when I open my image, it is covered with tiny coloured dots. how do I turn off this view? i've used photoshop for years and never encountered this. i looked at the histogram for some means of turning it off, but no luck.
View 14 Replieswhen I take my photos into the 'Develop' area, they become covered with red dots like bacteria.
View 4 Replies View RelatedI have a problem with plotting my layout. When I plot, the lines from the xref are small tiny points/dots instead of a continous line. All other lines are OK. What could be the problem?
View 7 Replies View RelatedWhen opening existing tiff files in Photoshop 6 they are opening very tiny in top left corner(memory can be anything from 1 mb up to 1 gb. I have to magnify each one seperately right up to see them. Never had this problem in CS 4, tried everything in preferences, view etc etc
View 3 Replies View RelatedWhen I drag an image into Photoshop, it is TINY. It doesn't matter the resolution of the image. It could be the biggest image in the universe and it shows up so small to where I have to use Free Transform every single time. Even the eraser is so small that I can't see it. It can be on 2500 but the eraser is a dot.
Is my Photoshop on a certain setting that I can change? This is my first time using the software on my new Macbook.
I just got CS6 and went to use the lens flare. The window is so small, I can't see where the flare is being placed. Is there any way to enlarge the image in the tiny window?
View 10 Replies View Relatedwhat Im looking and seen it around other places is like an outer glow but instead of a glow its dots where the dots closest to the object are large and close together and as they move out they get smaller and further apart...
View 8 Replies View RelatedI want to make this effect on a photo. Its abit difficult to explain, but I'll try:
The image only contains one color, say black or red, and is put together by dots in different sizes and with different space between them, not sure, might just me different space between them. In the dark areas they are close to each other and in lighter areas they have a greater distance between each other.
I also wonder how to make the same kinda dot effect, but not with only one color. like magazies and newspaper use when they print photos. Im not reffering to the halftone filters. I tried to define a dot pattern, and delete the inverted pattern in the image, but im not satisfied with the results...
We need a macro that will allow you to select a certain color fill inside document and change all to no fill hairlines. It needs to be capable of doing it several times within the same document. Does anything like this exist out there?
We have color replacer. We want it to do this automactically with a static group of colors everytime without any manual maniplulation required.
Can anyone tell me if it's possible to make a completely transparent and colored image?
I'm intending to use it for a webpage and placing links and other stuff on a table, in which i want to have a colored and transparent background, so i can view the page background.
I had edited an image in a layer. It is a full color image. When I dragged & droped it into a totally different photo, suddenly it appeared in greyscale. The original image in its original layer is still full color. This has never happened to me before.
View 1 Replies View RelatedI have taken a series of pictures in a light box with the aim of using them in a school recipe book we are making and selling for charity. I'd like to try and remove the background of one image in particular. The image is of a plain cupcake in a white liner taken on a white background. My aim is to use the image on either a white page of a pastel tinted page with the recipe listed at the side.
View 2 Replies View Relatedhow do I make sure the files i export from lightroom to hard drive are the same large files i imported to lightroom from my camera? I have worked on a collection for many hours and following export to hard drive the file sizes are tiny??
View 3 Replies View Relatedi want to make a image which made of only dots no line only dots. how i make that kind of image..
View 5 Replies View RelatedI am trying to create image 1000x10px.
Width of col is 130px and second 870px.
They are both colored differently.
I need it to set it as an background of my web site.
I have a light-colored image that I want to make a transparent background of without having any of the jagged white edges and whatnot, to make a signature and avatar and so on. I've tried the magic wand, Alpha Mask, and Alpha Space, none of which have succeeded. As I said, the image itself is very light (the attached image), so it's difficult to achieve what I'm trying to do.
Attached Thumbnails
How can i get such effects like in the attached image;
- first of all; the image has no background - the grapes are shown on a plain white background.Note; there is another nice little thing that we have to mention; the image of the grapes are somewhat with a kind of a overdose of light - i think that this is a nice effect - perhaps added with gimp!? The grapes look very interesting.
- the next effect that i like is the adding of the circles that are seen in the image. How did they add those pastel colored circles.
see this image here
[URL]......
I dunno whether there is a filter in the Photoshop that could do this covered-eye-revealing process in one click. Anyway do we have to create the eye?
View 3 Replies View RelatedI have a jpeg with a white background and solid colored clipart image. I need to remove the colored part of the jpeg image with magic wand in illustrator cs6 and make it a vector image. The magic wand doesn't seem to do anything in illustrator. I did it in Photoshop and saved it as a PNG with trnsprnt background opened it up in illustrator and it was all jagged. It is such a simple image, only two colors, blue on white.
