Illustrator :: Screen Freezes And Fails To Update While Dragging?
Jan 2, 2014
Just started a pen tool exercise in illustrator, at some point while using the pen tool I don't know why or how it happens but my screen stops "updating", "refreshing" or "drawing" while I drag it with the hand tool. What I mean is that if I start dragging with the hand, the rulers move as normal, but anything inside just stays a still picture and only when I release the mouse button is the screen changed to where I have dragged. Although the very edges of the artboard/workspace near the rulers behave normaly, I can see bits and pieces flying past there, but it's like there's this big square at the center of my screen that is a still image.
Â
The problem is only inside Illustrator, the rest of my computer and screen behave normally.
Â
I am using Windows XP SP 3, all updates 'n' stuff.
View 4 Replies
ADVERTISEMENT
Mar 20, 2014
I have just updated Illustrator CC to v17.1 and now it will no longer launch.There is a bouncing icon in the dock for about a second and then no activity, no warnings or errors.My mac is quite old (MacPro5.1 Quad-core running osx 10.6.8) which may well be the problem.Never the less Illustrator 17.0 ran perfectly well prior to the update.
Â
Uninstalling Illustrator 17.1 and reinstalling v17.0 works.If Illustrator is allowed to update as recommended it no longer launches.Is there something in the update that prevents my older spec mac from running it?
View 2 Replies
View Related
Sep 2, 2002
The Photoshop 7.0.1 update fails when I try to run it on Windows XP Pro. I have reproduced this error two times, once on a fresh installation of Photoshop 7. I receive a ComponentMoveData Error: Media Name: data Component: FileGroup: File: .
View 19 Replies
View Related
Jun 15, 2012
i'm using Photoshop CS6 with Camera Raw 7.0. I have a D800 (which is why I purchased CS6) and attempted to update to CR7.1 I get the following error:
Â
Photoshop Camera Raw 7.1
Update is not applicable. Error Code: U44M1P28
Â
I've cleared my prefs, tried the standalone installer, rebooted, all to no avail.
Â
Here is my system info:
Â
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Mac OS 10.7.2
System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3400 MHz
Built-in memory: 16384 MB
Free memory: 10271 MB
Memory available to Photoshop: 15083 MB
[code].....
View 3 Replies
View Related
Oct 3, 2013
I had an alert to update Photoshop but after three attempts it reaches 56% then fails. It is accompanied by a message to contact customer care and gives the number: U44MIP34. I have retried after a restart but with same result. Then I tried again after running AVG registry cleaner equally without success. Could it be a time difference between US and UK?
View 1 Replies
View Related
Oct 8, 2008
I get a message on my computer that there's an update to install, but when I attempt to install it, it goes through the motions of installing itself, then says it couldn't install itself and that I have to reinstall the original product so that it can install itself. I'm very reluctant to go through the whole installation process all over again, so I'm curious if there's any other way to get these updates. This is a registered product by the way, in my name.
View 1 Replies
View Related
Jun 18, 2013
i get the green progress bar.. then suddenly a error message "can not install application manager".of course no further explanation... tried a few times.we use CS6 with a volume license at work.
View 7 Replies
View Related
Aug 24, 2012
Installing OEM software with a new printer update camera raw fails.
View 6 Replies
View Related
Oct 29, 2013
I have tried installing this update and it gets to 99% then fails.....
View 4 Replies
View Related
Jun 6, 2011
When I place an Inventor 2012 part into an AutoCAD 2012 layout, the drawing view fails to update after a change is made to the Inventor file. When I click "Update View" in AutoCAD the command line says, "1 view(s) is up to date.", but the drawing does not change. Both the AutoCAD drawing and the Inventor part file are located on a server drive which is mapped as a network drive. AutoCAD displays the correct path in the drawing view properties. Running Windows 7 x64.
View 3 Replies
View Related
Dec 14, 2012
I updated Camera Raw today (12-14-12) through the Adobe Software Updater. Now when I start PSE 11, I get a message that the software has exceeded its activation limit.
Â
I rebooted the computer, and the same problem re-occurred. Upon startup, PSE 11 pops up a message that the software activation limit has been exceeded.
Â
Let me be clear, I bought the application from Adobe, I have a valid license that was delivered from Adobe via email, the software has only ever been installed once, on this machine.
View 1 Replies
View Related
Mar 5, 2012
I updated a working cad station with the lastest pathes. It loaded the new MS Dot Net framework 4. Now Acad crashes if you open it, see below. If you click on an existing drawing it opens and you can work with no problems.
My question is - Is Acad 2011 compatable with the new DotNet 4? The fault module below is DotNet. The old drawings were created using 3.51 DotNet so it looks to me it tries to use the dot net 4 on new drawing.
