Suddenly today my open dialogue box has reverted to an old-fashioned looking small thing about 7" x 4 1/2" which only shows 7 files at a time. Always before I got a nice big Windows Explorer style box nearly filing the screen. I'm running Windows 7 and Inventor 2011. Is there a switch somewhere to revert to the 'old' type box and that's got switched somehow?
Inventor Pro 2012.I am opening some SolidWorks 2011 SLDPRT files to make them into Inventor part files.The models come in fine. When I try to produce a IDW I can Dimension all the geometry but can not call out and holes/threads. I am using Win 7 64 bit, all the latest service packs for Inventor and Windows.
I have include a snipe screen of the Open file dialogue box and the selected options.
is it possible to Zoom and Pan whilst I have a title box open.I work for a company that has installed its own toolbar and and attribute box's to be filled out. My issue is that I need to zoom into various parts of the drawing to be able to fill out all the boxes.
Currently I have to close the dialogue box down every time I want to move the drawing to a specific area.If there was a command or setting that I could use to be able to keep the box open and move the drawing at the same time.
if i try and to open a new file or save as a current file, the windows box does not open. the command line does populate asking for file name, etc, but obviously is very tedious to navigate windows folders with a command line!
any obvious changes that would prevent windows folder dialogue box not to open?
I thought standard Windows behavior is that when I re-size a dialogue box that next time the box is activated, it remembers the size it was when I last used it.
When ever I open a drawing from the file menu or open file icon, the preview pane is missing from the dialogue box. I is there if i use file new or when I insert a block of file. Please see attached screen print.
I recently started having a problem with the 'Merge to HDR Pro' process in photoshop CS5.
Recently, however, I have been unable to generate 32 bit images from the 'Merge to HDR Pro' process.
When I begin the process and select my files, the dialogue box I should see pop open to select 32 bit, 16 bit, etc. output options, does not open. Photoshop launches directly into the merge process, aligns the source photos, transforms, etc., and finally outputs a 16 bit image, which is opened in photoshop as if I had opened it from a source folder.
At no point in the process is the histogram of the new HDR photo displayed. I am unable to find any HDR preference pages where I could possibly change settings.
Running X4 under Win7 and it always goes back to the last file I was working on when I go to the Open dialogue. It insists on going to the Libraries Directory on my C: drive and 99% of my files are stored on my H: drive. Sometimes it's easy to get out of, other times I can't back up at all. Is there someway to gte the Open dialogue to simply go to My Computer instead?
I have purchased a large monitor and would like to reduce the size of the text in the dialogue boxes, i.e. Project Browser, etc. Can this be done?, and if so how. The same goes for the Panel button.
Upgraded to 2.8 with total deletion of the Gimp folder to try to address this.
File / Open Recent works fine.
File / New etc same all good...
File / Open has a problem.
Once that window opens the product is hung.
There is no window to type the file name in, and I cannot click on any of the disk drive names.
I must admit that I have a good number of network and usb as well as physical drives. I do not think that any have changed names, but it seems clear that something like a path change is responsible?
I am creating an image of 150mm x 100mm at 300dpi but photoshop keeps adding decimal points like 150.02 when i change the image from the original size, is it something I am doing wrong or a known bug? You would expect that when you change an image to 150 x 100mm it would stay at that size and not be added to.
"Image > Print Size" really IS the command you are looking for.
The key is to pay attention to the units-of-measure shown on the Print Size dialogue box:- The "Width" and "Height" values under Print Size are displayed in real-world units (inches, mm, etc.), not image pixels.- The "Resolution" values are displayed in pixels-per-unit.- You cannot change your image's pixel dimensions (aka scale the image) from the Print Size dialogue. That's what the "Scale Image" command is for.Remember the relation between pixel and print sizes is:(print size) = (pixel size) / (print resolution)
When you change the image's print resolution, of course the real-world size (the "width" or "height" shown in the Print Size dialog) of your image will update to reflect the new print resolution -- that value is calculated from your image's actual pixel size and whatever resolution value you just entered. This is totally normal behavior -- in fact, it's expected. If you change an image's resolution from, say, 150 pixels/inch to 75 pixels/inch, this doubles the print size of your image but only the print size; the image's pixel size remains precisely the same as before. (You can confirm this by comparing "Image > Canvas Size..." before and after changing the resolution.)
And as others have stated, if you're using the image for Web viewing then its print resolution has absolutely zero effect on how it will appear onscreen (print resolution only affects, well, actual printing), in which case you'll want to use the "Scale Image" command to actually scale your image larger or smaller.
Size of page differs in page size dialogue box to that listed in print options box. I changed computers and it works correctly in the second one in that the page size is the same in both boxes, but I still cannot get it to work in the original pc. Both the file and the printer are common. Reinstalling Xara does not work. It looks like it is not installing correctly, even though it appears to be.
