Lightroom :: Locking Default Options For Import?

Oct 28, 2013

Could we have a more definitive way to establish personal defaults for IMPORT.
 
When I import from my camera card, I normally start in the Folder sub-panel of Library and do a right-click "Create a new folder inside ..." and then after that is completed I select the folder just created and right click again and "Import to this folder ..."
 
This brings up IMPORT with my destination already visually established AND the folder already created within my folder structure and then all I need to do is quickly verify my options and click IMPORT in the lower right corner.
 
But for the life of me, I couldn't get my options to be sticky ... e.g. preview resolution, destination, etc.  I'd set them, do the IMPORT as above, finish it and when I'd go back in they wouldn't have been left the way I set them.  But I knew that sometimes this DID happen.
 
Turns out that if you invoke IMPORT via the button in the lower left corner of Library and complete the sequence (rather than import to this folder via a right-click) ... then options set from that initiation point are sticky and are rembered the next time you go in.
 
My question is: could we not have a more specific way of saving the defaults on the screen so no matter how you entered IMPORT, you can establish your default and 'lock' it.

View 1 Replies


ADVERTISEMENT

Lightroom :: How To Set Up A Default Import Location

Jan 29, 2013

How would one set up a default import location, such as a directory below "My Pictures" or a flash drive?  I don't see a way to create a macro or a preset that would step straight into a directory holding new images. In Windows, there are about six or eight levels from the top of the hierarchy to a location below My Pictures. There should be a way to automate the source location.

View 1 Replies View Related

Lightroom :: Change 4 Import Default?

Mar 27, 2013

I am using Lightroom 4. I changed my import settings to a preset location. Is there a way to make that my default setting so I do not have to select it each time that I import?

View 2 Replies View Related

3ds Max :: Locking Position Of Import Model?

May 31, 2013

I'm trying to move a model that i've imported into a scene that has another model in it. When I select the model and translate it using "select and move" and then go to save the model, it snaps back to it's original position where it was imported.

View 2 Replies View Related

Lightroom :: Change The Default Import Location?

Mar 27, 2014

Right now my default import location is pointing to my c drive and I need it to go to my E drive

View 2 Replies View Related

Lightroom :: Can't Import New Photos To Default Catalog In 3.5

Jan 19, 2012

I'm running LR3.5 on OSx10.5.8 and recently I've lost the ability to import new photos (from hdd). My default catalog (so far I've been using only one) contains appx.33k photos and I can't import new shots. Yesterday I was shooting tethered camera and everything went fine. Today I wanted to import new files (from hdd) and noticed that "import button" is completly inactive. Dead. I set up a new catalog and managed to process todays photos but when I'm switching to previous catalog the "import" button is still dead.

View 9 Replies View Related

Lightroom :: Permanently Change Default Import Location In 3.5?

Nov 3, 2011

I am trying to change my default import location on my MAC Pro Tower, to one of the internal HD's.  I have named the HD Photo Location, and have created a folder in it called it "My Lightroom Photos".  I have been able to create this, but cannot seem to ber able to make it my default when I open LR 3.5.  I have to manually go in and change it.  Is there a way that this can be changed to make it my default?

View 4 Replies View Related

Lightroom :: Change Default Import Directory From My Pictures To Somewhere Else?

Mar 31, 2011

Is it possible to change the default import directory from "My Pictures" to a different directory? It gets tedious to have to specify the directory I want to use every single time I import and I have not found a way to make this change sticky.
 
That seems like it should be a preference but I can find no way to make this change.

View 6 Replies View Related

Lightroom :: Why Clarity And Vibrance Sliders Always On By Default - When Import

Apr 14, 2013

Fairly new to LR. I notice that whenver I import photos and open them up in the Develop module, the Clarity slider is set to 30 and the Vibrance slider is set to 25. I've repeatedly cleared the slider settings back to their defaults, but when I import another photo and open it up, the same exact thing happens.
 
Is this the way it's supposed to work? Is LR making auto adjustments based on what it thinks the image needs?

View 4 Replies View Related

Lightroom :: Change Default Destination For Files To Import?

Jul 12, 2013

How can I tell LR to import to a new destination drive? I found a similar question for LR 3 a couple of years ago, which says in the import dialog box, choose destination. That doesn't seem to be there now. In any case, I want LR to import to the new destination all the time, not just as a one-off. My HD is full and I can't keep moving files manually.

