I am specifically working with the Section Major Offset lable. The City of Dallas wants the lable to call out the Offset distance and direction over the elevation (example "30.0' LT."). Since zero has not offset direction the label reads "0.0' T." at the center point. Is there a way to include an if/then statement in the label style to remove the hard coded text?
View 8 RepliesIs there anyway of getting assigned Pay Items int a label style? I tried adding a text component but there is never an option for payitems.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I am trying to create label styles that match our company standards. Unfortunately the program defaults are lame.
View 9 Replies View RelatedFor some reason, the label styles is not available for all corridor. i have multiple corridor and want to label the grade (%) of a an element. See attached picture.How do i activate to label features on different corridor
View 1 Replies View RelatedI have been creating copies of various line label styles. In my toolspace where I have them listed and I can view the styles in the tree, some of the new ones I have created are a sub-base below the ones I used to copy them from (there is a plus sign next to them and the new style is below the plus sign), and others that I copied do not have a plus sign next to them. How I even did this, but I would like them all consistent, because these are part of my base template drawings.....
View 4 Replies View RelatedI have a line label style that consists of two blocks (crowsfeet). The blocks are taking on the properties of the current layer when xrefed. I have enclosed a couple of drawings to show this behavior.
Open the "crowsfeet sheet" drawing. You will notice the crowsfeet are green.
Change the current layer and regen. The crowsfeet will change to the color of the current layer.
To take this one step further:
Freeze the current layer in the current viewport. The crowsfeet disappear.
Change the current layer. The crowsfeet reappear with the color of the current layer.
The objects in the blocks are on layer 0 with a color of bylayer. Changing the color to byblock produced the same results.
The only workaround I found was to change the color of the objects in the block to something other than bylayer or byblock.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
Let's say you created some Label Styles, and want those Label Styles to be available in another existing drawing.
Do you have to insert the drawing (which has the desired Styles) into the existing dwg? I tried DesignCenter, but it does not seem to have the ability to import Label Styles or Point Label Styles.
C3d 2010 (no SP)
Win7
I set my des. key up like this: However this produces one single line of text with the description "span 0 dia. 0.0 Ht. 0" I want them on 3 separate lines, like the above picture.So I set up a label style With this component...So how I get the parameters $1 $2 $3 to go in the correct label component?
View 9 Replies View RelatedC3D 2012 on 64bit Win7 Dell everything up to date
Is it possible to create a tool pallete with label styles, like station & offset label styles? I have a million of them - alignment, profile, surface, etc., labels.
I know you can put them in a template. I searched the group but did not see anything.
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
I cannot erase certain point styles/label styles in Civil 3D. Why is this, and is there a way I can?
View 2 Replies View RelatedI wish i could plot label styles (pipe network labels, point labels, etc.) that contain background mask with the line merge setting ON. Mleaders with background mask plot fine with line merge on, but any intelligent object style containing a background mask will not 'mask' when plotting with line merge on.
View 3 Replies View RelatedIs it possible to have point label styles (or any other label styles) that only show up or print at specified scales?
If you have several view ports at different scales but showing the same area you may want to show more detail in one than another. Can annotative text be used in this way.
I know this can be controlled by having different label styles assiged to different layers and using layer manager to control what is visable, but I would like a more automatic way of doing it. Or having layers only visible or print at specified scales?
Civil3D 2014 - Windows7 64bit
Can i add sheet set fields to label styles
View 2 Replies View RelatedI am trying to set-up point and point label styles to show trees on a survey plan. The point styles is set with a block, and a label is a regular label style that shows a point number and elevation. The problem comes when the label is positioned outside of the block that represents the point. What I need is sort of fixed offset from the center of the point.
View 9 Replies View RelatedI am trying to create a label for slope ratios. I want to have the label show only whole numbers if it is a whole number and go to the 10th place only when necessary. Is there a way to use the label editor to do this? I would think it would work something like
IF(<General Segment Grade>=0|1|2|3|4|5|6|7|8|9 then <[General Segment Grade(FRun|P0|RN|AP|GC|UN|SD|OF)]> else <[General Segment Grade(FRun|P1|RN|AP|GC|UN|SD|OF)]>)
but I'm not even sure I'm going in the right direction.
am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
How do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style). Right now the default is a "finished contour" label style for all surfaces.
View 4 Replies View Relatedhow to edit the view label in the "Styles" dialogue, so I can get the text spacing to where I want it?
I had to change fonts, and it screwed up the spacing. It is "single", but that's like 2x what it formerly was.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedC3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedI'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
Is it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
View 2 Replies View Relatedhow to create actions using the new condition statements - tried google nothing step by step with examples.
I would like to crop an image to suit then have it resize vertically to a set size then stroke it with a colour of your choice (would stop and ask you to pick a colour from the image) then save it. Before conditions I made one but if the image changes the ratio of width to height during the crop it fails. Also of course before conditions it uses the colour for the stroke that I chose when making the the original action. BTW I don't have a document portrait option, document square and document horizontal only.
Lots of my macros for X5 seem to be broken with X6. How can I browse for a folder? Also what does this mean and how do I mark declare statements with a PtrSafe attribute?
Microsoft Visual Basic for Applications----Compile error:The code in this project must be updated for use on 64-bit systems. Please review and update Declare statements and then mark them with the PtrSafe attribute.
So I'm in the process of upgrading a project from C3D 2011 -> 2012. As a part of the upgrade process I'm doing some drawing cleanup such as purging unused layers/objects, purging regapps, deleting unused scales and finally taking advantage of the Styles Manager in 2012 and purging unused styles.
However, I'm noticing that almost all of my styles are coming up as "unused" unless they are attached to drawing settings, even though there is clearly objects in that drawing using those styles. I noticed this was happening when after running a purge my road profile lines were disappearing because the style no longer existed.
The items that have styles attached are DREF'd into the drawing and are not "live" objects in the drawing, if that makes any difference.
We did the upgrade last week and I am trying to use the drag and drop to bring styles and description keys across. Done it many times between 10 drawings. I am opening 2 drawings-one from 10 with everything I want and one in 12 to be my template.
Problem is I am only seeing one the current drawing when I click on TOOLSPACE.
I may not be using styles as efficiently as I should. I always seem to be creating styles to meet different circumstances. As shown below if I have any text that can have an arrow, directional or dragged state and a mask, I always end up creating more styles for times I don't want the arrow and/or the mask.
If there is a 3rd of 4th component this can multiply quickly. Am I missing an easier way to handle this or is this what is normally done?
Civil 3D 2012
I had this working in C3D2011 but after having severe issued with it in 2014 I went back and tested in 2012 & 2013 where it failed as well.
If I collect all supported styles using C3D 2014 & SincpacC3D's Export Styles command and export them to a newly created Database, when trying to open that new drawing it will crash C3D with no CER. Trying to run Recover on it results in a few screen flashes and back to the original drawing/screen and no opening of that new file. However, if I limit the selected styles to Export to just label styles, the drawing opens but I get this warning:
But wait, C3D2014 IS the latest version! What the heck is going on inside that code? I cannot show the full code, but the gist of it is that creating and saving a new DWG file is pretty straight forward. As soon as I add in the StyleBase.ExportTo(exportIds, outDb, dupHandler); the file becomes highly unstable.
Again, this worked well at one time, but it sure is not now and I cannot find any reason for it to be creating these bad drawings.
I have a set of styles created in 2010, the company I currently work for needs to have new styles added and I would like to use some of the styles I created to make my life a bit simpler in this process. I have created an Overall.dwt file using the current styles the company i work for has and I have imported my styles into this dwt. As im renaming these styles for my new company I noticed under the general tab for text style and block style I have text and block styles with my old companies name but i cant seem to find where the blocks or text style is being pulled from so i can edit it with a new name. So my question is where are these styles being saved so i can edit them
View 3 Replies View RelatedI can't find information for how a block's text is utilized in a style. Here are some details. I have a unitless block with a non annotative text size of 10. This block is part of a style with a size 'use drawing scale' of .12. At 40 scale, it inserts at 4.8 size. If I change the text size to 8 it inserts at 4.8. If I hcange the text size to 5, it inserts at 3.
My question is how are the annotation scale, block text size, and style insert size tied together? OR are there other variables influencing the scaling? I have attached a screen shot of some of my unofficial tests.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post