Whenever I print to PDF I seem to get a tiny scaling error. If I print directly from Autocad the drawing is scaled perfectly. When I print exactly the same drawing as a pdf the scale is slightly out.
I think it could be the paper size I am selecting- I dont really understand the difference between the ISO full bleed- expand ect..
Just a question about scaling and pixelation. I've been doing some 3D models in ZBrush at a 960x960 size, and wanting to scale them down to 48x48 size, very small icons for a game engine.
Anyway I started doing this with just normal scale in GIMP, but the picture just turned out like a big blur. With further investigation I found GIMP add-ons, Liquid Scale and Step Scale (I think that was it's name) where you can step down the scale of the picture and sharpen it during step downs etc.
Still not having much luck, I can get it to look better, but not good, still very pixelated and blurry. The required result I want is something along these lines - Picture
Using high res picture, I've tried PNG, GIF, PSD with not really much luck.
PS: Attached is the original model GIF and the resized picture.
Trying to scale a viewport in AutoCAD 2010, and ran into this error "Error: AutoCAD variable setting rejected: "cvport" 3". I've scaled viewports all the time, and this is the first time I've ran into this issue.Â
View 1 Replies View RelatedWhen plotting profile plan sheets, there is an error in the scaling of the grids. Â I can not seem to figure out why the plotter is not plotting correctly. Â I did try creating a pdf of the plan sheet and plotting, but still have the same scale error. Â It starts to get off scale after about 500 feet, so the error in scale is small, but still there. Â It is off by about 2 or 3 feet at 500 feet on the profile grid.
View 2 Replies View RelatedDue to a "FATAL ERROR: Unhandled c0000417h" my AutoCAD 2014 crashes every time I try to print a dwg to pdf.
It seems to only occur if I print one of any number of files within a particular/specific folder.
Things I am still able to do:
I can publish the very same drawings to pdf.
I can print a dwg to pdf if it is within a different folder.
Whenever I try to do a print with a Visual Style of "REALISTIC" I get the following message, the numbers may change but it's always has the same outcome the program crashes and I have to restart the program.
So far, through trial and error it only appears to happen when using "REALISITIC" the other styles do not crash the program, at least not yet.
[Side note: may not of tried everyone yet.]Â Â
 Error: "FATAL ERROR: Unhandled Access Violation Reading 0x000a Exception at 2653281h"
Running AutoCad 2012, with CadPipe 12.5. Printing is being sent to network printers and plotters, doesn't matter which one I send to, it will crash everytime.
Strange issue when printing a drawing. For some reason whenever I send this drawing to print the 'squared' symbols get replaced with either some overlapping numbers or the letter E.
Unfortunately I can't take a photo of the result but I'll provide an image of what I'm trying to print.
Plotting as a .pdf works fine (print preview also looks fine) and is the current work-around but it would be good to get a proper solution because it's likely these will be printed again from AC in the future and we'll forget and the client will get a stodgy drawing and I'll be sad.
squared.jpg
When I try printing to an adobe pdf file I obtain the following error:-
%%[ ProductName: Distiller ]%%
%%[ Error: limitcheck; OffendingCommand: string ]%%
Stack:
67143
/mystring
24
120
22381
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
New Responsive Scaling feature is great.
Â
It's enabled me to add an Edge Animate file to my responsive Wordpress site using the Edge Suite Plugin.
Â
Only problem for me is that although the 3.7MB file I’ve created scales perfectly on all devices it struggles to play on smartphones. (I assume it's too big and too power hungry to play smoothly on smartphones - even since I've added a pre-loader.)
Â
So, in an ideal world, what I need is a separate low res Edge Animate file that only plays on smartphones.
Â
Failing that, I’d be happy with a 'Down-level Stage' image which could replace the Edge Animate animation.
Â
For a moment I thought I’d found a solution when I came across this Adobe TV movie: [URL]
Â
Unfortunately this clever solution only works when the new Responsive Scaling feature is NOT selected. As soon as it is selected, the animation no longer changes from one layout size to another when the browser window is reduced.
Â
I don’t mind whether the fix is in Edge Animate, Wordpress or the Edge Suite Plugin - I just want a solution!
Using 2010 Civil3D and trying to use "Reports" to print a point list and I am getting error:
Export LandXML is currently is currently not supporting the following drawing units:
Millimeters, Centimeters, Decimeters, Inches.
I have used the unit command to make sure I am in feet. Niot sure what else to look at.
I'm trying to print Photoshop file that is 740000 pixels wide on roll paper on an Epson 4800. The file is a large Photoshop file format. It was created in CS4. When I try to make the print command, I get an error message saying Photoshop cannot print files wider than 32000 pixels. (Which seems unlikely to me)
I can not seem to get a simple yes or no answer to whether what I'm trying to do is possible. Upgrade to CS5 suggested, but I get exactly the same error message on CS5. I don't want to drop the resolution to solve this.
I have created an object and unioned it with another object of what i assumed was the same length.
These nasty lines appeared and as i zoomed in an unwanted face appeared.
