AutoCAD 2010 :: Drawing View Fails To Update
Jun 6, 2011
When I place an Inventor 2012 part into an AutoCAD 2012 layout, the drawing view fails to update after a change is made to the Inventor file. When I click "Update View" in AutoCAD the command line says, "1 view(s) is up to date.", but the drawing does not change. Both the AutoCAD drawing and the Inventor part file are located on a server drive which is mapped as a network drive. AutoCAD displays the correct path in the drawing view properties. Running Windows 7 x64.
View 3 Replies
ADVERTISEMENT
Mar 5, 2012
I updated a working cad station with the lastest pathes. It loaded the new MS Dot Net framework 4. Now Acad crashes if you open it, see below. If you click on an existing drawing it opens and you can work with no problems.
My question is - Is Acad 2011 compatable with the new DotNet 4? The fault module below is DotNet. The old drawings were created using 3.51 DotNet so it looks to me it tries to use the dot net 4 on new drawing.
Problem signature:
Problem Event Name: APPCRASH
Application Name: acad.exe
Application Version: 24.1.208.0
Application Timestamp: 4dbf9c16
[code]...
View 9 Replies
View Related
Sep 27, 2013
After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
View 3 Replies
View Related
Jan 27, 2012
Trying to the base view system in acad 2012. Got inventor model and want to document in acad. New blank layout tab. Select base view and as model space is empty it asks for inventor file as it should. I select my ipt file.
it then says 'invalid autodesk inventor file C:projects......'
the command then closes.
I created brand new part, plain cube, and still the same.
View 1 Replies
View Related
Jan 3, 2012
I've got a macro which is creating .ipt and .idw files from templates. I'm once created I'm replacing the reference in the .idw to refer to the newly created .ipt file. The problem is that the drawing view isn't updating... I've make the .ipt file dirty then udpate the drawing, but that hasn't worked. I've tried just using the drawingdocument.update function, but that hasn't worked either...
View 6 Replies
View Related
May 3, 2012
I have been trying to get a list of xrefs contained within a drawing to auto update by using Rtext.
I have got as far as using the following diesel expression.
Xref's in this file are indicated as - Xref name [Filepath]
$(Xrefs,3,)
$(Images,3,Images in this file: )
This gives me more or less what I want but I dont want to show the file path. What changes to the expression I need to do to achieve this.
View 2 Replies
View Related
Mar 27, 2013
I am looking for some code or something which can change the title block revisions from "01" to "02" in multiple drawings.
The title block revision block is set in attributes.
View 5 Replies
View Related
Oct 15, 2012
I have a basic floor plan in AutoCAD 2012 that has blocks in specific locations which contain personel data....name, phone, computer tag, desk key numbers, etc. I extracted the data to an Excel spreadsheet and I thought set up a "data link". But I don't know how to make the data update.
My problem...moves of staff, phone, computers are often made, but no one lets me know about it until they want a new floor plan printed and the computer and key tags get so messed up from the moves that it can take me hours to fix.
My goal is to be able to have our secretarial staff update the spreadsheet and in turn update the blocks in my AutoCAD drawing when it is opened and/or "updated".
View 3 Replies
View Related
May 31, 2012
I have observed that I don't have the "Drawing View Panel" under the Annonate Tab. Try to right on the Annonate tab and go to show panels but the Drawing View panel is not on the list. How to add the Drawing View Panel?
View 4 Replies
View Related
Nov 5, 2012
Parts generated with the FG can be changed with the 'Change' option within the Frame Generator menu in the Design -tab on the ribbon.
However, when I change the size of the profile thru this menu all properties will be changed according to the settings of the table in the Content Center, except the Description property.
The Description column in the table is configured with the size of the profile and is mapped to 'project.description'.
I'm using Inventor 2013 SP1.1
View 8 Replies
View Related
Sep 2, 2002
The Photoshop 7.0.1 update fails when I try to run it on Windows XP Pro. I have reproduced this error two times, once on a fresh installation of Photoshop 7. I receive a ComponentMoveData Error: Media Name: data Component: FileGroup: File: .
