Photoshop Elements :: Activation Fails After Camera Raw Update
Dec 14, 2012
I updated Camera Raw today (12-14-12) through the Adobe Software Updater. Now when I start PSE 11, I get a message that the software has exceeded its activation limit.
I rebooted the computer, and the same problem re-occurred. Upon startup, PSE 11 pops up a message that the software activation limit has been exceeded.
Let me be clear, I bought the application from Adobe, I have a valid license that was delivered from Adobe via email, the software has only ever been installed once, on this machine.
View 1 Replies
ADVERTISEMENT
Aug 24, 2012
Installing OEM software with a new printer update camera raw fails.
View 6 Replies
View Related
Jun 15, 2012
i'm using Photoshop CS6 with Camera Raw 7.0. I have a D800 (which is why I purchased CS6) and attempted to update to CR7.1 I get the following error:
Photoshop Camera Raw 7.1
Update is not applicable. Error Code: U44M1P28
I've cleared my prefs, tried the standalone installer, rebooted, all to no avail.
Here is my system info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Mac OS 10.7.2
System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3400 MHz
Built-in memory: 16384 MB
Free memory: 10271 MB
Memory available to Photoshop: 15083 MB
[code].....
View 3 Replies
View Related
May 11, 2013
my PSE11 was working fine until i bought a new camera and tried to upload photos from my RAW files. It gave me this message
"Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.Please visit the Camera Raw documentation for additional information."
so i tried to install the update.... installed it fine, kept getting the same message when i would try to open the photo. after researching online i found the suggestion of uninstalling and reinstalling photoshop elements. i did that once, tried the update again...same results. uninstalled again. tried the update again and still getting the same message. ive checked the adobe website and everywhere i look says the version of the camera raw DOES support my camera (nikon D7100).
View 10 Replies
View Related
Dec 16, 2012
After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
View 2 Replies
View Related
Feb 26, 2013
It said there were updates in PSE 10 (help/updates) for Application Manager and Camera Raw. I let it install both, I rebooted, and the ACR says 6.7 and not 7.3. It will not read my Canon 6D RAW files. When I check help/updates again, it says everything is up to date.
View 3 Replies
View Related
Aug 31, 2013
How does one update pse 10 to use camera raw 7.3?
View 1 Replies
View Related
Jan 14, 2013
Apologies if this has been dealt with before but a quick search hasn't revealed anything. Downloaded Elements 10 Editor from the Apple App Store and have been using it without problems.
Have just updated my EOS5 to an EOS5D Mk.III, downloaded the latest RAW Plug-in but I keep getting an error message saying this update is "not for me". The work around is to covert files to dng and then open but this creates lots more files. So in a nutshell how do I update the RAW converter?
View 1 Replies
View Related
Dec 21, 2013
I have PSE 11 and have turned off my firewalls and still cannot get a Camera Raw update newer than 7.1. I have a d600 and it wont work through that. I know it can be done since I wasnt having this problem before I had to restore my computer and reload my software. I have searched Adobe up and down and everything says to us Help>updates...but its not giving me the option to update.
View 7 Replies
View Related
Aug 12, 2013
Bought a new camera:Sony Cybershot DSC RX100. My version of Elements 10 does not recognise the RAW format of this camera, so I tried to install te latest Camera Raw update (6.5) for Elements !0. Everything goes well untill Itry to activate the Update Installer. I get a message: Failure: U44M2P7 Updating using the Help function does not work because there is a message that everything has been updated.
View 2 Replies
View Related
Sep 22, 2012
I can't update cameram raw 6.7 on Win7,64 bit
View 1 Replies
View Related
Jul 1, 2013
having some major problems, just bought a D800, upgraded my pc with a 64 bit os and more ram, re-installed all my programs and cant open my files in PSE, its saying its the wrong files type, go to update pse10 and im getting an error cose u41m1c212, have downloaded a dng converter and trying to download acr 6.7.1 .
View 2 Replies
View Related
Jun 26, 2013
New Trial user and unable to import Raw file and unable to download camera raw plug-in.
View 21 Replies
View Related
Mar 11, 2014
I am trying to adjust the white balance using photoshop elements 11, all the information I have come across tells you how to do it using the camera raw plug in. This has been updated and still I do not see it listed when I click on the file menu. I take photos of antique gold lockets using a light house and even though the custom white balance is set on my camera the photos are still coming out too canary yellow. I need to be able to adjust the colors so that they are more antique rose gold looking and have been reading different articles and videos on how other people adjust the colors and would like to try a couple of the ways I have seen but am unable as the camera raw plug in is not showing up as an option.
View 1 Replies
View Related
Sep 2, 2002
The Photoshop 7.0.1 update fails when I try to run it on Windows XP Pro. I have reproduced this error two times, once on a fresh installation of Photoshop 7. I receive a ComponentMoveData Error: Media Name: data Component: FileGroup: File: .
View 19 Replies
View Related
Sep 21, 2013
When transfering images from Lightroom to Photoshop HDR for instance. message says update Camera Raw. Update attempts all come back to 'update server is not in service' --
View 1 Replies
View Related
Oct 3, 2013
I had an alert to update Photoshop but after three attempts it reaches 56% then fails. It is accompanied by a message to contact customer care and gives the number: U44MIP34. I have retried after a restart but with same result. Then I tried again after running AVG registry cleaner equally without success. Could it be a time difference between US and UK?