View 1 Replies View RelatedShould I have installed 32 bit photoshop CS5? Recently upgraded my old (32 bit) mac pro to OS 10.7.5 Lion. Then upgraded Lightroom from version 2 to version 3. And finally upgraded from Photoshop CS 3 to CS 5. Why do droplets of Photoshop actions have a NO symbol over them, and are unable to work as a preset in Lightroom?
View 2 Replies View RelatedAny ideas how ot fix this? Every time I try to enter text, the edges of the text is surrounded/selected with lines going around it....how do I stop that and have it stop turning my image red (Its supose to be brown, until I click it then it turns red), it isnt even using the correct colors that I set it at.
View 2 Replies View RelatedI'm using Adobe Photoshop 9.0 cs2 and I need help with a large color replacement project. I'm an amature video game designer making a level for the classic P.C. game Doom 2 and I'm creating a new weapon and monster for the level I'm creating. For the monster I plan to alter the colors of the frames of the original monster and change the dimensions of key features.
use an indexed color mode that were extracted into individual .png files.
Today I made the big mistake of changing the frames over to RGB mode so I can use the color replacement tools available in that mode. I should have done one frame first then convert it back to indexed color mode because the frames look terrible when converted back from RGB mode. What it is doing is using all the colors of the RGB color spectrum to replace various colors. Unfortunately what this means is that its using colors that are not in the color palette I loaded in the original pic and when I convert it back it looks terrible. There are enough colors in the doom color palette to produce the look I'm after but the automated conversion process from RGB to indexed colors does not pic the best matches in most cases. By doing this I am taking an image consisting of about 150 different shades of color down to about 75 different shades of color. I cant find any color replacement tools for indexed colored images and its going to take me forever to do all frames pixel by pixel so I need one of two things to be able to accomplish what I need. Either a better way of converting these images back, or some tool I can actually use in indexed color mode. If there is a way to select a pixel and change all other pixels of that exact color to a new color then I can just do it pixel by pixel that way. I need something here or I'm going to lose hours of work. If there is a way to load my color table into RGB mode to limit what colors it uses that might work too.
I would just leave the pics in RGB mode if the game im editing for could use that format but unfortunatly anything I convert to RGB will have to be converted back to 256 colors for it to work in the game.
I really need to achieve this effect of half face covered with a mud mask like in the picture attached below
and it has to be a very realistic effect. But no matter how much i tried i don't manage to get it right .
This will be laughably simple for most readers, but I'm stuck and am at a loss.
I have a portion of my building in max that needs to be covered in metal panels. I'm good with creating a material to represent this. What I cannot find in ANY of materials is how to adjust the material's placement on each face so that I can make sure they align.
Currently the seams "jump" as they turn the corners, rather than wrapping continuously around. Way back when I took classes in this prog at one point we were able to select a specific FACE of a cube and then shift the material around to align the seams correctly (ie: without creating a UVW unwrap).
The "help" system in max acts as if this isn't even possible. Is my only option really to have to unwrap the textures, use photoshop to paint panels, and then reapply? Seriously?
I have a box with text in it. I wish to have hatching in the box, but not have it interfere with the text. Can I make the text an object or a boundary where it will be recognized as an island and not be hatched over?
The attached file (NP-1a.dwg) has text in a box with hatching. I don't want the hatching over the lettering.
I'm using AutoCAD-LT either 2006 or 2009.
while importing photos in Lightroom 4 they all are covered with a green layer even on the histogram. Could that have something to do with my configurations? Working with windows 7 prof.
View 1 Replies View RelatedWindows Explorer set to open image files with PSE11, but when I double click on image in WE it launches PSE11, but I then need to click on Open tab in PSE11 to get it into work window. PSE10 did not have this problem
View 1 Replies View RelatedUsing Lightroom 3.6 RC I have a problem when printing to a file. All of the jpgs created are covered with a vivid red coloured mask/tint.
View 7 Replies View RelatedIf I close out and restart my text still wont show up.
View 2 Replies View RelatedThey are fine when I open them. but then when I drag them into my main document they are tiny! The size of a dot. I only got Photobucket today.
View 2 Replies View RelatedMy CS6 open on blank screen only, cant open with image (at les it is hiding behind something on known to me ). Image open OK in Bridge Raw. I did reload CS6, from my CD, but same thing.
View 1 Replies View Related