i was working on an animation and that was a great animation I worked on that 2 months and i was working on that and when i wanted to save the scene the monitor gone black and i restart my pc.and when i opened the maya and tried to open the scene it said error reading file.
View 2 RepliesI have a student license for Autodesk Maya 2012 (I'll need it for school), but whenever I try and start up the setup, I get this weird message:
error 1321. The installer has insufficient privileges to modify the file C:Program FilesAutodeskMaya2012PYTHON_LICENSE
Then the following message:
Fatal error during installation. #229: failed to run AdskExecuteSequence
Then "Failed to initialize Autodesk Maya 2012"
And then it the installation exits itself out.
I have a 32bit Windows computer.
For the past three day I've been modeling a character for an animation im making, but now when ever i try to open the file in Maya, Maya stalls at reading file 99% and stops working.
View 1 Replies View RelatedI am not being able to open a .cdr file in Draw. Its about 1.16 gb, I know its big but I didnt realise it has become so big, it has 18 pages now. It was working fine till yesterday. but now when i am trying to open it a pop up comes showing error reading file. I am using x4 in a 32 bit windows 7 with 4 gb ram.I have tried opening in laptop with 64bit windows 7 4 gb ram, it opened till 80% adn then a different error came which said - invalid object. I need to retrieve the artwork, i have worked on it for more than 3 weeks. The back up file also shows the same.
View 7 Replies View RelatedSome users are getting the following error when running Script Pro:
Error while reading log file for <drawing path>
I had my Mac crash on me a few days ago and since then I've been only able to work on my current project for ten minutes at a time before I get the above dialogue come up.
It's not just this file that suffers from this and there doesn't appear to be a pattern to which file is affected. The files that are mentioned in the dialogue are outputs from both FCP and from AE itself, they are always Quicktimes and they are compressed with the Animation codec, although I've used a number of other codecs and it doesn't seem to make any difference. If I quit and restart AE, I can continue working for a while on a composition with the same file that caused the dialogue to appear, until it happens again, often with a different file mentioned in the dialogue.
We have re-installed the CC suite after an uninstall and clean-up, but to no avail.
Do we need to reinstall the OS? Could it be a quicktime thing?
I'm attempting to get Smoke 2012 SP1 running on Mac OS X 10.7.2. After installation, I cannot get the application to launch -- instead I get a "DlVideo Error: No video list" error and then exit.
Hardware specs are attached, in short 2 x 6 core Mac Pro, 24GB RAM, Quadro FX 4800 and Kona 3G. This is built on a clean install of 10.7.2 using the Apple video driver for the 4800. The display is an Eizo ColorEdge CG303W, attached to the 4800.
I would like to install the 4.1.28 CUDA drivers to enable the Mercury playback engine (as this machine will probably also run Premiere Pro), however I'm trying to keep it as simple as possible until I can get Smoke running.
A Euphonix MC Transport and MC Color will be added to the station, however they are not currently attached.
My workstation name is bc118-s001. I'm using an external license server (macnv3), which is running properly.
Storage is currently set to the local disk, which I know is sub-optimal. Ultimately the storage volume will be a fiber-attached TerraBlock 24D, however I'm upgrading that device from 4.6.4 to 5 before I put the unit into production, and would rather not store any data on it before the upgrade.
I've attached the application and shell logs for your reference. The following lines are only the errors from the app.log:
bc118-s001:~ itservices$ less ~/Desktop/smoke201211_bc118-s001_app.log | grep -i error
2074786144 project.C:4713 02/04/12:11:36:35.936 PRJMGT : Load Project, failed to switch to group users
2074786144 video.C:1068 02/04/12:11:36:41.379 VIDEO: non-standard monitor refresh rate (0.000000). Audio/Video playback may not be in sync.
2074786144 EuTop.C:65 02/04/12:11:36:41.467 Control Surfaces : Initialisation failed (error 46)
2074786144 error.C:332 02/04/12:11:36:42.950 ERROR: DlVideo Error: No video list
2074786144 error.C:110 02/04/12:11:36:42.950 DlVideo Error: No video list
2074786144 messageAccumulator.C:268 02/04/12:11:36:42.959 Error: DlVideo Error: No video list (Press ESC)
I notice that the monitor refresh rate is not being detected properly, however the OS seems to detect it properly.
These lines are the errors from the shell.log:
bc118-s001:~ itservices$ less ~/Desktop/smoke201211_bc118-s001_shell.log | grep -i error
Feb 04 11:36:42 : ERROR: DlVideo Error: No video list
Feb 04 11:36:42 : DlVideo Error: No video list
I'm using Coreldraw X3,operating system, Windows XP Professional version 2002, 1GB of RAM,free space of 4.56GB on C drive, 34.8GB on backup drive,display adapter Radeon X300,HP compaq dc7600 convertibleI'm having a lot of difficulties opening a series of files. I had been working on a laptop for a few months and upon returning to the office I tansfered the files to my desktop to complete thr final revisions. I worked on my desktop for 3wks without no problems and then one day I went to open the files and recieved this message on all of them:"Error reading a bitmap in file"I have since tried numerous methods with no success.
View 13 Replies View RelatedWorking in LR 3.6, Mac OS10.6.8, 8GB RAM, accessing from an external USB 2TB harddrive, and when opening an image I get the error:
"Lightroom encountered an error when reading a catalogue file and needs to quit.
"Lightroom will attempt to diagnose the problem the next time it launches."
I've run "Optimize Catalogue" and that didn't relieve the problem. Also have deleted preference files and still no joy. I also have upgrade to LR4 in hopes that it will fix the problem and it didn't. So I've removed LR4 for the time being until I can figure this out in LR3.
Here is a screen shot:
When I try and render my 23 minute project to WMV HD 720p it gets to 6% and says file reading error.
View 11 Replies View RelatedI was working on setup up several camera animations in a file. I saved the file, and put the settings in for all 4 cameras to render. I started Batch Render running, it saved, began rendering the first frame and then Maya crashed. It was able to save a .mb version as it was closing. I have since been unable to get either file to open correctly.
If I try to directly open the files, they load 100%, the status bar immediately switches to "Writing <username>.20110503.<time>.ma" and the Crash Reporter appears before the viewport can even update and show the model.
If I try importing either file into a new document, it will load completely, and a dialog window pops up with: Could not save file"/var/folders/FL/FLo7J2o4H4OV9SDiREDU4U+++TI/-Tmp-/thompirson.20110503.1216.ma".
If you click OK, Maya crashes without the Crash Reporter opening.
I've just install DC. Seems to work fine, plugin is loaded and i can import .step files with no problem. Also can tessalate as i wish.
My problem is no uvs are kept from original file previously made in solidworks.
When my nurb is selected and i go to uv texture editor is completely blank.
Why my uvs are not kept?
can 2012 open a flame 2013 file archive
View 2 Replies View Related have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.
I'm getting the following error:
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
Using AutoCAD 2012 SP2 on WinXP.
On a file server, when a folder permission has been set to "deny delete" we cannot navigate to that folder in the open file dialog box.
After archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)
I am working on a scene in Maya 2011 as a Maya binary and can open the scene up in Maya 2012 as a binary without any problems. But, when I save the file in Maya 2012, I can no longer open it in Maya 2011.
I've read in the forums that I can save it as a Maya ASCII file and have better luck transferring between Maya versions but I cannot get Maya 2011 or 2012 to save the scene as a Maya ASCII file.
I get the following error: // Error: File contains unknown nodes or data. To preserve this information, the current file type cannot be changed.
I've tried "Ignore Version" on when opening and have deleted all all by type/non-deformer history but no luck.
I'm attempting to export out an animation clip and got the above error. A similar post years back and said it was a plugin issue. But nor sure which plugin I might have turned off.
By the way, Steps performed prior to"
Selected mesh and rig (contains IKFK nodes)> Generated character set "walk", ect Then while still selected, Edit>Keys> Baked Simulation Then from the graph editor and the character selected, File> Export Animation Clip....that's when I get the error.
I think I covered the steps correctly. Maybe I'm missing something?
You more experiance animators/riggers might be able to shed some light on this modeler.
OK then update. I select never show this message agian ever (my favorite ) - but guess what a it pops back up. Nothing is wrong with the assembly
View 1 Replies View RelatedWe are using Inventor 2012 and would like to read Solidworks 2012 files directly into the system. This can be done with Solidworks 2011 files but our vendor upgraded his software between the time he sent us test files to try the import and now. Can you tell me if the is a plug in or something that will allow us to read SW 2012 files or should we upgrade to Inventor 2013?
