We did the upgrade last week and I am trying to use the drag and drop to bring styles and description keys across. Done it many times between 10 drawings. I am opening 2 drawings-one from 10 with everything I want and one in 12 to be my template.
Problem is I am only seeing one the current drawing when I click on TOOLSPACE.
my issue is I have created a style for cross sections that work well in one drawing, and need to copy them to our template. I have been able to copy the styles for the section view, section plot, and some section labels that I needed. However, I cannot find out how to copy over the style that labels my corridor section in the cross section view. When I go to look at what type of object style it is, all I get is a "Obect Style" dialog box. I have been trying to open every setting to find it and have had no luck. I have attached three screen shots. The first is what I want the cross-section to look like, the second is what it currently looks like in the template, and the third is the dialog box I am getting.
View 2 Replies View RelatedI copied a layer style (Outer glow) and pasted it on another file, value of the size in Outer glow, changed when pasted from 6 to 64. Why? How do I make copying the layer style more accurate?
View 8 Replies View RelatedHow do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style). Right now the default is a "finished contour" label style for all surfaces.
View 4 Replies View RelatedAs we have a option of creating the profile from file ,by using that option we get PVI point but not the curves so every time want to copy a alignment from one profile to another in order to maintain the same levels in both the profiles using create profile from file options curves will not be copied but its pvi points will be displayed so i need to convert those pvi points to curves .
the other method of copying is by using superimpose profile option by doing so their is one problem arises that is in the copied profile if i want to see the details of the vertical geometry of that copied alignment the details of the curve will not be displayed in that band.
Is there a way to copy a surfacce? I want to make major changes to a surface I have created but there is the possibliy of utiltiizing the existing sruface. I want to copy the surface and then make changes.
View 7 Replies View RelatedAfter offsetting a profile line vertically, lets say minus 5 feet, for design purposes, is there a way to take that new polyline that is created and making it a polyline so it can be smoothed. Almost everytime, the enginner has asked me to smooth out that polyline that I have offset vertically, because it is now going to be used as a pipe in the final design. I have been drawing a polyline over the top of the profile line, so it looks smooth........
View 4 Replies View RelatedWhen copying data from the Pipe Network Vista in C3D 2013 and placing in Excel I cannot create formulas. Have tried changing the format and it will not accept the changes.
View 1 Replies View RelatedI have a Description Key set of approximately 500 keys. I need to copy a huge range of these existing keys to new keys in the same description key set. Then reneumber them as required to match the field crews numbering system.
All I can see is the single individual copy option. This will take me several days to do, one at a time. Any method or routine to allow me to copy my range in one fell swoop?
Civil 3D 2012 is what I am running, on Windows 7 Pro.
I've created a profile view with a specific set of bands. is there a way to copy this set of bands to another profile view?
View 1 Replies View RelatedI was told that once I set up a description key that I could copy it to save time, especially on DS Keys that have blocks associated with them. Unfortunately this isn't working.
I tried copying the basic DS Key - SWMH* (I right clicked the SWMH* (code) to make a copy of it. I renamed it and, used a different block, changed the layers to zero and saved it as SSMH. I saved it, then it proceeded to change all the characteristics of the SWMH to match the SSMH.
Is there some setting that I'm missing? Is there some parent/child association that I'm missing? I know that I can proceed to create each DS key from scratch but prefer not to.
I've created a copy of my centerline alignment using the "Create Alignment from Existing Alignment" and was going to edit the new alignment to explore different options. But the new alignment can't be editted. It's lost something in the translation. There is no grip edit for the PI, that the original alignment has.
Civil 3D 2013 SP1
Dell T3500 Workstation
Intel Xeon E5630 @ 2.53 GHz
12 Gig of RAM
Nvidia Quadro FX3800
Window 7 x 64bit OS
how to drag and drop quantity takeoff criteria between civil 3d 2013 dwg files, but I can't seem to get it to work.
View 1 Replies View RelatedI want to copy just two pieces of information from a pipe network into a table. I would just generate an automatic pipe table, but those are not editable. Any quick way to copy and paste the pipe lengths and names in a network into a "regular" table?
View 7 Replies View RelatedDrawing disappear after using a dynamic block's stretch parameter?
I’ve made fairly simple dynamic blocks with lines or leaders that can be stretched and some attribute text. After moving the stretch grip of the block the block will disappear. If I then do a regen the entire drawing disappears. But it seems to be only a graphical glitch based on the fact that I can then save the disappeared drawing, reopen it and everything is up to date. I can even see my devious little dynamic blocks. But of course if I try to edit them everything will disappear again.
I am doing design for a road network. For the ease of design, I designed the main roads and split the whole network into parts. Every part will contain Main Road Alignments and alignments for a respective parts only. Now I want to combine all these into one file. When I copy all alignments into one file, the surface I created earlier is duplicating and software gets hanged.
View 2 Replies View RelatedHow can I copy a profile view style from one drawing to another? I can't seem to locate the ones I created in toolspace to be able to drag them from one drawing to another.