View 19 Replies
View Related
Jun 15, 2012
i'm using Photoshop CS6 with Camera Raw 7.0. I have a D800 (which is why I purchased CS6) and attempted to update to CR7.1 I get the following error:
Photoshop Camera Raw 7.1
Update is not applicable. Error Code: U44M1P28
I've cleared my prefs, tried the standalone installer, rebooted, all to no avail.
Here is my system info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Mac OS 10.7.2
System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3400 MHz
Built-in memory: 16384 MB
Free memory: 10271 MB
Memory available to Photoshop: 15083 MB
[code].....
View 3 Replies
View Related
Oct 3, 2013
I had an alert to update Photoshop but after three attempts it reaches 56% then fails. It is accompanied by a message to contact customer care and gives the number: U44MIP34. I have retried after a restart but with same result. Then I tried again after running AVG registry cleaner equally without success. Could it be a time difference between US and UK?
View 1 Replies
View Related
Oct 8, 2008
I get a message on my computer that there's an update to install, but when I attempt to install it, it goes through the motions of installing itself, then says it couldn't install itself and that I have to reinstall the original product so that it can install itself. I'm very reluctant to go through the whole installation process all over again, so I'm curious if there's any other way to get these updates. This is a registered product by the way, in my name.
View 1 Replies
View Related
Mar 20, 2014
I have just updated Illustrator CC to v17.1 and now it will no longer launch.There is a bouncing icon in the dock for about a second and then no activity, no warnings or errors.My mac is quite old (MacPro5.1 Quad-core running osx 10.6.8) which may well be the problem.Never the less Illustrator 17.0 ran perfectly well prior to the update.
Uninstalling Illustrator 17.1 and reinstalling v17.0 works.If Illustrator is allowed to update as recommended it no longer launches.Is there something in the update that prevents my older spec mac from running it?
View 2 Replies
View Related
Jun 18, 2013
i get the green progress bar.. then suddenly a error message "can not install application manager".of course no further explanation... tried a few times.we use CS6 with a volume license at work.
View 7 Replies
View Related
Aug 24, 2012
Installing OEM software with a new printer update camera raw fails.
View 6 Replies
View Related
Oct 29, 2013
I have tried installing this update and it gets to 99% then fails.....
View 4 Replies
View Related
Jan 2, 2014
Just started a pen tool exercise in illustrator, at some point while using the pen tool I don't know why or how it happens but my screen stops "updating", "refreshing" or "drawing" while I drag it with the hand tool. What I mean is that if I start dragging with the hand, the rulers move as normal, but anything inside just stays a still picture and only when I release the mouse button is the screen changed to where I have dragged. Although the very edges of the artboard/workspace near the rulers behave normaly, I can see bits and pieces flying past there, but it's like there's this big square at the center of my screen that is a still image.
The problem is only inside Illustrator, the rest of my computer and screen behave normally.
I am using Windows XP SP 3, all updates 'n' stuff.
View 4 Replies
View Related
Dec 14, 2012
I updated Camera Raw today (12-14-12) through the Adobe Software Updater. Now when I start PSE 11, I get a message that the software has exceeded its activation limit.
I rebooted the computer, and the same problem re-occurred. Upon startup, PSE 11 pops up a message that the software activation limit has been exceeded.
Let me be clear, I bought the application from Adobe, I have a valid license that was delivered from Adobe via email, the software has only ever been installed once, on this machine.
View 1 Replies
View Related
Dec 11, 2012
this has been only happening since updating this morning from 13.0.1 - 13.0.2...I have a problem where if I create a new curve layer and then press the preview button on/off it fails to re render the preview and nothing else happens until I OK it. I also notice that it creates history entries on the history panel like I'm making adjustments? Weird!
There's been a few other noticeable things too. The liquify window now doesn't draw as nice and smoothly as it did with 13.0.1. The cursor jitters a lot and control isn't as smooth.