View 1 Replies
View Related
Oct 8, 2008
I get a message on my computer that there's an update to install, but when I attempt to install it, it goes through the motions of installing itself, then says it couldn't install itself and that I have to reinstall the original product so that it can install itself. I'm very reluctant to go through the whole installation process all over again, so I'm curious if there's any other way to get these updates. This is a registered product by the way, in my name.
View 1 Replies
View Related
Jun 18, 2013
i get the green progress bar.. then suddenly a error message "can not install application manager".of course no further explanation... tried a few times.we use CS6 with a volume license at work.
View 7 Replies
View Related
Dec 11, 2012
this has been only happening since updating this morning from 13.0.1 - 13.0.2...I have a problem where if I create a new curve layer and then press the preview button on/off it fails to re render the preview and nothing else happens until I OK it. I also notice that it creates history entries on the history panel like I'm making adjustments? Weird!
There's been a few other noticeable things too. The liquify window now doesn't draw as nice and smoothly as it did with 13.0.1. The cursor jitters a lot and control isn't as smooth.
View 2 Replies
View Related
Mar 20, 2014
I have just updated Illustrator CC to v17.1 and now it will no longer launch.There is a bouncing icon in the dock for about a second and then no activity, no warnings or errors.My mac is quite old (MacPro5.1 Quad-core running osx 10.6.8) which may well be the problem.Never the less Illustrator 17.0 ran perfectly well prior to the update.
Uninstalling Illustrator 17.1 and reinstalling v17.0 works.If Illustrator is allowed to update as recommended it no longer launches.Is there something in the update that prevents my older spec mac from running it?
View 2 Replies
View Related
Oct 29, 2013
I have tried installing this update and it gets to 99% then fails.....
View 4 Replies
View Related
Jun 6, 2011
When I place an Inventor 2012 part into an AutoCAD 2012 layout, the drawing view fails to update after a change is made to the Inventor file. When I click "Update View" in AutoCAD the command line says, "1 view(s) is up to date.", but the drawing does not change. Both the AutoCAD drawing and the Inventor part file are located on a server drive which is mapped as a network drive. AutoCAD displays the correct path in the drawing view properties. Running Windows 7 x64.
View 3 Replies
View Related
Jan 2, 2014
Just started a pen tool exercise in illustrator, at some point while using the pen tool I don't know why or how it happens but my screen stops "updating", "refreshing" or "drawing" while I drag it with the hand tool. What I mean is that if I start dragging with the hand, the rulers move as normal, but anything inside just stays a still picture and only when I release the mouse button is the screen changed to where I have dragged. Although the very edges of the artboard/workspace near the rulers behave normaly, I can see bits and pieces flying past there, but it's like there's this big square at the center of my screen that is a still image.
The problem is only inside Illustrator, the rest of my computer and screen behave normally.
I am using Windows XP SP 3, all updates 'n' stuff.
View 4 Replies
View Related
Mar 5, 2012
I updated a working cad station with the lastest pathes. It loaded the new MS Dot Net framework 4. Now Acad crashes if you open it, see below. If you click on an existing drawing it opens and you can work with no problems.
My question is - Is Acad 2011 compatable with the new DotNet 4? The fault module below is DotNet. The old drawings were created using 3.51 DotNet so it looks to me it tries to use the dot net 4 on new drawing.
Problem signature:
Problem Event Name: APPCRASH
Application Name: acad.exe
Application Version: 24.1.208.0
Application Timestamp: 4dbf9c16
[code]...
View 9 Replies
View Related
Nov 5, 2012
Parts generated with the FG can be changed with the 'Change' option within the Frame Generator menu in the Design -tab on the ribbon.
However, when I change the size of the profile thru this menu all properties will be changed according to the settings of the table in the Content Center, except the Description property.
The Description column in the table is configured with the size of the profile and is mapped to 'project.description'.
I'm using Inventor 2013 SP1.1
View 8 Replies
View Related
Oct 8, 2013
Purchased PSE 9 via ebay. Arrived OK complete package. Installed with no problems, but today it came up with "Activation Limit reached".
View 5 Replies
View Related
Dec 26, 2012
I want to activate my Adobe Photoshop Elements 10 on my new computer. However, I cannot deactivate it on my old computer first, since that computer is broken (I know I can activate it on two computers, but that second activation is already taken by my other computer). What can I do to activate my Adobe Photoshop Elements 10 on my new computer?
View 1 Replies
View Related
Nov 3, 2013
I have Photoshop CS6 installed. I want to use my new camara Canon 6D , and I can`t open the raw files: How do I update camara raw?
View 1 Replies
View Related
Oct 3, 2012
most of our company computers are offline.so how do we get the new camera raw 7.2 update?
until now they were always released as manual downloads.... now i have to read this from adobes blog:
Camera Raw 7.2 – Please use the update mechanism in Photoshop CS6
[URL]
does that mean there will be no manual update anymore or is it not up yet?
View 34 Replies
View Related
Jun 3, 2013
How to update to Camera Raw 7.4 /how to do this ...
View 2 Replies
View Related