I have tried solid edit and delete face but it says gap cannot be filled. There is another unwanted face i am assuming on the other side but the gap is so small my computer always freezes and slows down before i can get in that close to examine it.
I have a drawing that is 50 scale. However my sections are all 10 scale. When I set my viewport to 10 scale, all my text is tiny. I can go into the style of the section view and change the size, but then it's too large in model space. Nothing I've tried will change the size of my text in paperspace.
Win 7 64BIT
C3D 2013
Dimensions appear tiny compared to drawing ,how do I change this?
View 2 Replies View RelatedWhen I want to print something out from Photoshop CS5 on my printer I get this error.
Â
PCL XL Error
Subsystem: KERNEL
Error: IllegalOperatorSequence
File name: derived_scr/1x55.ndbg.kernel.c
Line number: 1820
Â
My windows system is Windows xp professional with service pack 3. If I print out from other program I don´t get any errors.
Â
This is a new printer and before I got this I had a HP Color Laserjet CP5225 and there were no problems printing out from Adobe Photoshop CS5.
As you can see in the attached images their are tiny black holes that appear on the plotted pdf that are not there in paper space. I use the 3d clip command for my viewports to split up the tower into sections. The only thing I can think of is that for some odd reason when plotted the plot routine picks up these bolt holes that are suppose to be clipped out. how to prevent this?
View 2 Replies View RelatedLR printed okay for about 1/2 of a job (~300 prints) I have and then this showed up. To finish I have had to "edit in CS5" now for a few days, thusly one image at a time and no info printed on the print either. After 2 days of printing good in CS5 it too began the dreaded "communication error".This did not happen until 2 weeks back. I spent days proving that the printer is "communicating" just fine. New cables, other programs etc. The printer driver has been reloaded dozens of times. The machine has been rebooted daily.Â
Â
I do not think it has any relevance however,
EVGA 655 MOBO
i7 860 Intel
16 G ram Corsair
EVGA GTX275 video
Open GL is enabled in Preferences in CS5
Win7Ultimate
Â
Printer is Epson R1800. Epson drivers installed.
 LR is 3.6 w/ all updates
 LR4 beta is on the machine but not what I try printing from.
After printing a photograph cannot print another. Error message: "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." have to close and reopen the program to print one more.
I have this program on my laptop as well where it does not have this problem. Have tried reinstalling but problem remains on my desktop.
I am getting an error while printing : one or more fountain fills may show banding. What is this and how can I correct it?
View 4 Replies View RelatedWhen I add text and dimensions to my drawing it appears tiny on screen.What is the correct setting for text size for A4 and A3 drawings,And how do I set this?
View 1 Replies View RelatedI have a problem with plotting my layout. When I plot, the lines from the xref are small tiny points/dots instead of a continous line. All other lines are OK. What could be the problem?
View 7 Replies View RelatedWhen I print a single 4x5 image on an 8.5 x 11 sheet of paper, the entire sheet, less the eighth inch margins, receives an almost invisible layer of color. Where is the dialog box generating the instruction to print this background and how do I disable it? Both Elements 3 and 6 used on the same printer, an Epson 2200, would simply print the image.
View 3 Replies View RelatedIf I close out and restart my text still wont show up.
View 2 Replies View RelatedThey are fine when I open them. but then when I drag them into my main document they are tiny! The size of a dot. I only got Photobucket today.
View 2 Replies View RelatedI don't know why this happened, but for the past few days my camera icon (and target helper-box) has been really, really small.
View 2 Replies View RelatedI make and use brushes all the time. I don't know what happened, but yesterday, my brushes are suddenly all really tiny. The preview looks normal, (you know when you hover your mouse you see the preview size) but then when I actually click the mouse, the result is super tiny - I couldn't even see them at first. And no, I'm not using a super-sized document - just same size I always use. Seems to be with all my brushes.
View 2 Replies View RelatedWhen I drag an image into Photoshop, it is TINY. It doesn't matter the resolution of the image. It could be the biggest image in the universe and it shows up so small to where I have to use Free Transform every single time. Even the eraser is so small that I can't see it. It can be on 2500 but the eraser is a dot.Â
Â
Is my Photoshop on a certain setting that I can change? This is my first time using the software on my new Macbook.
I recently got a new Retina MacBook Pro, and upgraded to CS6. But all my files are opening teeny tiny, at .05%. How can I get them to open at a reasonable size, like 16.7%? These are large comic art files, so I don't need them to open at full size.
View 6 Replies View Relatedit did not do this at first and I can still drag items directly onto my canvas as smart objects but when I drag photos from LR into my PS thumbnail at the bottom, they appear so tiny, I can't even make them out. Clicking crtl/0 does not enlarge them, I have to press ctrl/+ several times to make them larger.
View 26 Replies View RelatedI have the same problem that I have seen others having.When I click inside the image, it gives me a tiny square instead of a vertical bar.I tried to and did resize the image to 1024 by 772 and 72 ppi.
View 24 Replies View RelatedThere are a couple of tiny grey squares on the upper left corner of my files. One has a "01" and the other one a symbol which I don´t know what it is.
View 5 Replies View Related