Everything has been working fine but I have recently installed two new extension panels - Fundy Image Brander and Tych Panel. When either of these scripts require you to input a file to open via the Open File dialogue box, everything hangs for 2-3 minutes. The mouse and keyboard do not lock and you can open up other windows which work fine. The open file dialogue just hangs (not just on selecting an individual image but selecting a drive or folder). If you call up the Task Manager and End Photoshop as a task a dialogue box pops up with the message "The system cannot end this program because it is waiting for a response from you."
Photoshop otherwise works well. It's just when the extension panel requires you to input a file to open.
1. I prepared a 57 mm square, proportionally resized it to 58 mm and applied enter for the change but it remained as is i.e. 57 mm sq. Next I made the same changes through property bar, it worked. Through further experiments I observed it only make transformations through enter if we give x=val and move to y=val through tab and press enter. Or if we directly give new value to y and press enter. The property bar doesn't has this problem.
2. Transformations dockers problem of showing wrong position on y-axis. Screen shot attached.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key. This problem remains as is from v16.0.0.707.
4. Printing - EPS with CMYK / Native colour management shows graying problem on RIP. Facing it as a major problem.
Problems encountered even after resetting through pressing F8 at startup.
I have two PC's side-by-side, running the same version of CS6. On one PC, I can see my Libraries from the "save as" and "open" dialogue boxes and on the other I have can't have have to dig down to find the folders I want to save to. I don't have any plug-ins installed, and I have not edited the registry.
Is it possible to create a new TAB in the standard iProperties dialogue box for Inventor Models and Drawings? I want a completely new TAB to hold unique company information fields without having to create Custom Property fields.
We're trying to automoate the creation of DWF's from an IDW whilst having the defer update application option set to True.
During the open stage, we get the defer updates dialogue prompt. Can we automate click the OK button during the open process? or Can the the defer update dialogue be turned off during the open?
In Inventor 2011 and previous, one could detect assembly constraint errors by taking a component that was not fully constrained and manipulating it via a mouse click and drag. This would launch a dialogue box listing all the constraints that are having problems and still allow you to accept the manual part manipulation.
However, I am now using Inventor 2013 and when I have constraint errors, I cannot manually manipulate non-fully constrained objects and do not get that overall constraint error dialogue box. Is there a setting to turn this back on?
Whenever I go to do a "Save As" or an "Open" (not from Vault), over on the left it has a gray area that says "Workspace", "Libraries" and under "Libraries" says "Content Center Files".
How do I edit this to add some standard network locations where we often save things? I often "Save Copy As" to save DXFs into another folder, completely separate from the project file, so sheet metal can get to the flat patterns to burn them out. It would be nice to have a shortcut to this location.
I’m suing the Mould Design feature of Inventor Professional and need to have four cavities for this mould. When I try to use the pattern function nothing happens. I look at the Wiki help and it says that I have to enter values for X direction X distance etc, but this dialogue box does not appear.
The company I work for has used autodesk models and set up their own frame generated parts. Basically took the models and every generated model will have their custom properties specific to our company. These custom parts appear when I change to the correct project and will not show on default. Frame generator has been working fine up until the past 2 days.
When I try and edit the a frame generated piece (deleting a trim with frame generator, editing a part with frame generator) the dialogue box shows and the blue bar is running across the box but it stays in this state until I exit the program. I have even let it load for about 30 minutes before after leaving it to go out for lunch.
This has only recently started happening and I am not sure what is wrong. Frame generator does work like normal sometimes. I don't have any programs that are using excessive amounts of memory in the background.
What I would like to do is create a custom dialogue for each of 3 or 4 standard sketch symbols we use on a regular basis. I'd like to load 'suggsted' values out of an excel spreadsheet and allow the user to pick from them or enter in a custom text string if required. The values would then become part of the sketch symbol.
I've spent some time looking into iLogic rules and I think I've determined that they're not flexible enough to do what I want.
If I'm correct, it is possible (or a good idea) to do this using a VBA macro? I'm a little hesitant to go down the full blown add-in route. While I'm pretty confident I could work it out.
I have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box. I'm sure I've done this before and this hasn't happened?
In an .idw environment, I have multiple models displayed.I am trying to create simple text labels for each model using text, modifying each one so that it will display the part number and the revision level by using the "Component" drop down box and assigning the proper "Type" and "Property", then using the "Add Text Parameter" button to place the fields into the text box.
This works as intended for the first model that I created a view for. However, it will not work for each successive model; the text will revert to the part number and revision level of the first model that was brought into the .idw environment, even if I change the target component in the "Component" drop-down box.
In the .jpg that I have attached, you can see that I have 035-14218 selected in the "Component" drop-down. This is the initial model that I brought into the .idw. and the resulting text is correct.