Problem signature:
Problem Event Name:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â APPCRASH
Application Name:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â acad.exe
Application Version:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 24.1.208.0
Application Timestamp:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 4dbf9c16
[code]...
View 9 Replies
View Related
Dec 11, 2012
this has been only happening since updating this morning from 13.0.1 - 13.0.2...I have a problem where if I create a new curve layer and then press the preview button on/off it fails to re render the preview and nothing else happens until I OK it. I also notice that it creates history entries on the history panel like I'm making adjustments? Weird!
Â
There's been a few other noticeable things too. The liquify window now doesn't draw as nice and smoothly as it did with 13.0.1. The cursor jitters a lot and control isn't as smooth.
View 2 Replies
View Related
Apr 5, 2009
Has anyone else noticed the the screen redraw does not allways happen after moving a slider in Version 11.1. Quite often I have to change the fit to screen or fill screen to have a redraw preformed. I also sometimes need to flatten the layers in order to save the file. Another abnormality I came across was trying to save a >2 GB PSD panoramic file in 64 bit PS creates an error message that the file cannot be saved. "Greater than 2 GB". This means I have to flatten the image before saving. System is Vista 64 bit Ultimate with 8GB memory, 200 GB scratch drive.
View 6 Replies
View Related
Jul 1, 2012
Why does dragging on a Touch Screen change the cursor into a Hand Tool? This did not happen in CS 5.5 and I could edit on my touch screen monitor. With Photoshop CS 6, as soon as I start to drag, the cursor changes to a hand cursor. I have look at all of the system options and nothing seems to affect it so I have to assume it is something wrong with Photoshop CS 6.
View 3 Replies
View Related
Jul 10, 2012
I was wondering if it will be possible to rearrange layers by simply dragging them?I'm asking this because clicking on the move up/down buttons can become tedious when you have a lot of layers.Also will it be possible to auto hide the toolbar or enter a fullscreen mode?
View 2 Replies
View Related
Nov 5, 2012
Parts generated with the FG can be changed with the 'Change' option within the Frame Generator menu in the Design -tab on the ribbon.
However, when I change the size of the profile thru this menu all properties will be changed according to the settings of the table in the Content Center, except the Description property.
The Description column in the table is configured with the size of the profile and is mapped to 'project.description'.
I'm using Inventor 2013 SP1.1
View 8 Replies
View Related
Dec 30, 2005
All of a sudden I have a strange problem. I am unable to paste into adobe photoshop once I press the print screen button. I am however able to print into the likes of paint or other applications, but it seems to tbe photoshop that is affected.
If I copy a image from a website or so and paste in photoshop it works.
I would guess that it may be something to do with the internal clipboard of the application, but has anyone any ideas. I still use Photoshop 7 for what it is worth on XP.
View 2 Replies
View Related
Sep 9, 2005
Photoshop CS freezes on splash screen. I have been using this since CS first came out without problems. Now it will not go beyond the screen and locks up with 100% CPU usage. Athlon Barton 2500 w/2G Corsair Ram, 2 - 160G Seagate 7200 HD's configured with Raid +1. All other programs work normally...just PSCS
Should add that I have uninstalled CS and reinstalled it. I have also removed each 1G stick of Ram and tried it...then swaped the other stick...
View 2 Replies
View Related
Mar 5, 2012
I'm a school teacher in the PLTW program that uses Inventor extensively in my classroom. Our district operates under a 125 seat license. The issue I've run into is on my personal computer (Windows Vista, x64) and is therefore outside the realm of the usual IT guy's duties. The Inventor software was installed on my laptop by the PLTW training staff during my summer session. I *think* it is a stand alone install of the program.
What happens is after I launch Autodesk Inventor, I can see the splash screen, and the inventor.exe task appears in the task manager, however after a few seconds, the splash screen disappears and the program does not launch. There is no error message.
This is confusing since until quite recently I am sure that Inventor was working hunky dory. Also, all the other Autodesk programs seems to function normally (Fusion, Design and Review)
I've tried a repair and reinstall, but the problem still persists. Also, I updated the install with SP 1, but this had no effect either.
I have recently updated my display drivers (ATI Radeon), however, I tried reverting back to the older drivers and still the problem persists, so I don't think it is graphics driver related
View 2 Replies
View Related
Oct 31, 2012
The editor program in PSE7 does not properly recognize the screen size of my monitor. Some photos and parts of menus fall outside the viewable area to the right side. How can this be fixed? Can some setting be easily changed? Do I need to reload some part of the program?
