AutoCAD Civil 3D :: 2012 SP2 - Fails To Export To 2010?
Aug 13, 2012
I never saw it prior to installing SP2 on 2012... (currently downloading SP2.1 to see if it fixes the issue...)
I have two viewports on the same sheet, one at 1"=30', and one at 1"=100'. Cogo Point symbols/labels will print correctly on one viewport, but not on the other. It seems to be related to whichever one I went into last. If I go into the main viewport at 1"=30', then the Cogo Point labels/symbols in the 1"=100' viewport turn very tiny when issuing "Export to Autocad 2010". If I go into the 1"=100' viewport last, then the Cogo Point labels/symbols in the other viewport blow up into huge gigantic things.
I've NEVER seen this behavior before. It's getting incredibly frustrating, since our client requires a plain AutoCAD 2010 drawing, and the Export feature is flat-out not working anymore. And if I try exploding Cogo Points prior to exporting, then they disappear from the Point Table.
I have repeatedly attempted to export a simple drawing as a PDF and it doesn't take. I get an error message that the plot failed because there is nothing to plot (paraphrased).
Does export as a PDF not work or not in the Student version or?
I am using a fairly old Lisp to generate section arrows, started using this in 2000 and up until 2011. Since we have installed 2012 the routine does not work correctly, after inserting block with attributes instead of bringing up dialogue box it inserts next line of string in to the dialogue box. I have attached lisp routine and blocks
I'm a school teacher in the PLTW program that uses Inventor extensively in my classroom. Our district operates under a 125 seat license. The issue I've run into is on my personal computer (Windows Vista, x64) and is therefore outside the realm of the usual IT guy's duties. The Inventor software was installed on my laptop by the PLTW training staff during my summer session. I *think* it is a stand alone install of the program.
What happens is after I launch Autodesk Inventor, I can see the splash screen, and the inventor.exe task appears in the task manager, however after a few seconds, the splash screen disappears and the program does not launch. There is no error message.
This is confusing since until quite recently I am sure that Inventor was working hunky dory. Also, all the other Autodesk programs seems to function normally (Fusion, Design and Review)
I've tried a repair and reinstall, but the problem still persists. Also, I updated the install with SP 1, but this had no effect either.
I have recently updated my display drivers (ATI Radeon), however, I tried reverting back to the older drivers and still the problem persists, so I don't think it is graphics driver related
We installed ACA 2012 a few weeks ago on computers running Windows Vista Business 64-bit. On one of our machines, the Detail Component Manager was working fine and now when we go to insert an object the insertion fails with a *cancel* appearing on the command line.
I have checked all of the file paths and folder permissions and everything is fine. Microsoft.Net Framework 4 Client & Extended is installed as along with Microsoft.Net Framework 3.5 SP1.
I installed inventor 2014 on my laptop with windows 8.1, and export to DWG does not work. When i go to export, the options button doesnt work. when i click save, it pops up a windows and says "Problems encountered while saving the document." On my desktop with 2014 it works perfectly. I have the newest sp1.
Static network, static IP address on fixed machine. Stable install been used every day for over 2 years. Come in this morning and backburner server fails to launch. Network functional as usual, checked all the usual culprits and no joy. Reinstalling SP4 now to see if that repairs links.
I'm using the exporttoautocad command to convert a 3D drawing with a proposed surface (a TIN object) into a drawing with just contours (polylines with elevations). My original drawing is in feet and has a NAD83 state plane coordinate system.
Everything seems great in the exported dwg, except it is converting the elevation units from feet to inches!? A contour that was originally at an elevation of 7.0 feet, ends up at 7 inches in the exported drawing. Spatial coordinates are preserved.
Lightroom fails to export to jpg most of the time. The application creates the desired subfolder, and displays a progress bar, but does not create the file.
Am publishing dwgs / saving as .pdfs / Preview looks good, but when I plot, one line of text appears as series of dots and the error msg from Adobe is close to "Cannot find ArialMT font, some text may not format or print correctly...."
My co-workers have no problem publishing these same dwgs from their workstations, however. Also, there are several text objects / boxes in the dwg, and they all print fine 'except' for the one.
Restarting etc., doesn't make any difference. Neither does plotting in Preview or Draft and so on.