View 6 Replies View RelatedI am currently experiencing this error when basically putting an Inventor 2012 file (part or assembly) on a flash drive and then loading the file(s) onto a different computer with Inventor 2011 installed. Once in Inventor 2011 and trying to open the necessary file(s) I receive this error. Is there some difference between the 2011 and 2012 files that is causing this to happen? Or the face that I am using the student version of both?
View 5 Replies View RelatedMy computer went down two weeks ago, bad enough that I had to get a new hard drive and start over. When I went to install Inventor, I kept getting Errors 1335, 1334, then error 1406 during installation. I seemed to have gotten beyond those, but when I went to open certain assemblies I started getting "Error in reading RSe Stream (4 not equal 2)" and "Error in reading meta types in RSe Segment AmDcSegment in..." and them it shows a certain file it doesn't like, sometimes repeating for multiple files. I clicked on the communication icon in the lower right of my Inventor screen and it said a maintenance update was available. I installed SP1 and tried again. Same problem. I clicked on the icon again, and it told me SP2 was available. I installed it and tried again. Same problem. I clicked on the icon again, and it told me SP3 was available. I installed it and tried again. Same problem. I clicked on the icon again, and it told me SP4 was available. I installed it and tried again. Now I can't open Inventor at all. Inventor crashes just on trying to open up. I've been running Inventor 11 since it came out with no issues whatesoever. Now I'm two weeks behind with no end in sight.
View 9 Replies View Relatedi was trying to move some files via LR.I've researched and found that everyone else was able to fix their issue by moving the preview database out of LR, tried that but it doesn't fix the problem.I've moved all files except the new preview and catalog (only a single catalog) database from the Picture/ Lightroom folder.I've rebooted the computer several times and tried opening LR, still no joy.The size of my catalog is 3.8GBThe size of the preview is 6.5GB (77,186 files in 45,745 folders).This is a new install from scratch on a new PC,
Specs are:
Intel i7 4770
32GB memory
2 x 250GB SSD drive in RAID 1 for OS and apps
1 x 6TB SATA HDD for images in a RAID 5
1 x 5.3TB SATA HDD for final images in a RAID 5
I've had nothing but issues with this system since day 1, images transferred and they do not show up correcting inthe individual folders (especially 2012). Total image count is about 320,000
Seems to me that LR cannot handle the numbers although LR3.6 was a lot stable this version is shakey all over the place.
I've browsed a few previous forum questions and answers and it appears I might need to find my catalog and delete my preview cache file(s). However, I cannot find where these files are stored. A few of the forum responses said to go into Lightroom edit/preferences to find where these files are stored, but I cannot get into Lightroom. When I open it, it gives me the error message and I can't seem to get into edit to find where these files are stored.
Also, I'm relatively new to Lightroom (been using it for a little over a month, mostly just editing and not much for cataloging and organizing my photos)
When I try to open LR4 I get the message that LR has encountered an error reading the preview cache. I can't find the preview.irdata files to delete or clear.
View 2 Replies View RelatedI use an external hard drive for my photographs. Recently I've been getting "Lightroom encountered an error when reading from its preview cache and needs to shut down" message. It says LR will attempt to fix this problem the next time it launches, but once I click ok, the program closes and when I restart it the same message comes up.I use LR4 and am working on a Macbook.
View 4 Replies View RelatedSometimes when opening CS2, it hangs when it reaches the " Reading Text Global Resources " This is an intermittent,
View 3 Replies View RelatedI draw, or even add text to an object this always pops-up:
Disk Error- 108 occurred while reading or writing to a scratch disk. this error is unrecoverable.
What can I do about this? This has NEVER hapenned before.
I'm on a Compaq Presario PC, OS: Windows XP Home Edition.
I am using Photoshop CS2.
I have just got this error message 'Error in reading RSe stream (4 not equal 0)' after checking out my assembly, and it appears the cause is a small hss part in Frame Generated frame.
The part appears in my tree in the frame assembly and it not showing up in my model, I can't delete it to brake the link.
LR locked up and I had to force close. Now everytime I try to open I get and error message 'LR encountered-an error when reading from it's preview cache and needs to quit'
View 1 Replies View Related