how to edit the view label in the "Styles" dialogue, so I can get the text spacing to where I want it?
I had to change fonts, and it screwed up the spacing. It is "single", but that's like 2x what it formerly was.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
Autodesk 2013 Inventor Professional.
1. When in style and Standard editor with default standard selected under Standard I am trying to display mass properties in my view label.Select View Preferences tab. View type Base. Next to Display select Edit View Label.When Format Text box pops up in the selection for text type I have two options.
a. Properties - Model
b. View Label Properties
2. Inside an IDW file right click on view and select edit view.When Drawing View box pops up there is the option to access Edit View Label next to View Identifier.When Format Text box pops up in the selection for text type at this point there are seven options.
a. Properties - Model
b. Properties - Drawing
c. Drawing Properties
d. Sheet Properties
e. Physical Properties - Model
f. View Label Properties
g. Sheet Metal Properties
Questions 1. Why are ther only two options in S&S Editor?
2. Can I add more options to S&S Editor?
I would like to add mass to my lablel inside certain templates and have it show when I display a views Base view label. Not ot have to maunually add it each time it is displayed.
Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies View RelatedWhat I would like to do is create a custom dialogue for each of 3 or 4 standard sketch symbols we use on a regular basis. I'd like to load 'suggsted' values out of an excel spreadsheet and allow the user to pick from them or enter in a custom text string if required. The values would then become part of the sketch symbol.
I've spent some time looking into iLogic rules and I think I've determined that they're not flexible enough to do what I want.
If I'm correct, it is possible (or a good idea) to do this using a VBA macro? I'm a little hesitant to go down the full blown add-in route. While I'm pretty confident I could work it out.
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedEvery time i made dwg's i have to create all ort. views but i also need place label for each view. Is it possible with rule to pick view and then choose from list which view label it is. For ex. plan,side lt, side rt isometric etc..
View 2 Replies View RelatedQuestion regarding view labels in drawings.
I want to change the appearance of the view label to look like attached snap shot. Is this possible? I have looked through the inventor settings but cant find any options.
As a possible solution I can always create intelligent symbols which update with the drawing (like the standard view labels) but before I begin creating these I wanted to check if there was any other way?
I found some code to add labels such as "Top View" "Left" view etc. to view labels, but it's not quite what I'm looking for. I'm OK with the default "View 1" and "Scale 1/4" that comes up on the multiview but I want the view label to say something like "Flat Pattern" and "Scale 1/4" when I do a flat pattern and same for ISO. How to accomplish that with iLogic?
View 1 Replies View RelatedI'm noticing that on some of my drawings that the view labels are not aligning correctly to the respective views. I have view labels set by the drawing styles to appear at the bottom center of the view by default.
The problem occurs when I go to move the view to a different area on the drawing. The view label ends up on an obscure part for the drawing. When I realign them manually, save, close and reload the drawing, the view labels still appear on obscure parts of the drawing and need to be realigned again. Only some views are doing this and I'm not sure what is causing this. It happens with (but not limited to) base, detail and section views.
FYI, I'm using Inventor Pro 2012 SP1 build 190 64-bit. I'm working from Inventor DWG (not IDW) files.
I have often problem with drawing view labels. When model is changed and I switch to the drawing then the label is moved to an random position. There is possible to little move with view, or edit label text or switch off/on label and label move back to correct position. This is very unpleasant when there s more views in drawing, is necessary to correct each label.
This happen in Inv2013 and also in Inv2014.
Is not there an possibity to minimize this?
Enclosed is example video.
I have successfully been able to rotate the drawing view. rotating the view label.
View 1 Replies View RelatedWe put several parts on a single drawing sheet and ,to include the part number in the drawing view label, we must edit each view label and change the type to Properties_Model and the Property to Part Number. Is there a way to set the default of a drawing view label to include the Part Number? I tried modifying the styles to include <PART NUMBER> but it the text "<PART NUMBER>" came in instead of the value. To get the value, I had to edit the view label and hit the X with a down arrow to get the part number to show up, which is not much different than having to edit the label and change type and property. I'm looking to avoid all the view label editing as much as possible.
View 9 Replies View RelatedI'd like to customize the way our section marker terminators look. More like an architactual style drawing.
I'd also like to add the sheet number that the section is cut from to the section view label.
As far as I can tell, this propertie is not available for insertion in the view lable. Is there a way to make it available?
The need for these changes come from larger drawing sets were the section is cut on one sheet and shown on another. We'd like to link the sheet numbers in both the section marker terminator and view label.
I am trying to rewrite Curtis Waguespack's ilogic code to modify drawing view labels from this post http: [URL]...
The completed label should appear like this
<Description> - Mk <Part Number>
Est Unit Mass = X kg
(Scale 1:1)
At this point I have 2 problems
1. I want to add the physical mass to the second line and would prefer to use the calculated physcial property rather than the a custom iproperty. If editing the view label, it would the property access under physcial properties.
2. I want to rewrite the code so it is selective or per view - in otherwords, I only want it to modify a single view I select once the code is run. At this point I know I need to remove the For loop but I dont have a clue as to how to make it selective.
'start of ilogic codeDim oDoc As DrawingDocument: oDoc = ThisDoc.DocumentoModel = ThisDoc.ModelDocumentDim oSheets As SheetsDim oSheet As SheetDim oViews As DrawingViewsDim oView As DrawingViewoSheets = oDoc.SheetsFor Each oSheet In oSheetsoViews = oSheet.DrawingViews For Each oView In oViews oView.ShowLabel = True
[Code] ......
what i am trying to do is create an iLogic rule that if your drawing view scale is set to the following ...
1:1, 1:2, 1:4, 1:8, 1:12, 1:!6, 1:24, 1:32, 1:48, etc. on the view label for that view it will diplay ...