View 2 Replies
View Related
Nov 19, 2013
A colleague was working on a drawing yesterday in AutoCAD 2013 when it crashed. Since then the drawing has refused to open in AutoCAD 2013. It also does not open Trueview. It will however open in previous version of AutoCAD. We tried to export it to .dxf as well but they are corrupt. We also tried to attach it to a new drawing as an Xref and as a block, both were met with an instant fatal error and the closure of AutoCAD.
We have tried auditing, purging, resaving, using backs-ups. None of them will open in AutoCAD 2013 any more. The drawing closes without attempting to open with no error messages. It just loads up the default drawing(x).dwg.
View 9 Replies
View Related
Nov 21, 2013
I am wondering if it is possible to do a style update (or style update check) upon open of a drawing?
The example would be that I have stuff made from way back that the colors/dimension sytles ect dont match the current standard and upon opening a file where they are not current, it would either prompt to update immediatly OR update automatically with no prompting (preferred method).
I am doing a massive amount of updates from old files recently and to save myself 1 - 3 clicks per drawing would be wonderful.
View 5 Replies
View Related
Jun 14, 2012
Am publishing dwgs / saving as .pdfs / Preview looks good, but when I plot, one line of text appears as series of dots and the error msg from Adobe is close to "Cannot find ArialMT font, some text may not format or print correctly...."
My co-workers have no problem publishing these same dwgs from their workstations, however. Also, there are several text objects / boxes in the dwg, and they all print fine 'except' for the one.
Restarting etc., doesn't make any difference. Neither does plotting in Preview or Draft and so on.
View 2 Replies
View Related
Jan 24, 2012
I am using a fairly old Lisp to generate section arrows, started using this in 2000 and up until 2011. Since we have installed 2012 the routine does not work correctly, after inserting block with attributes instead of bringing up dialogue box it inserts next line of string in to the dialogue box. I have attached lisp routine and blocks
View 6 Replies
View Related
Aug 13, 2012
I never saw it prior to installing SP2 on 2012... (currently downloading SP2.1 to see if it fixes the issue...)
I have two viewports on the same sheet, one at 1"=30', and one at 1"=100'. Cogo Point symbols/labels will print correctly on one viewport, but not on the other. It seems to be related to whichever one I went into last. If I go into the main viewport at 1"=30', then the Cogo Point labels/symbols in the 1"=100' viewport turn very tiny when issuing "Export to Autocad 2010". If I go into the 1"=100' viewport last, then the Cogo Point labels/symbols in the other viewport blow up into huge gigantic things.
I've NEVER seen this behavior before. It's getting incredibly frustrating, since our client requires a plain AutoCAD 2010 drawing, and the Export feature is flat-out not working anymore. And if I try exploding Cogo Points prior to exporting, then they disappear from the Point Table.
View 5 Replies
View Related
Apr 29, 2012
I have repeatedly attempted to export a simple drawing as a PDF and it doesn't take. I get an error message that the plot failed because there is nothing to plot (paraphrased).
Does export as a PDF not work or not in the Student version or?
View 7 Replies
View Related
Jul 20, 2011
Autocad failes when i tried to directly opening a file from recieved attachment email. whereas it opens it properly when i save the files to hard disk drive.
View 4 Replies
View Related
Aug 16, 2012
Out of the blue, when I re-import Photoshopped files back into LR3, they fail to appear in Grid View. But they DO APPEAR in the 'Import' screen, grayed out, as normal. So why is LR suddenly not showing them in Grid View.Here's a screenshot of the import window that clearly shows the image that does NOT appear in Grid View. Notice that image# 2012_3_4-Edit.tif resides immediately next to it's original 2012_3_4.tif file. It obviously is part of the catalog, LR knows it's there but it does not appear in the Grid. I really need a solution to this because I've build my workflow around moving files around with LR and this is a major setback for me now.
View 14 Replies
View Related
May 6, 2013
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies
View Related
Nov 25, 2008
Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies
View Related
