AutoCAD Civil 3D :: Can Copy Label Styles
Jun 3, 2013
I have been creating copies of various line label styles. In my toolspace where I have them listed and I can view the styles in the tree, some of the new ones I have created are a sub-base below the ones I used to copy them from (there is a plus sign next to them and the new style is below the plus sign), and others that I copied do not have a plus sign next to them. How I even did this, but I would like them all consistent, because these are part of my base template drawings.....
View 4 Replies
ADVERTISEMENT
Jan 2, 2014
I am specifically working with the Section Major Offset lable. The City of Dallas wants the lable to call out the Offset distance and direction over the elevation (example "30.0' LT."). Since zero has not offset direction the label reads "0.0' T." at the center point. Is there a way to include an if/then statement in the label style to remove the hard coded text?
View 8 Replies
View Related
Oct 1, 2012
Is there anyway of getting assigned Pay Items int a label style? I tried adding a text component but there is never an option for payitems.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 2 Replies
View Related
Jul 6, 2012
I am trying to create label styles that match our company standards. Unfortunately the program defaults are lame.
View 9 Replies
View Related
Sep 24, 2013
For some reason, the label styles is not available for all corridor. i have multiple corridor and want to label the grade (%) of a an element. See attached picture.How do i activate to label features on different corridor
View 1 Replies
View Related
Feb 15, 2012
I have a line label style that consists of two blocks (crowsfeet). The blocks are taking on the properties of the current layer when xrefed. I have enclosed a couple of drawings to show this behavior.
Open the "crowsfeet sheet" drawing. You will notice the crowsfeet are green.
Change the current layer and regen. The crowsfeet will change to the color of the current layer.
To take this one step further:
Freeze the current layer in the current viewport. The crowsfeet disappear.
Change the current layer. The crowsfeet reappear with the color of the current layer.
The objects in the blocks are on layer 0 with a color of bylayer. Changing the color to byblock produced the same results.
The only workaround I found was to change the color of the objects in the block to something other than bylayer or byblock.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
View 6 Replies
View Related
Apr 5, 2011
Let's say you created some Label Styles, and want those Label Styles to be available in another existing drawing.
Do you have to insert the drawing (which has the desired Styles) into the existing dwg? I tried DesignCenter, but it does not seem to have the ability to import Label Styles or Point Label Styles.
C3d 2010 (no SP)
Win7
View 7 Replies
View Related
Jan 5, 2014
I set my des. key up like this: However this produces one single line of text with the description "span 0 dia. 0.0 Ht. 0" I want them on 3 separate lines, like the above picture.So I set up a label style With this component...So how I get the parameters $1 $2 $3 to go in the correct label component?
View 9 Replies
View Related
Mar 13, 2012
C3D 2012 on 64bit Win7 Dell everything up to date
Is it possible to create a tool pallete with label styles, like station & offset label styles? I have a million of them - alignment, profile, surface, etc., labels.
I know you can put them in a template. I searched the group but did not see anything.
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
View 4 Replies
View Related
Sep 11, 2013
I cannot erase certain point styles/label styles in Civil 3D. Why is this, and is there a way I can?
View 2 Replies
View Related
Oct 9, 2012
I wish i could plot label styles (pipe network labels, point labels, etc.) that contain background mask with the line merge setting ON. Mleaders with background mask plot fine with line merge on, but any intelligent object style containing a background mask will not 'mask' when plotting with line merge on.
View 3 Replies
View Related
Aug 18, 2013
Is it possible to have point label styles (or any other label styles) that only show up or print at specified scales?
If you have several view ports at different scales but showing the same area you may want to show more detail in one than another. Can annotative text be used in this way.
I know this can be controlled by having different label styles assiged to different layers and using layer manager to control what is visable, but I would like a more automatic way of doing it. Or having layers only visible or print at specified scales?
Civil3D 2014 - Windows7 64bit
View 6 Replies
View Related
Jul 23, 2013
Can i add sheet set fields to label styles
View 2 Replies
View Related
Apr 20, 2013
I am trying to set-up point and point label styles to show trees on a survey plan. The point styles is set with a block, and a label is a regular label style that shows a point number and elevation. The problem comes when the label is positioned outside of the block that represents the point. What I need is sort of fixed offset from the center of the point.
View 9 Replies
View Related
Jun 18, 2013
How to export the cross sectional / profile label data in civil 3d. in excel or notepad or html.
View 1 Replies
View Related
Oct 16, 2013
I'm currently doing some testing of 2014 SP1 and noticed the Copy Styles routine when creating Plan Production Sheets doesn't seem to function as it did in 2012?
