Photoshop Elements :: Screen Freezes In Editor Mode?
May 16, 2013I use Photshop Elements 11. When I save a file in Editor mode after amending the photo, the screen freezes and I have to reboot the software.
View 2 RepliesI use Photshop Elements 11. When I save a file in Editor mode after amending the photo, the screen freezes and I have to reboot the software.
View 2 RepliesIs this possible to turn on full screen mode in Photoshop Elements 11 Editor on Mac computers? If yes...how?
View 8 Replies View RelatedI am trying to stack a number of TIFF images. When I start the process, I cannot minimise the window or hot key into any other. I can get to other processes via the Start button but once up, they stay up unless I load something else on top of them. Left to itself, it can stay like this for several hours. It has got worse over time and the function has become unusable.I am using Photoshop CS5 64 bit. The computer runs Windows 7 64 bit SP1.
Intel Core i7 860 2.8 GHZ Processor
16 GB RAM
ATI Radeon HD 5450
Task Manager says I am using 12% CPU and 28% RAM..The status alternates between 'running' and 'not responding'..I am not running any other applications.I am thinking that I do not have Photoshop set up properly.
I have installed Elements 11 and it worked OK for about 3 days. When I try to open the editor now it starts to load, then freezes. My PC uses Windows 7, the program is registered & everything else works normally.
View 2 Replies View RelatedI finally can get Organizer to run by using the new short cut I created but Editor refuses to display anything other than a small gray box on the upper right side of my desktop and a border that is missing a substantial amount of pieces!
View 3 Replies View RelatedI've just purchased a new HP P6-2469ea - uk desktop pc running Windows 8. There appears to be some compatibility problems with Elements 10. Other programs: iTunes. Office and the reinstalled apps etc are fine but when elements 10 is loaded the CPU usage rockets to sometimes over 90% and consistanty remains at 25% when just sat in organizer. This results in the cursor stuttering and on occasion the screen freezes and sometimes dropping out completely. HP believe it is a compatibility problem. Same program combinations work fine on Windows Vista (64bit) and a macbook pro with Apple's current operating system.
View 1 Replies View RelatedWhen I click on the PS 10 the organizer rectangle comes up, but, when I click it the blue screen freezes at the initializing model point and won't go to the list of albums. But, if I click on the Edit, instead, the blue screen goes to the full page with its fix tools. If I click on show items in the bin the whole list of usable albums comes up. I have run every fix and scan I can think of. Premier elements does the same, but, CS6 is fine.
View 3 Replies View RelatedI am unable to print from PSE11 editor. i receive an error message stating 'photoshop cannnot print this document'. I can print standard photos from the organizer but any edits I make in editor are unable to be printed. I have checked the printer, it works fine for every other application. I have uninstalled and re-installed PSE11 but still no luck. The problem appears to have started since I installed a new printer (Epson XP). Photoshop is recognising the new printer from the print screen.
I have also tried saving my works in other formats (e.g. PDF) and saved to my desktop. I can print these but the quality is quite poor.
When slideshow selected from organiser first slide is displayed then screen freezes. Windows 7 64 bit
View 1 Replies View RelatedElements 9 - Editor won't open. No problem with organizer, but editor won't open from welcome screen or from within organizer, Checked hard drive and Organizer is listed, but Editor is nowhere to be seen.
View 1 Replies View RelatedI get this error message every time I startup the Editor. I have tried uninstalling and reinstalling the software. The same problem exits. I have tried the Control+alt+Shift when the Editor is starting up and that does not work either.
I am running this on a Windows 7 machine. I am trying to launch the Editor from the welcome screen. The editor comes up and I can see the workspace but then the error message comes up. I get the same error message when I try to launch the Editor from the Organizer.
The error message states: "A problem caused the program to stop working correctly. Windows will close the program and notify you if the solution is available"
I have LR 4 loaded on my machine and do most of my editing there. I tried to open the Editor to create a blank canvas and got this error message. I also get the error message when trying to open a photo in the editor directly from lightroom.
When I attempt to run updates for PSE 11 I get the following error message: "The update server is not responding. The server might be offline temporarily, or hte internet or firewall settings may be incorrect. Please try again alter. Error Code: u41m1c212
I cannot close my editor window /screen in elements11 as it seems to be frozen and chimes everytime I hit a key.
View 3 Replies View RelatedI reinstalled the PSE12, and when I launch it I get to the Welcome Screen. But, when I click on Photo Editor, nothing happens, no error code. (Organizer starts)
View 8 Replies View RelatedWhen I try to use edtor for a picture in iPhoto I get nothing but a gray screen. No picture will load. I select the picture in iPhote, select external editor and click on editor, Just a gray screen.
View 4 Replies View RelatedThe editor program in PSE7 does not properly recognize the screen size of my monitor. Some photos and parts of menus fall outside the viewable area to the right side. How can this be fixed? Can some setting be easily changed? Do I need to reload some part of the program?
View 9 Replies View RelatedPSE 12 was working fine until I updated to 12.1. The opening screen comes up as before when you click on the desktop shortcut. The organizer will start from the opening screen, but not the editor. I changed the option to have the program open the editor directly instead of the opening screen and now nothing appears when you click on the desktop shortcut. I am able to open both the organizer and editor by clicking on their respective exe files in the program folder. I am running Windows 8.1 / 64 on a Dell Inspiron 3847 w/ 8 GB of memory.
View 2 Replies View RelatedI'm working on a large image and while the Organizer is fine with it, neither the Editor nor the Full Screen view of the Organizer will work with it.
Currently I have MaxImageSize at 200M, but can't find a similar setting for the Editor, and clearly it doesn't work for the full screen view either, so if there is a setting that enables these functions, that would be useful information.
I have upgraded from pse9 to 11 and after selecting a photo in organiser then viewing in full screen and enlarging to 100% then exiting, organiser loses the highlight and reverts to the first photo. This also occurs when the photo is edited and saved you have to find where the editedd photo has gone to, it is time consuming when you have a large number of photos in the organiser. pse9 did not do this.Also pse11 does not sort photos properly by the shot date especially when the photos ard edited
View 1 Replies View RelatedWhen a new blank file is created at given dimensions ( say 6 x 4 inches) the actual dimensions on screen and the ruler appear approx. 1.333 times smaller than the actual size ( 4.5 x 3 inches ) .How can I correct this?
View 6 Replies View RelatedPhotoshop Elements 12 will not display photos in Organizer in full screen mode. I've uninstalled and reinstalled the application but it still doesn't work.
View 1 Replies View RelatedEach time I open a new image in ACR and then open image the editing screen reverts to QUICK mode and a smaller screen size. I then have to click to change it to EXPERT mode and then click to make it full screen. I never had this problem with PSE 10.
(I am bringing RAW images in from outside and not via Organiser.)
Is there a way to set these defaults?
I can't figure out how to adjust the size of the program screen when in Full Edit Mode. I can see portions of the Quick Fix menu and none of the Guided Fix menu. There seems to be no way to resize the window.
View 5 Replies View RelatedPhotoshop CS freezes on splash screen. I have been using this since CS first came out without problems. Now it will not go beyond the screen and locks up with 100% CPU usage. Athlon Barton 2500 w/2G Corsair Ram, 2 - 160G Seagate 7200 HD's configured with Raid +1. All other programs work normally...just PSCS
Should add that I have uninstalled CS and reinstalled it. I have also removed each 1G stick of Ram and tried it...then swaped the other stick...
Every time I click on an option in Photoshop CC, the menu button freezes on-screen. I will attach some images to better illustrate the problem. This is my screen after opening and closing a file. The respective part of the menu stays frozen on screen:
After clicking on a plugin button under the "Filter" menu:
It happens every time on any button. The only way to clear the screen -ahem, the only way that I know of- is through the screen resolution panel. I just have to switch to a different resolution back and forth and it works. The thing is, this bug will come back as soon as I use the menu, which is, well, very often since I rely heavily on some plugins or actions with no shortcuts.
I have Windows 7 64 bit, an ATI Radeon HD 6500M video card and a Wacom Bamboo Tablet.
I have just installed VSx4. I successfully made a project, and saved it, but when I go to the 'Share' stage, I cannot burn a DVD. All the steps complete, including preview, but when I click Burn the screen freezes at commencement, showing 3% complete and 'converting title'. Only the Cancel button appears active, but clicking on it yields no result. I noted that the DVD writer line on the menu, despite showing correct information, appeared greyed out. To exit the program and abort, I have to use Windows Task manager, which then tells me the program is waiting for a response from me - but there is no menu or screen I can find of this nature. I have to force closure with Task Manager.
View 6 Replies View RelatedI am using AUTOCAD LT 2012 on Apple computer with Parallels and Windows 7 - 64 bit.Use LT in Windows program. Use Classic screen as I am still learning 2012 version.
When I select the QuickCalc button on the top ribbon - the screen freezes/locks up.Have to reboot to get out of file and recover the file. This has now happened twice.
I'm running Revit 2013 on Parallels 8 (Windows 7 x64bit) on a Macbook Pro, it has been working fine for over a year untill today as it freezes on the startup splash screen and the 'SECSplashwnd' becomes non-responsive. Nothing significant has been changed as it was working fine 8 hours ago.
I have tried repairing the Revit installation, restarting windows and mac, uninstalling Microsoft Framework and reinstalling. Problem Details:
Description:A problem caused this program to stop interacting with Windows.
Just started a pen tool exercise in illustrator, at some point while using the pen tool I don't know why or how it happens but my screen stops "updating", "refreshing" or "drawing" while I drag it with the hand tool. What I mean is that if I start dragging with the hand, the rulers move as normal, but anything inside just stays a still picture and only when I release the mouse button is the screen changed to where I have dragged. Although the very edges of the artboard/workspace near the rulers behave normaly, I can see bits and pieces flying past there, but it's like there's this big square at the center of my screen that is a still image.
The problem is only inside Illustrator, the rest of my computer and screen behave normally.
I am using Windows XP SP 3, all updates 'n' stuff.
When rendering a Video, first AE is ultra-slow, then the Screen starts to flicker, then several AE Icons appear in the Taskbar and than it freezes...
System: Windows 8 on Intel i7 3930 with 32GB Ram, 2TB SSD and AMD Radeon HD 7970m... latest drivers installed...
When I open a file or create e new file in CS5.1, it fills the screen. In CS3, at the bottom of the tool bar, is a tool "screen mode" that lets me open a file that doesn't fill the screen so that I can put two or more small files (images) on a new blank file. I have not been able to do that in CS5. I do not know how to show two (or more) files at one time in CS5.1.
View 1 Replies View RelatedI have recently upgraded from CS3 to CS4 and have a slight problem with standard screen mode.
When I open an image in standard screen mode the image does not fill the screen and the amount of screen the image fills depends on the percentage magnification.
I have to drag the image with the cursor to fill the screen.
When I open a new image the same thing happens, it reverts back to partially filling the screen.
This only occurs in standard screen mode, the other two modes seem to be ok.
I have a mac pro, os 10.5.5, 8gb ram