CS3 seems to start normally, and suddenly get this error:
Adobe Photoshop CS3: Photoshop.exe - Unable To Locate Component (title bar
of error dialog)
This application has failed to start because MFC71.DLL was not found.
Re-installing the application may fix this problem.
Windows did do an update. The 32 bit version runs fine and yesterday I had no issues with anything. I guess I am asking if the Windows update could have killed it. I have removed and reinstalled. I also pulled all my filters.
View 3 Replies View RelatedThis message keeps appearing when I start Photoshop CC on my MAC. I don't see a Photoshop installer anywhere.One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing. Please run the Photoshop installer and re-install Photoshop.
View 8 Replies View Relatedhave the CS3 suite, education version and i'm having problems whit photoshop. All the other programs work fine (flash, fireworks, premiere, etc), but photoshop crashes at startup.
I already disabled plugins, checked permissions, everything i can remember. The problems exists with domain and local (power and normal) users. Photoshop runs with local administrator but not with a domain admin, and i don't have any kind of policie restricting the domain admins.
The error is a "Runtime error" at the end of the loading, right after "Building menus".
Details of the error report:
AppName: photoshop.exe AppVer: 10.0.1.0 ModName: scriptingsupport.8li
ModVer: 10.0.0.0 Offset: 0015eebd
Recently I have been receieving the following error message when Photoshop CS6 x64 srtarts up on my Windows 7 machine. Ps resides on my SSD.
I don't always get the message but when I press X, Cancel, Try Again, or Continue the message repeats until finally Ps starts. I'm not sure what drive DeviceHarddisk3Dr3 is supposed to mean.
I get the following message almost, but not every, time that I start Photoshop.
b This application has failed to start because vfzcore.dll was not found. Re-installing the application may fix this problem.
I have tried reinstalling Photoshop. But this does not help. I often also get a windows error after photoshop is closed saying that it did not shut down properly.
I suspect that the vfzcore.dll error is due to some 3rd party plug-in. But does anyone have any ideas? These error do not appear to affect the performance of photoshop that I can tell. Everything that I use works fine and it never bombs off (except after closing the program out). But having to hit "OK" at the error dialog every time the program starts up is annoying.
I've recently updated CC from 12.1 to 12.2 and I cannot launch it anymore. After Effects launches its UI and after 2-3 seconds it crashes without any error message or crash log. My specs:
Windows 7 Home Premium 64bit
Intel Core i5 3450 3.1GHz
Geforce GTX 560
Gigabyte P67A-D3-B3 motherboard
16GB ram
I've already reinstalled After Effects about 4 times, deleted media cache, deleted preferences, updated graphics drivers, rebooted my PC dozens of times but I still can't run it.
It's done this twice before, but has been fine lately. I have a last-minute deadline job that just came in and I can't get AE to even start! Last time this happened, I just kept trying and after about 15 attempts, it launched...not doing that this time.
View 4 Replies View RelatedI bought a full copy of Videostudio Pro X4 about a month ago after experimenting with the trial version for a good while, and it was all running smoothly until I was adding some rain effects to a rather large movie, and it said something along the lines of not enough space to load something, and then all the FX thumbnails disappeared. When i closed the program and tried to reopen it, it said "Error loading from stream" followed by a "Videostudio Pro has encountered an unspecific error and needs to close, please contact Corel Support and include a copy of the Dump file.". And now every time I try to load the program it gives me this error, and thats without loading the actual project that the file had the initial error on. All the files within the folder were captured via VS either as Video or as Stop-Motion so are under the default settings as I havent changed them or converted them atall.
I cant find anything on the knowledge base about this, and neither on these forums. I'm unsure how I send the Dump File, which I have found to Corel? I'm abit confused from the warranty support bit of the page where it says about having a one-off chance to contact them? So obviously I dont want to mess up my one chance so thought I'd check here what to do next!
A re-install of the program seems the logical next step but will I lose my project?