Using 2014 SP1, I data referenced a Pipe Network into a Plan Prod. sheet that was created before the Pipe networks were created. After data referencing the first Pipe Network into the plan sheet, I tried to label my pipes and structures, noticed none of our custom styles got copied (during create sheets command) into the sheet?
In 2012 they did.We have a lot of these Plan Production dwt's here and it's going to be a major PITA if all Plan Production.dwt's will need to have all Styles within them.
The nice thing about the way it used to work is the styles only needed to be maintained in a couple base.dwt's.
In addition to these Pipe & Structure label styles missing the list goes on throughout the Settings tab. Only present styles seem to be of "in use" nature such as pfl style, Alignment style, pfl view style etc. where the sheet creation process pulled specific information into the sheet dwg from source dwg.
Also did a quick test of our 2012 configuration and majority of , if not all, styles from source dwt do get copied over eliminating the need for them within the Plan Production dwt's. 2012 SP3 used here.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 4 Replies
View Related
Jun 26, 2009
am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
View 9 Replies
View Related
Aug 21, 2012
How do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style). Right now the default is a "finished contour" label style for all surfaces.
View 4 Replies
View Related
Jul 9, 2013
how to edit the view label in the "Styles" dialogue, so I can get the text spacing to where I want it?
I had to change fonts, and it screwed up the spacing. It is "single", but that's like 2x what it formerly was.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 4 Replies
View Related
May 8, 2012
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies
View Related
Sep 6, 2012
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
View 1 Replies
View Related
Jan 3, 2013
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies
View Related
Aug 8, 2013
I'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
View 2 Replies
View Related
May 17, 2013
Is it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
View 2 Replies
View Related
Jun 12, 2009
I drew a shape using the rectangle tool. I then added some options such as drop shadow, outer glow, etc... What is happening is if I create other shapes they automatically copy those options/styles how do I turn that off?
View 5 Replies
View Related
Aug 3, 2011
I recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).
I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.
View 5 Replies
View Related
Feb 4, 2013
Scenario: Start with a named graphic style of say 2 pt black stroke/no fill called '2.0 pt'. Create an object using said style, copy and paste it, every time I do this I get '2.0 pt 1', '2.0 pt 2', '2.0 pt 3' etc. insanely populating my graphic styles panel.
This is with CS6 (16.0.4) running on Mac OS X.6.8.
View 4 Replies
View Related
May 18, 2012
So I'm in the process of upgrading a project from C3D 2011 -> 2012. As a part of the upgrade process I'm doing some drawing cleanup such as purging unused layers/objects, purging regapps, deleting unused scales and finally taking advantage of the Styles Manager in 2012 and purging unused styles.
However, I'm noticing that almost all of my styles are coming up as "unused" unless they are attached to drawing settings, even though there is clearly objects in that drawing using those styles. I noticed this was happening when after running a purge my road profile lines were disappearing because the style no longer existed.
The items that have styles attached are DREF'd into the drawing and are not "live" objects in the drawing, if that makes any difference.
View 7 Replies
View Related
Feb 4, 2013
We did the upgrade last week and I am trying to use the drag and drop to bring styles and description keys across. Done it many times between 10 drawings. I am opening 2 drawings-one from 10 with everything I want and one in 12 to be my template.
Problem is I am only seeing one the current drawing when I click on TOOLSPACE.
View 5 Replies
View Related
Jul 9, 2012
I may not be using styles as efficiently as I should. I always seem to be creating styles to meet different circumstances. As shown below if I have any text that can have an arrow, directional or dragged state and a mask, I always end up creating more styles for times I don't want the arrow and/or the mask.
If there is a 3rd of 4th component this can multiply quickly. Am I missing an easier way to handle this or is this what is normally done?
Civil 3D 2012
View 4 Replies
View Related
Jul 29, 2013
I had this working in C3D2011 but after having severe issued with it in 2014 I went back and tested in 2012 & 2013 where it failed as well.
If I collect all supported styles using C3D 2014 & SincpacC3D's Export Styles command and export them to a newly created Database, when trying to open that new drawing it will crash C3D with no CER. Trying to run Recover on it results in a few screen flashes and back to the original drawing/screen and no opening of that new file. However, if I limit the selected styles to Export to just label styles, the drawing opens but I get this warning:
But wait, C3D2014 IS the latest version! What the heck is going on inside that code? I cannot show the full code, but the gist of it is that creating and saving a new DWG file is pretty straight forward. As soon as I add in the StyleBase.ExportTo(exportIds, outDb, dupHandler); the file becomes highly unstable.
Again, this worked well at one time, but it sure is not now and I cannot find any reason for it to be creating these bad drawings.
View 5 Replies
View Related