View 2 Replies View Related

Lightroom :: How To Change Import Presets Back To Default Or None

Aug 26, 2011

How to change my import presets back to default or none.  I changed it on a photo and now my pics are all yellow. How to change.  I reset and it still does it.

View 3 Replies View Related

Lightroom :: Import (or Create) Default Settings From A Existing Document?

Feb 15, 2014

Can I import (or create) default Lightroom settings from an existing document and save them? Make them a personal default set opening with all future LR catalogs?

View 2 Replies View Related

Lightroom :: How To Get Custom Default Settings To Enable Lens Profile Corrections Automatically On Import

Jan 20, 2012

I have created default settings by serial number for my Canon Mark III 1ds which include enabled lens profile corrections.  I then created a user preset with these default corrections.  Next I imported a folder of RAW images shot with this same Canon camera with the user profile checked as part of the import.  When I switch to the Develop module and check the Lens Corrections panel, I see that although it is checked for each file, the actual make, model and profile are not populated. 
 
Is this a bug or am I overlooking something on import?  I understand that in LR 4, you can apply specific lens and camera calibration profiles to camera serial numbers (noise reduction etc too).
 
MacPro 2.8 Ghz Quad-Core Intel Xeon with 16 gigs of ram running OSX 10.7.2.

View 3 Replies View Related

Photoshop :: How To Default All Options

Dec 13, 2007

how to Default all photohop options. like colors..properties etc.

View 2 Replies View Related

After Effects :: Default Render Options

Feb 12, 2014

I don't know what the best practices are for rendering, but I've got settings I prefer to use, and I want to set them as a default in AE, but can't seem to find that option
 
First, they deprecated h.264.  it's really the only valid option for rendering tight compression to be viable size for uploading. but i enabled the feature to show old formats.What I need to do is set it so it automatically defaults to my settings. it's a real pain to have to manually change that every time I render.
 
Also, along these lines I have a related question. Well, related sort-of.
 
I use Adobe Media Encoder when i can, i realize this is one reason they deprecated h.264 fronm AE. BUt what I don't get, is why I can't render anything that's GPU heavy in ME? for instance, if I use Element 3d it will utilize the cuda cores heavily in my video card. But I can't render those in ME. when I try to I get many many many many back to back errors and it finally jsut fails. I have a supported video card, though not a 'top dog' it's a GeForce GTX 770 which is plenty to tackle the work.

View 7 Replies View Related

Xara :: Can't Change Unit Default In Options

Oct 23, 2012

I purchased Xara 8 in June but now have a new computer. I downloaded the program to my new computer and all seemed to be okay with the install, but I can't change the unit default from millimeters to inches. In fact I can't change the units to anything; it keeps reverting back to millimeters. Then I tried changing the font default and it changed it to millimeters no matter which unit I chose. I don't know if any of the other options can be changed. I generally change them as I need them. Should I uninstall it and try again? I lost my CD copy to theft and have to use the online download.

View 4 Replies View Related

CorelDRAW X6 :: Set PDF Export Options For Default Magnification On Open?

Jan 9, 2013

Basically when I export a PDF and open it in acrobat it opens 'page width' I'd like it to be 'fit page' so the customer sees the whole proof, not just the top of the page.

I don't see any settings, but I only have 1 fully functional eye so I thought I'd ask you all.

IF there isn't a setting for it, can the fine people at Corel add this setting in the export dialog in the future some time? That'd be awesome.

Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6

View 3 Replies View Related

VideoStudio :: Change Default Options When Creating Video?

Mar 26, 2012

how to change the default options when creating a video?

I keep forgetting to turn off "smart render" and "non-square pixel rendering" in the options dialog when I convert.

Also it would be nice to be able to turn on Dolby 5.1 by default as well.

View 2 Replies View Related

AutoCAD Inventor :: Change Default In Options For PDF Export

Feb 2, 2012

How to set a default under options for export to PDF? I need to set the Vector resolution so it defaults to 720 DPI instead of 400 DPI.

Inventor Suite 2013 Ultimate

View 2 Replies View Related

Photoshop :: Change/Save Default Blending Options

Aug 26, 2007

I rarely (never) use the default color or stroke size of my blending options so I always have to go through the process of changing those with every layer. There's got to be a better way. I would like to have my blending options default to what I use most so I could simply click stroke and move on.

