â Â Â Â Â /Applications/Adobe Photoshop CS5.1/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
Identifier:Â Â Â Â Â com.adobe.Photoshop
Version:Â Â Â Â Â Â Â Â 12.1 (12.1x20110328.r.145) (12.1)
Code Type:Â Â Â Â Â Â X86-64 (Native)
[code]...
When I launch PS CS6, I see the splash screen, and then the workspace, and then the program immediately crashes. I have verified that this is happening with all user accounts. OS is 10.7.5, PS version is 13.0.4. All of the other programs in the Production suite launch without a problem. Here is the crash report:
Â
Process:Â Â Â Â Adobe Photoshop CS6 [13488]Path:Â Â /Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/MacOS/Adobe Photoshop CS6Identifier:Â com.adobe.PhotoshopVersion:Â Â Â Â 13.0.4 (13.0.4.28)Code Type:Â Â X86-64 (Native)Parent Process:Â launchd [9427]
Â
Date/Time:Â Â 2013-04-05 12:36:11.076 -0500OS Version:Â Mac OS X 10.7.5 (11G63b)Report Version:Â 9
Â
Interval Since Last Report:Â Â Â Â Â 1258 secCrashes Since Last Report:Â Â Â Â Â Â 6Per-App Interval Since Last Report:Â 20 sec
Per-App Crashes Since Last Report:Â Â 6
Anonymous UUID:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0CBA49E8-64A2-4980-B2F3-9D8B43101BBEÂ
Crashed Thread:Â 0Â Dispatch queue: com.apple.main-thread
[code]....
This message keeps appearing when I start Photoshop CC on my MAC.  I don't see a Photoshop installer anywhere.One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing. Please run the Photoshop installer and re-install Photoshop.
View 8 Replies View RelatedI have just installed Photoshop CS6 trial and it crashes very often at startup (with windows error reporting message). I disabled plugins, GPU but no luck.What can i do next? (Ps CS5.1 worked fine)
View 11 Replies View Relatedmy adobe photoshop cs5 keeps on crashing at startup.It has been working fine until today after
View 4 Replies View Related