View 2 Replies View RelatedSo I'm in the process of upgrading a project from C3D 2011 -> 2012. As a part of the upgrade process I'm doing some drawing cleanup such as purging unused layers/objects, purging regapps, deleting unused scales and finally taking advantage of the Styles Manager in 2012 and purging unused styles.
However, I'm noticing that almost all of my styles are coming up as "unused" unless they are attached to drawing settings, even though there is clearly objects in that drawing using those styles. I noticed this was happening when after running a purge my road profile lines were disappearing because the style no longer existed.
The items that have styles attached are DREF'd into the drawing and are not "live" objects in the drawing, if that makes any difference.
I may not be using styles as efficiently as I should. I always seem to be creating styles to meet different circumstances. As shown below if I have any text that can have an arrow, directional or dragged state and a mask, I always end up creating more styles for times I don't want the arrow and/or the mask.
If there is a 3rd of 4th component this can multiply quickly. Am I missing an easier way to handle this or is this what is normally done?
Civil 3D 2012
I had this working in C3D2011 but after having severe issued with it in 2014 I went back and tested in 2012 & 2013 where it failed as well.
If I collect all supported styles using C3D 2014 & SincpacC3D's Export Styles command and export them to a newly created Database, when trying to open that new drawing it will crash C3D with no CER. Trying to run Recover on it results in a few screen flashes and back to the original drawing/screen and no opening of that new file. However, if I limit the selected styles to Export to just label styles, the drawing opens but I get this warning:
But wait, C3D2014 IS the latest version! What the heck is going on inside that code? I cannot show the full code, but the gist of it is that creating and saving a new DWG file is pretty straight forward. As soon as I add in the StyleBase.ExportTo(exportIds, outDb, dupHandler); the file becomes highly unstable.
Again, this worked well at one time, but it sure is not now and I cannot find any reason for it to be creating these bad drawings.
I am specifically working with the Section Major Offset lable. The City of Dallas wants the lable to call out the Offset distance and direction over the elevation (example "30.0' LT."). Since zero has not offset direction the label reads "0.0' T." at the center point. Is there a way to include an if/then statement in the label style to remove the hard coded text?
View 8 Replies View RelatedI have a set of styles created in 2010, the company I currently work for needs to have new styles added and I would like to use some of the styles I created to make my life a bit simpler in this process. I have created an Overall.dwt file using the current styles the company i work for has and I have imported my styles into this dwt. As im renaming these styles for my new company I noticed under the general tab for text style and block style I have text and block styles with my old companies name but i cant seem to find where the blocks or text style is being pulled from so i can edit it with a new name. So my question is where are these styles being saved so i can edit them
View 3 Replies View RelatedI can't find information for how a block's text is utilized in a style. Here are some details. I have a unitless block with a non annotative text size of 10. This block is part of a style with a size 'use drawing scale' of .12. At 40 scale, it inserts at 4.8 size. If I change the text size to 8 it inserts at 4.8. If I hcange the text size to 5, it inserts at 3.
My question is how are the annotation scale, block text size, and style insert size tied together? OR are there other variables influencing the scaling? I have attached a screen shot of some of my unofficial tests.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
Is there anyway of getting assigned Pay Items int a label style? I tried adding a text component but there is never an option for payitems.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I have been out of civil 3d for a while so a bit rusty, I like to have a surface with contours, so that I have 0.1m increments min and 0.5m max but when I go to the surface properties to amend it I would have a standard set of 1m to 5m design & 2m to 5m background etc... in the surface style...
View 4 Replies View RelatedI make a code set style by doubling the "all codes" style. Then make styles of links points and shapes in which i turn off the visibility in model. I also leave the render materials in links.
I try the set with 3d orbit. But as i turn around the model the rendering materials start to uglify..I attach an image to better understand what i am saying.
When i turn on the visibility of links the problem solved.
Trying to figure out how to define the folder I want my drawing to search in to find a specific set of point styles we have set-up. As it is set up right now, I am not sure where the program is looking to find the standard set of point styles it is showing, but its just showing basic civil point (ie. CB's, IP's, BM's, etc.). I have tried a few things to make it automatically grab the point styles I have in a set-up folder but is won;t display them.
The reason I need this, is that I want to set it up so that when I import points from my survey file, I want them to automatically insert into my drawing as the correct block (or point style), based on the survey code used.
I want to add labels for my aligments. (segments or multiple segments)
I dont see any dialog, c3d directly is asking me to click on aligments
(So I cant choose what styles I want).,
Maybe I have a variable with wrong value ? (Dont show dialog ????)
Civil 3D (2013)
I am trying to create label styles that match our company standards. Unfortunately the program defaults are lame.
View 9 Replies View RelatedI am doing my general notes
I would like the top text to be larger and a different text style than the next text can this be done
for example a title of times new roman .08
and the rest of the notes to be simplex .06
( know its not simplex but that wasnt an option)
I went to import some line label styles from my template with the Style manager and found about they were grayed out. For some reason the curve styles were not. Why would this be? The new drawing only had a standard line label style.
(running C3D 2012 sp4, Win7 64bit, 8GB)