How do you change/save the default blending options?

View 3 Replies View Related

GIMP :: Unable To Use Non Default Zoom Options At The Same Time

Dec 27, 2012

I like to use non-default zoom options like 35% and 75%, but I can't use them both at the same time, and whichever one I'm using disappears every time I open a new image or restart the program. It would be nice if the zoom was controlled by a vertical slider that can go to any number between 1 and 800, or at least 1-100.

View 1 Replies View Related

AutoCAD Inventor :: How To Set Default IGES File Save As Options

Apr 18, 2011

My company outputs IGES files and we always use the settings "Surfaces" and "144-Trimmed", however, the default for Sufrace Type is "143-Bounded" so we have to open up the options dialog box and change to "144-Trimmed" every time.  How can I set Inventor's Default to "144-Trimmed" so I never have to mess with it again?

View 6 Replies View Related

Photoshop Elements :: 11 - Change Default Setting On JPEG Options?

Mar 8, 2013

how to change the default setting under Jpeg options when saving changes, at present its ticked for Qulaity 12 Max but we want it on Quality 8 high and its a real pain having to change this setting every time we edit an image.

View 7 Replies View Related

CorelDRAW Graphics Suite X6 :: Print Preview - All Options Gone Back To Default

May 9, 2013

I use Print Preview in X4 for all printing - great tool.

When I use Print Preview in X6 the print options are not saved when I exit Print Preview to make adjustments.

I make the correction - go back into Print Preview and all options have gone back to default. Is there anyway of correcting this.

View 1 Replies View Related

Lightroom :: Locking Cells In Custom Template?

May 15, 2013

I have created a custom template in LR.  It holds 6 unique images.  What I want to do is lock the image cells in place while I'm in production.  What's happening is sometime I'll get going and when I drop in the image or move the image around in the cell, I actually MOVE the cell instead of the image within the cell. Then I have to stop, realign, etc and then I can move on.  

Is there a way to LOCK cells once you have the template set so that this doesn't happen?  Then unlock when I need to move or edit the custom template?

View 2 Replies View Related

Photoshop :: Import Options For 3D Models

Aug 17, 2012

Why is it that Photoshop doesn't import 3D models for popular software like Cinema 4D (C4D) while the U3D extension of that weird and unpopular unprofessional heavily copied but little used Ulead cool 3D is in the list? I think it would be much more important to be able to import C4D files.

View 4 Replies View Related

Photoshop Elements :: Adobe Organizer Import Options

Feb 3, 2013

I'm using Photoshop Elements 11 and Premiere Elements 11. Both program are using one organizer and I would like to import my videos and photos with this tool. But I'm missing two options  in this tool. The first is to make sub-folders with the capture-date without spaces between the date (spaces are still problems for some programs). The second option is a second location where the data is copied for backup. Is there a possibility to do this two options with the program or can you make an update in the future that include this two options.

View 1 Replies View Related

Photoshop Elements :: Unable To Select Import / Export Options On Adobe 11?

Jun 26, 2013

On the drop down menu on my pse11 the import/export options are unselecteable, why this is and how it can be resolved as I would like to be able to import things.

View 1 Replies View Related

Illustrator Scripting :: TIFF Import Options - Flatten Layers To A Single Image

Mar 26, 2013

Running a script to open up files and convert to another type. When it gets to a TIFF type file a dialog window titled 'TIFF Import Options' is opening. This windows has an Options column that contains two radio selections for 'Convert Layers to Objects' and 'Flatten Layers to a Single Image'. How would I open the file with the 'flatten layers to a single image' set?

View 1 Replies View Related

Illustrator :: Live Trace Tracing Options Shows Set Default Instead Of Trace?

Jan 5, 2013

how to use Live Trace in Illustrator but now instead of the Tracing Options window having a button that says "Trace" it's now showing a button that says "Set to Default." I'm sure something isn't selected right or something similar, but I can't figure it out. why "Trace" is no longer an option?

View 2 Replies View Related

AutoCAD Inventor :: Building Design Suite Ultimate - File Export / Import Options

May 4, 2013

One of the common processes we have to do is to transilate file formats into a type we can use. Most the time it is for use in AutoCAD MEP...

Is there a good one-stop place to get info on import export options from / to softwares included in Autodesk Building Design Suite Ultimate?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved