Is there anyway of getting assigned Pay Items int a label style? I tried adding a text component but there is never an option for payitems.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I am specifically working with the Section Major Offset lable. The City of Dallas wants the lable to call out the Offset distance and direction over the elevation (example "30.0' LT."). Since zero has not offset direction the label reads "0.0' T." at the center point. Is there a way to include an if/then statement in the label style to remove the hard coded text?
View 8 Replies View RelatedI am trying to create label styles that match our company standards. Unfortunately the program defaults are lame.
View 9 Replies View RelatedFor some reason, the label styles is not available for all corridor. i have multiple corridor and want to label the grade (%) of a an element. See attached picture.How do i activate to label features on different corridor
View 1 Replies View RelatedI have been creating copies of various line label styles. In my toolspace where I have them listed and I can view the styles in the tree, some of the new ones I have created are a sub-base below the ones I used to copy them from (there is a plus sign next to them and the new style is below the plus sign), and others that I copied do not have a plus sign next to them. How I even did this, but I would like them all consistent, because these are part of my base template drawings.....
View 4 Replies View RelatedI have a line label style that consists of two blocks (crowsfeet). The blocks are taking on the properties of the current layer when xrefed. I have enclosed a couple of drawings to show this behavior.
Open the "crowsfeet sheet" drawing. You will notice the crowsfeet are green.
Change the current layer and regen. The crowsfeet will change to the color of the current layer.
To take this one step further:
Freeze the current layer in the current viewport. The crowsfeet disappear.
Change the current layer. The crowsfeet reappear with the color of the current layer.
The objects in the blocks are on layer 0 with a color of bylayer. Changing the color to byblock produced the same results.
The only workaround I found was to change the color of the objects in the block to something other than bylayer or byblock.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
Let's say you created some Label Styles, and want those Label Styles to be available in another existing drawing.
Do you have to insert the drawing (which has the desired Styles) into the existing dwg? I tried DesignCenter, but it does not seem to have the ability to import Label Styles or Point Label Styles.
C3d 2010 (no SP)
Win7
I set my des. key up like this: However this produces one single line of text with the description "span 0 dia. 0.0 Ht. 0" I want them on 3 separate lines, like the above picture.So I set up a label style With this component...So how I get the parameters $1 $2 $3 to go in the correct label component?
View 9 Replies View RelatedC3D 2012 on 64bit Win7 Dell everything up to date
Is it possible to create a tool pallete with label styles, like station & offset label styles? I have a million of them - alignment, profile, surface, etc., labels.
I know you can put them in a template. I searched the group but did not see anything.
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
I cannot erase certain point styles/label styles in Civil 3D. Why is this, and is there a way I can?
View 2 Replies View RelatedI wish i could plot label styles (pipe network labels, point labels, etc.) that contain background mask with the line merge setting ON. Mleaders with background mask plot fine with line merge on, but any intelligent object style containing a background mask will not 'mask' when plotting with line merge on.
View 3 Replies View RelatedIs it possible to have point label styles (or any other label styles) that only show up or print at specified scales?
If you have several view ports at different scales but showing the same area you may want to show more detail in one than another. Can annotative text be used in this way.
I know this can be controlled by having different label styles assiged to different layers and using layer manager to control what is visable, but I would like a more automatic way of doing it. Or having layers only visible or print at specified scales?
Civil3D 2014 - Windows7 64bit
Can i add sheet set fields to label styles
View 2 Replies View RelatedI am trying to set-up point and point label styles to show trees on a survey plan. The point styles is set with a block, and a label is a regular label style that shows a point number and elevation. The problem comes when the label is positioned outside of the block that represents the point. What I need is sort of fixed offset from the center of the point.
View 9 Replies View Relatedam in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
How do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style). Right now the default is a "finished contour" label style for all surfaces.
View 4 Replies View Relatedhow to edit the view label in the "Styles" dialogue, so I can get the text spacing to where I want it?
I had to change fonts, and it screwed up the spacing. It is "single", but that's like 2x what it formerly was.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedC3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedI'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
Is it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
View 2 Replies View RelatedWe are just starting to use the pay items through QTO Manager & Takeoff. Everything was working fine until...I deleted a hatched area that represented a Butt Joint quantitiy. Now when I go into Compute Quatity Takeoff & select the Compute button, this quantity that was deleted is still there. And, since it is now deleted, I can't find a way to remove it from the Butt Joint quantity. I've tried using "Removes pay item from specific objects." I've tried deleting all my quantities and starting from scratch.
View 2 Replies View RelatedI am having trouble understanding "Exercise 7: Creating a pay item list". How to find video of how this is created, or information to better understand the .csv and .xml utilized by QTO better. I am new to editing any .xml codes.
View 2 Replies View RelatedIs there a way to assign pay items to a selection set of closed areas? The tool seems to only allow the user to pick one object at a time.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
Using C3d 2013. I am looking for a way to place the deflection angle of the PI of an Alignment in the label of a structure part that references said alignment. But PIs aren't an option when I select Reference Text type. Common sense tells me it would be under Alignments, but none of the PI data is an option of the Contents' Text Component Editor. I couldn't find it under any of the other Reference Text types either. I can pull the station value from the referenced alignment, is there a way to get it to tell me the deflection angle at the PI it sits on? Or even the difference in the instantaneous direction just before and just after the part?
I know listing the deflection angle of a PI is possible, as I have seen it in several examples of labeling alignments. I just want to place it in the label of other objects.who can tell me how to display LT (to represent left) and RT (to represent right) when the deflection is positive or negative respectively.
I'm having trouble viewing a list within Toolspace Item View. When I click the item in the tree nothing shows up in the item view. There should be a list of all my parcels but there is not. Graphical view works fine. List view works fine with other items in my tree except for my parcels. Also, when i right click parcels and click refresh I can see the list genereate in item view but then it quickly disappears.
View 9 Replies View RelatedI have a corridor design and the corridor daylights very close to the pavement. I need to have rock from the EOP out beyond the daylight point to a 30' offset from the alignment. I need it to follow the EG and show a depth of 2' throughout.
I had to draw the rock shapes manually. But I'd like to figure out how to do it using the corridor if possible.
Please see the attached image. Everything beyond the daylight point was traced on top of the EG and then offset 2' to get the bottom.
I go to erase a line or a piece of text or block, doesn't seem to matter really. Anyways I select one too many items so I hit "r" for remove and select the item to remove and bam, I fatal error, civil 3D shuts down, asks if I'd like to save the file and then also submits an error report to the great unknown.
Civil 3D 2013, on 64 bit Windows 7 with all updates.
In the documentation API 2014: for SuperelevationCriticalStationCollection appears the property "Item":
[URL]
but I´m trying to use it and it doesn´t exist.
public static void Breaksegment(Autodesk.AutoCAD.DatabaseServices.ObjectId identificador) { try { Document doc = Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; using (DocumentLock docLock = doc.LockDocument()) { using (Transaction trans = db.TransactionManager.StartTransaction()) { Alignment align = trans.GetObject(identificador, OpenMode.ForWrite) as Alignment; SuperelevationCriticalStationCollection criteriaStationColl = align.SuperelevationCriticalStations; criteriaStationColl.Item trans.Commit(); } } } catch (System.Exception ex) { System.Windows.Forms.MessageBox.Show(ex.Message); } }
I have added the Reference:Assembly: AeccDbMgd (in AeccDbMgd.dll) and I ´m using Autodesk.Civil.DatabaseServices
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
Some times I note the lack of a top warning-icon placed on top of prospector folder.
The idea is, for example, that in case I had a corridor out of date I dont see this "situation" until I navigate up to the corridors/corridor item, so I can forget easily the rebuild need. The posibility to see this icon near the name of my drawing should be very useful.
Civil 3D (2013)