SCALE: 1/2" = 1'-0"
and so on for the rest for the standard scale factors.
i know it will be some sort of a loop and it needs to check all views when ran for any changes.
i have never done any coding for the drawing side of inventor yet only model coding
Is it possible to change the text height of a drawing view label through VBA?
I have tried to change it by creating a new text style manually with the text height I require and then through VBA set the view label to use that style.
The View label takes on the new style but does not change the text height.
I have tried to use 'StyleOverride FontSize=' but I have text that is multi lined and using this command converts all my text onto one line.
Is it possible to change the text height of a drawing view label through VBA?
Below is my code so far,
Sub HoleDetailSheetLabels()
' Declare the Application object
Dim oApp As Inventor.Application
' Obtain the Inventor Application object.
' This assumes Inventor is already running.
'Set oApp = GetObject(, "Inventor.Application")
[code]...
I am trying to get the correct total mass of a particular assy variant in a view label. I am trying to avoid using I-Assemblies due to the length of time it takes to set up and inevitable fudging of parts lists with phantom parts when things go awry. Anyway, to get around that clumbsiness, I use a combination of suppresed parts, assembly Level of detail (LOD) and View representations to switch parts on and off for various assembly variants of a theme (which works fine for me). see my "Mass of LOD's.jpg" attachment which should fully explain the parts list filtering and what I WISH to achieve. My objective is to get the correct MASS per Level of Assy and View Rep (both called the same) to be automated, correctly (as per LOD/VIEW REP), ideally, in the view label or in a leader note. I reckon I was able to do this way back in MDT? Any enhancement in Inventor 2013?
Inventor 2012
Vista Ultimate 64bit
Is there a way that we can set the view label in the style library to show custom/user Properties?
We have set our iam/ipt templates to have some custom properties which we wish to display in the view label when the view is created however there this no way to add these properties to the label.
I find this a little strange as you can add these user Properties to the parts list in the style library? (I've added some screen caps to show what I am talking about)
Is there a way to bring up the original dialogue box to edit an existing table? (TABLE brings the "Insert Table" dialogue box that lets you set number of rows and columns, it's this menu that I would like to bring up to revise existing table settings).
It seems hard to edit a table once it exists.
The reason I'm looking to do this is because I have an excel table linked (which I scaled to be larger) but every time I update the table to include new information it brings the new text in at the original text size (very small). I figure I could solve this by going back to the original table settings and setting an area on the sheet to update rather than selecting "Entire sheet"...
In a drawing, How is one able to edit a view after it has been created? For instance the parent view orientation is locked, the child views are locked with respect to everything except the identifier.
View 4 Replies View RelatedI am specifically working with the Section Major Offset lable. The City of Dallas wants the lable to call out the Offset distance and direction over the elevation (example "30.0' LT."). Since zero has not offset direction the label reads "0.0' T." at the center point. Is there a way to include an if/then statement in the label style to remove the hard coded text?
View 8 Replies View RelatedIs there anyway of getting assigned Pay Items int a label style? I tried adding a text component but there is never an option for payitems.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I am trying to create label styles that match our company standards. Unfortunately the program defaults are lame.
View 9 Replies View RelatedFor some reason, the label styles is not available for all corridor. i have multiple corridor and want to label the grade (%) of a an element. See attached picture.How do i activate to label features on different corridor
View 1 Replies View RelatedI have been creating copies of various line label styles. In my toolspace where I have them listed and I can view the styles in the tree, some of the new ones I have created are a sub-base below the ones I used to copy them from (there is a plus sign next to them and the new style is below the plus sign), and others that I copied do not have a plus sign next to them. How I even did this, but I would like them all consistent, because these are part of my base template drawings.....
View 4 Replies View RelatedIn my idw, when I right-click on my section view line (or the section view itself), I want to change the section depth from full to some distance. Problem is there is not a "Edit Section Properties" in the context menu.
There are other section views on this sheet and they will display "Edit Section Properties" in the context menu.
Any clues as to why I dont get a context menu on just this one section view? I could delete the view and redimension everything, but I had rather not.... Its got several dims on it.
Cant post the file either... its pretty large.?The idw itself is 16mb, not counting all the parts/assemblies.
I have a line label style that consists of two blocks (crowsfeet). The blocks are taking on the properties of the current layer when xrefed. I have enclosed a couple of drawings to show this behavior.
Open the "crowsfeet sheet" drawing. You will notice the crowsfeet are green.
Change the current layer and regen. The crowsfeet will change to the color of the current layer.
To take this one step further:
Freeze the current layer in the current viewport. The crowsfeet disappear.
Change the current layer. The crowsfeet reappear with the color of the current layer.
The objects in the blocks are on layer 0 with a color of bylayer. Changing the color to byblock produced the same results.
The only workaround I found was to change the color of the objects in the block to something other than bylayer or byblock.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
Let's say you created some Label Styles, and want those Label Styles to be available in another existing drawing.
Do you have to insert the drawing (which has the desired Styles) into the existing dwg? I tried DesignCenter, but it does not seem to have the ability to import Label Styles or Point Label Styles.
C3d 2010 (no SP)
Win7
I set my des. key up like this: However this produces one single line of text with the description "span 0 dia. 0.0 Ht. 0" I want them on 3 separate lines, like the above picture.So I set up a label style With this component...So how I get the parameters $1 $2 $3 to go in the correct label component?
View 9 Replies View RelatedC3D 2012 on 64bit Win7 Dell everything up to date
Is it possible to create a tool pallete with label styles, like station & offset label styles? I have a million of them - alignment, profile, surface, etc., labels.
I know you can put them in a template. I searched the group but did not see anything.
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
I cannot erase certain point styles/label styles in Civil 3D. Why is this, and is there a way I can?
View 2 Replies View Related