View 9 Replies
View Related
Oct 11, 2012
I am trying to stack a number of TIFF images. When I start the process, I cannot minimise the window or hot key into any other. I can get to other processes via the Start button but once up, they stay up unless I load something else on top of them. Left to itself, it can stay like this for several hours. It has got worse over time and the function has become unusable.I am using Photoshop CS5 64 bit. The computer runs Windows 7 64 bit SP1.
Intel Core i7 860 2.8 GHZ Processor
16 GB RAM
ATI Radeon HD 5450
Â
Task Manager says I am using 12% CPU and 28% RAM..The status alternates between 'running' and 'not responding'..I am not running any other applications.I am thinking that I do not have Photoshop set up properly.
View 1 Replies
View Related
Dec 29, 2011
I have just installed VSx4. I successfully made a project, and saved it, but when I go to the 'Share' stage, I cannot burn a DVD. All the steps complete, including preview, but when I click Burn the screen freezes at commencement, showing 3% complete and 'converting title'. Only the Cancel button appears active, but clicking on it yields no result. I noted that the DVD writer line on the menu, despite showing correct information, appeared greyed out. To exit the program and abort, I have to use Windows Task manager, which then tells me the program is waiting for a response from me - but there is no menu or screen I can find of this nature. I have to force closure with Task Manager.
View 6 Replies
View Related
Mar 5, 2012
I am using AUTOCAD LT 2012 on Apple computer with Parallels and Windows 7 - 64 bit.Use LT in Windows program. Â Use Classic screen as I am still learning 2012 version.
When I select the QuickCalc button on the top ribbon - the screen freezes/locks up.Have to reboot to get out of file and recover the file. Â This has now happened twice.
View 2 Replies
View Related
Aug 8, 2013
I'm running Revit 2013 on Parallels 8 (Windows 7 x64bit) on a Macbook Pro, it has been working fine for over a year untill today as it freezes on the startup splash screen and the 'SECSplashwnd' becomes non-responsive. Nothing significant has been changed as it was working fine 8 hours ago.
I have tried repairing the Revit installation, restarting windows and mac, uninstalling Microsoft Framework and reinstalling. Problem Details:
Â
Description:A problem caused this program to stop interacting with Windows.
View 4 Replies
View Related
Jul 30, 2013
Every time I click on an option in Photoshop CC, the menu button freezes on-screen. I will attach some images to better illustrate the problem. This is my screen after opening and closing a file. The respective part of the menu stays frozen on screen:
Â
After clicking on a plugin button under the "Filter" menu:
Â
It happens every time on any button. The only way to clear the screen -ahem, the only way that I know of- is through the screen resolution panel. I just have to switch to a different resolution back and forth and it works. The thing is, this bug will come back as soon as I use the menu, which is, well, very often since I rely heavily on some plugins or actions with no shortcuts.
Â
I have Windows 7 64 bit, an ATI Radeon HD 6500M video card and a Wacom Bamboo Tablet.
View 2 Replies
View Related
May 16, 2013
I use Photshop Elements 11. When I save a file in Editor mode after amending the photo, the screen freezes and I have to reboot the software.
View 2 Replies
View Related
Jul 9, 2013
I've just purchased a new HP P6-2469ea - uk desktop pc running Windows 8. There appears to be some compatibility problems with Elements 10. Other programs: iTunes. Office and the reinstalled apps etc are fine but when elements 10 is loaded the CPU usage rockets to sometimes over 90% and consistanty remains at 25% when just sat in organizer. This results in the cursor stuttering and on occasion the screen freezes and sometimes dropping out completely. HP believe it is a compatibility problem. Same program combinations work fine on Windows Vista (64bit) and a macbook pro with Apple's current operating system.
View 1 Replies
View Related
Nov 11, 2013
When rendering a Video, first AE is ultra-slow, then the Screen starts to flicker, then several AE Icons appear in the Taskbar and than it freezes...Â
Â
System: Windows 8 on Intel i7 3930 with 32GB Ram, 2TB SSD and AMD Radeon HD 7970m... latest drivers installed...
View 4 Replies
View Related
Mar 14, 2014
When I click on the PS 10 the organizer rectangle comes up, but, when I click it the blue screen freezes at the initializing model point and won't go to the list of albums. But, if I click on the Edit, instead, the blue screen goes to the full page with its fix tools. If I click on show items in the bin the whole list of usable albums comes up. I have run every fix and scan I can think of. Premier elements does the same, but, CS6 is fine.
View 3 Replies
View Related
Feb 14, 2013
When slideshow selected from organiser first slide is displayed then screen freezes. Windows 7 64 bit
View 1 Replies
View Related