I make and use brushes all the time. I don't know what happened, but yesterday, my brushes are suddenly all really tiny. The preview looks normal, (you know when you hover your mouse you see the preview size) but then when I actually click the mouse, the result is super tiny - I couldn't even see them at first. And no, I'm not using a super-sized document - just same size I always use. Seems to be with all my brushes.
View 2 RepliesAnd I can't use the pattern stamp tool either. Some switch threw itself and I can't paint or type any more. I created a new blank doc and nothing worked there either. There are no selected areas to be inside of or outside of. Every time I click, the history adds another line, but there isn't anything done.
This kind of thing drives me nuts. *If* there is a reason for invoking the brush and having it not work, there should be an error message like the one for trying to clone stamp without selecting a source.
My brushes suddenly won't work at 100% opacity. The opacity will change if I change the slider but never actually reaches 100%. For instance if I'm using red one click will get me pink like I'm at 20% opacity, it will get darker as I increase the opacity slider but never quite reaches 100%. At 100% it is still a shade of pink.I have to click like 10 times to get it red. Everything else works fine, pencil,eraser, etc. I have checked all my settings and can't figure it out.
View 1 Replies View RelatedIf I close out and restart my text still wont show up.
View 2 Replies View RelatedThey are fine when I open them. but then when I drag them into my main document they are tiny! The size of a dot. I only got Photobucket today.
View 2 Replies View RelatedI am interested in grouping and sorting brushes according to size, shape, whatever.
Right now when I add a brush library, they just stack on top of one another.
For example let's say I have a round brush with a 10 diameter, then next to it a round brush with a 20 diameter. If I make a 15, it goes to the bottom of the list, and I have to scroll all around. How can I group them?
I suspect I would have to make my own brush library with my brushes how I want them, then save that and load it?
When I drag an image into Photoshop, it is TINY. It doesn't matter the resolution of the image. It could be the biggest image in the universe and it shows up so small to where I have to use Free Transform every single time. Even the eraser is so small that I can't see it. It can be on 2500 but the eraser is a dot.Â
Â
Is my Photoshop on a certain setting that I can change? This is my first time using the software on my new Macbook.
I recently got a new Retina MacBook Pro, and upgraded to CS6. But all my files are opening teeny tiny, at .05%. How can I get them to open at a reasonable size, like 16.7%? These are large comic art files, so I don't need them to open at full size.
View 6 Replies View Relatedit did not do this at first and I can still drag items directly onto my canvas as smart objects but when I drag photos from LR into my PS thumbnail at the bottom, they appear so tiny, I can't even make them out. Clicking crtl/0 does not enlarge them, I have to press ctrl/+ several times to make them larger.
View 26 Replies View RelatedI have the same problem that I have seen others having.When I click inside the image, it gives me a tiny square instead of a vertical bar.I tried to and did resize the image to 1024 by 772 and 72 ppi.
View 24 Replies View RelatedThere are a couple of tiny grey squares on the upper left corner of my files. One has a "01" and the other one a symbol which I don´t know what it is.
View 5 Replies View RelatedHow to using many tiny different pics to create one pic. Something like this: (excuse the quality, the pic is really a composition of many tiny pics of his face).
View 1 Replies View RelatedI just got CS6 and went to use the lens flare. The window is so small, I can't see where the flare is being placed. Is there any way to enlarge the image in the tiny window?
View 10 Replies View RelatedHow can I brighten Jupiter in a night shot without changing anything else in the photo??
View 2 Replies View RelatedAt some point, several months ago, my sister and I were playing with transform (by phone, we are in different states) -- she had taken a Photoshop class and wanted to try to duplicate something.
Â
I tried using my type tool yesterday, and couldn't see anything when I typed. (White background, black text, Arial, 14 pt, 100%). I've tried clearing type presets. I finally tried blowing it up to 500% and saw a small, gray font-like image where I was typing.
I held down Ctrl and played with the transform box: if I expanded the box, my text is there. I've tried clicking on everything at the top when in transform. How to get my type tool entering text in the regular way.
when I open my image, it is covered with tiny coloured dots. how do I turn off this view? i've used photoshop for years and never encountered this. i looked at the histogram for some means of turning it off, but no luck.
View 14 Replies View RelatedWhen opening existing tiff files in Photoshop 6 they are opening very tiny in top left corner(memory can be anything from 1 mb up to 1 gb. I have to magnify each one seperately right up to see them. Never had this problem in CS 4, tried everything in preferences, view etc etc
View 3 Replies View Relatedhow to create the tiny horizontal flash of light effect which censors the nipples in the attached image..
i.m looking to make the same effect in some other images, also now that i notice, there is some overall effect on the image..
Just come back from a lengthy trip with about 900 photos from 3 different cameras. Did most of the jpeg's in LR 5, but waited with the Canon raw files for PS CC. All appeared to go well, with first adjusting them in PS CC camera raw, then opening some on PS CC. Saved most in PSD format. However, some of the less important ones, such as information photos, were saved as jpegs, from within PS CC.
Â
This is where the trouble started. Once finished, I went through them all in Bridge, using full screen preview. The ones saved as jpeg, appeared tiny, instead of full screen. Trying to open them, resulted in an error message, with something about a marker not being there. Before panicking, changed the extension from jpeg to psd - and the filed opened in PS CC without any problems. Saved the files as jpeg, using a different name and this time they were all ok.
Â
So it would appear that there is a problem saving a file with layers as a jpeg, without first saving it as psd
This has happened to me a few times. Randomly, when I'm selecting a brush size, the brush cursor will change to a tiny diameter, looks like it's the size of a one pixel brush. Only the cursor is inaccurate though, when I start to paint the actual brush size is fine.
I usually just restart photoshop, but the document I'm working on right now still isn't working right.
how can I resize the font on my organizer. The print is tiny
View 1 Replies View Relatedsuddenly the menu at the left side and the print at the top is really tiny! i tried changing the win7 resolution - then it was too big. it was fine last week!
View 3 Replies View RelatedHow can I avoid importing tiny pictures from html file folders? Elements 11 organizer
View 2 Replies View RelatedI don't know why this happened, but for the past few days my camera icon (and target helper-box) has been really, really small.
View 2 Replies View RelatedTook a photo over skype. It was very tiny, I suppose because the person I did Skype with was using and Iphone. I would like to enlarge it but it gets fuzzy and pixelates.
View 1 Replies View RelatedJust a question about scaling and pixelation. I've been doing some 3D models in ZBrush at a 960x960 size, and wanting to scale them down to 48x48 size, very small icons for a game engine.
Anyway I started doing this with just normal scale in GIMP, but the picture just turned out like a big blur. With further investigation I found GIMP add-ons, Liquid Scale and Step Scale (I think that was it's name) where you can step down the scale of the picture and sharpen it during step downs etc.
Still not having much luck, I can get it to look better, but not good, still very pixelated and blurry. The required result I want is something along these lines - Picture
Using high res picture, I've tried PNG, GIF, PSD with not really much luck.
PS: Attached is the original model GIF and the resized picture.
Took photo over skype. Other computer involved was a mobile phone. Photo very tiny. When try to enlarge, it blurs and pixilates. Any suggestions as to how to enlarge and have a decent photo. I am using Gimp 2.6.Attached File
(s)Â MVP.png (39.15K)
Number of downloads: 7
Whenever I print to PDF I seem to get a tiny scaling error. If I print directly from Autocad the drawing is scaled perfectly. When I print exactly the same drawing as a pdf the scale is slightly out.
I think it could be the paper size I am selecting- I dont really understand the difference between the ISO full bleed- expand ect..
I sometimes get full size previews in the import window (when I double click on a picture in the grid), but usually they are tiny and get extremely pixelated when I try to make them bigger. This makes it very difficult to decide if a picture is good enough to import.
View 1 Replies View RelatedHow do you rearrange the brushes in the brushes box?
I've seen they are arranged by name, so how do you rename the brushes since renaming the file name don't rename the brush.
I have created an object and unioned it with another object of what i assumed was the same length.
These nasty lines appeared and as i zoomed in an unwanted face appeared.
I have tried solid edit and delete face but it says gap cannot be filled. There is another unwanted face i am assuming on the other side but the gap is so small my computer always freezes and slows down before i can get in that close to examine it.