Every since installing 2013 on my iMac system, I get a pop-up window everytime the computer boots up. Here's the message:
Insecure Startup Items folder detected. Items in the Startup Items folder (“/Library/StartupItems/”) have not been started because the folder does not have the proper security settings.
I use Illustrator CS4 a few years already. Last week I couldnt open my .ai anymore: at the startup I have an error:
Error loading plugins
appbarcontrolsplugin.aip
asset mgmt.aip
fxgfileformat.aip
navigator.aip
photoshopexport.aip
photoshopimport.aip
sangam2aimapper.aip
scriptingsupport.aip
scriptmenu.aip
services.aip
welcomescreen.aip
I already installed all adope programmes again, after de-installing it.
This is happening in both Map 3D 2011 and Civil 3D 2011 directly on startup and I can seem to get a straight answer as to what is causing this, or how to fix it. The automatic response was to download a fix for the language pack, but that didnt work. Standard AutoCAD 2011 works without any issues, same with ecotect.
Ive already uninstalled and re-installed both of the problem programs.
Im running Win 7 Pro 64-bit.
I have been getting fatal errors during my user account but not in my admin account. I logged in as admin and repaired Autocad Architecture 2010, using the system disk. I got back the report that Autocad was repaired. However, when I returned to my user account, I get an unhandled expection error when I start up Autocad.Architecture 2010. Do I need to uninstall Autocad Architecture 2010 and then reinstall or should I just pick the option to reinstall Autocad Architecture and then do I have to another registration code?
View 1 Replies View RelatedAfter I installed the stereo camera plugin (after SP3), every time I start Max, I get this script error:
-- Error occurred during fileIn in <ReadonlyTextFileStream:0x00005630>; line number: 2457
>> MAXScript Auto-load Script Error - C:Program FilesAutodesk3ds Max 2014scriptsstartupStereoCamModifier_V1_7_3.ms Exception:
-- Cannot assign to read-only variable: StereoCamera <<
Other than the error though, things generally seem to work fine with the plugin itself. What could be causing this?
I have a Win7 X64 PC running C3D 2103. I recelty installed this for the first time and am seeing the following error message when I launch the application.
I've tried to do a repair and still get the message.
I've been running ADT 2005 successfully on windows XP Pro for a year, but suddenly after running the backup program in windows XP, I effectively cannot startup and run AutoCAD for all the "Resource Manager Errors".
Checking the Autodesk knowledge base, the problem is recognized, but the solution does not appear to be available to me. Here is what Autodesk has to say:
Startup error: Cannot load resource only dll
Published date: 2004-10-21
ID: TS100289
Applies to:
Autodesk Architectural Desktop 2005
Issue
When you attempt to launch a session of Autodesk Architectural Desktop 2005, the following error message is displayed:
Cannot load resource only dll
Solution: This error message typically occurs on systems running a backup software, such as Backup Software Verita 9.1. This software runs a remote agent that causes a conflict with the loading of ARX and DLL files associated with Autodesk Architectural Desktop 2005. In these instances, disabling the remote agent will restore the ability to launch and utilize Autodesk Architectural Desktop 2005.
*[back to me] - I've searched for the aformentioned "remote agent" on my system, but to no avail. Meanwhile, I cannot run ADT as it asks for missing files at startup and at every command.
New purchase of X5 Home & Student.
PC - Dual core with 2Gb RAM 300Gb disc space running MS XP Sp3 (ALL Latest updates installed), latest NVidia drivers installed. I have looked at all previous inputs on this problem and carried out installation with Anti-Virus disabled, FIREWALL disabled, disconnected from network etc etc.
On attempting to start any of the package applications the software fails with an A.R.M. error.
Getting an error at startup relating to the dimension style dialog..."C:Program FilesAutodeskAutoCAD 2013acdim.arx cannot find a procedure that it needs.
file date is 8/29/2012
Are there any solutions out there other than a complete re-install? maybe an install repair?
I'm running AutoCad LT 2012, this message appears right after the startup loading page and its always different with the exception of 3544 at the end of every code. I've tried a repair and a reinstall but this keeps popping up.
View 1 Replies View Relatedi opened up Photoshop CS4 and i get this message Photoshop.exe - Application errorThe exception unknown software exception (0xc06d007e) occured in the application at location 0x7c812afb.
View 3 Replies View RelatedI'm running Photoshop Elements 5.0. Everything was working fine til this mornin. I've had the program for about a year now. When I tried to open it this morning I got this error message that popped up.
It says:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
I've tried repairing the program. That didn't work. Restarted my computer. That didn't work. Uninstalled the program and tried opening it again. That didn't work. I'm at a loss! I really need to get into my program b/c my work is there. I tried opening some of my files (they are located in my Pictures folder) and they pop up with the same message.
Nothing changed from the previous conversion.
Photo>Edit in >smart object in PS.
PhotoPRo space
left is psd from LR, right is NEF adjusted in LR
Mac OSX.8.2
I have two copies of a regular Photoshop CS6, both activated. They have worked fine for a long time. But suddenly the copy on my laptop has a different start up splash screen and is now asking me to login for a trial license for Photoshop CS6 extended. It also has a 3D-menu it never had.
What happened? I did not install anything? Did something go wrong on the last update? But more important, how do I get back to my activated Photoshop CS6 non extended?
Photoshop CS 6 crashed twice this evening. Enclosed is the crash report:
Log Name: Application
Source: Application Error
Date: 10/26/2012 6:36:58 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Hudechrome-PC
Description:
Faulting application name: Photoshop.exe, version: 13.0.1.0, time stamp: 0x5022da9d
Faulting module name: Photoshop.exe, version: 13.0.1.0, time stamp: 0x5022da9d
Exception code: 0xc0000005
Fault offset: 0x00000000013d0903
[code]....
Photoshop has been acting a bit strange. When I open it, I get about a 2 to3 second white screen before Photoshop finally loads. That's new.
The only changes I have made was to install a new 2T drive, copy over information from two smaller drives and remove them. These are strictly storage drives and have nothing to do with C drive or scratch.
I also have had an unscheduled reset to defaults occur recently.Finally PS persists in unchecking Open CL.
When trying to save a graphic I've composed as a jpg or other file type, I'm suddenly getting the following prompt:
"Could not save...because that document is currently open. Save using a different name, or close the document and try again".
Nothing seems to work, and this machine/software have never had problems in the past.
I purchased and installed the Adobe design premium CS3.
Photoshop usually close sudently without saving files.
All of a sudden I cannot save a .psd file as a .jpg. What am I missing?
View 1 Replies View RelatedI got Photoshop CS4 yesterday. It was working okay for the 10minutes i got to use it yesterday, but it's being odd today.
Here's a list of problems:
- When i try to open pictures, it suddenly shuts itself. No error, nothing. It just closes.
- If I'm working on something for a while, it suddenly shuts itself off, again, no error. This is the most annoying one of the lot.
-Some things don't work, like my 3D options, I always get an error when attempting to use them.
My photoshop 5.5 in XP hang at startup using my login. If I use the administrator to login, it can startup normally. My account is also in administrator group. I have tried removing the pref file and ini file but no use.
View 2 Replies View RelatedAll of a sudden my text is incredibly small. The resolution is set at 300. The "Resample image" box is unticked. I've tried resetting the character...still the text is smaller than it should be. For example, 8 point Times New Roman can barely be seen with the naked eye. I haven't done anything different. What gives?
View 15 Replies View RelatedI make and use brushes all the time. I don't know what happened, but yesterday, my brushes are suddenly all really tiny. The preview looks normal, (you know when you hover your mouse you see the preview size) but then when I actually click the mouse, the result is super tiny - I couldn't even see them at first. And no, I'm not using a super-sized document - just same size I always use. Seems to be with all my brushes.
View 2 Replies View Related