When I place an Inventor 2012 part into an AutoCAD 2012 layout, the drawing view fails to update after a change is made to the Inventor file. When I click "Update View" in AutoCAD the command line says, "1 view(s) is up to date.", but the drawing does not change. Both the AutoCAD drawing and the Inventor part file are located on a server drive which is mapped as a network drive. AutoCAD displays the correct path in the drawing view properties. Running Windows 7 x64.
I updated a working cad station with the lastest pathes. It loaded the new MS Dot Net framework 4. Now Acad crashes if you open it, see below. If you click on an existing drawing it opens and you can work with no problems.
My question is - Is Acad 2011 compatable with the new DotNet 4? The fault module below is DotNet. The old drawings were created using 3.51 DotNet so it looks to me it tries to use the dot net 4 on new drawing.
Problem signature: Problem Event Name: APPCRASH Application Name: acad.exe Application Version: 24.1.208.0 Application Timestamp: 4dbf9c16 [code]...
Autocad failes when i tried to directly opening a file from recieved attachment email. whereas it opens it properly when i save the files to hard disk drive.
if you download and install with only WI-FI on. you get one MAC adress... then if you connect your macbookpro with a Thunderbolt->Ethernet adapter, you want this to be first in the list for fastest connection. Then Smoke will not export (backburner fails)
If you remove the adapter so that Wi-fi is the only one. Well then everything works...
Everything was working fine and then this morning everytime I export my edited photos, it just exports the orginal and not the edits. I also noticed the watermark check box is grayed out, so I can't check it.
When using LR 4.3 and 4.4 on Windows 8 Pro x64 and trying to export a jpeg file with the file size as the limit I get the error "Some export operations were not performed. The file could not be written <<NameOfRAWFile>>"
This is only occuring with exporting files where the File Settings is set to Limit File Size to: <<zzzz>>K.I use 5000 as the default due to the limits of the site I am uploading too.
Trying to the base view system in acad 2012. Got inventor model and want to document in acad. New blank layout tab. Select base view and as model space is empty it asks for inventor file as it should. I select my ipt file.
it then says 'invalid autodesk inventor file C:projects......'
the command then closes.
I created brand new part, plain cube, and still the same.
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2 'Draw a line Dim PT1(2) As Double [code].....
I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990 250GB HD 8GB Ram I7-2600 proc AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
I need to import .dgn elevation data (DEM?) into Civil 3D. When I attempt MAPIMPORT, DGNIMPORT, DGNATTACH, or from the "Insert" ribbon selecting "Import" and .dgn as the file type, Civil 3D will not respond and has to be closed and reopened.
The information likely includes surface and/or breakline information. Please see the attached (change file format from .txt to .dgn).
And if Civil 3D 2013 simply cannot import this information, does the Infrastructure Design Suite/Civil3D 2014 can?
ORacle spatial connected via FDO. Oracle Table uses a user defined SRS. Drawing entities (CAD) in DWG file. command: mapexportfdo
If no CS is assigned in Map 3D, the export of the autocad entities works ok, the result geometries are written with the correct (table/metadata) SRID.
If a CS in MAP3D is assigned (for example as a result when using a WMS from a public server), the export fails.
It seems that MAP3D is trying to "translate" the CR to SRID somehow and it fails if these are different. As this is a "plain CAD" to GIS export, I expect MAP3D to behave like:
Either it just works as in the first step (write geometries) and pick the SRID from the metadata, without applying any transformation.
Or it applies a transformation if feasible ONLY when I the user checks the thick box: Convert Coordinate to (in the options tab on the Export dialog box.
In my case I do not want to transform, I just need the geomes being exported into the target table. So far I have only managed to do so when both drawing cr and oracle SRID are "MAP3D technically equal" (based on a similar EPSG code)
Specifically, because MAP3D does not recognize the user defined SRID in ORacle, obviously it is up to the user to know what to do with the data.
NOTE1: "export fails" is the only message as a user I get from the software, not knowing what is going on. I had to drill down this issue by trial and error, great error messaging (or better refusing message).
NOTE2: Export via another file format is NO option! I need a direct export (as it always worked, also when creating features from geometry). This time I need to exportway.
The AutoCAD C3D fails to apply the precision for all elevations in one go!I wanted to let the precision to be zero for all the contour lines in ONE go but sound not to work!Only the picked elevation responds to the selected precisions, the others are not affected!
Attached is a dwg file that refuses to complete the surface triangulation. Can some try this? The maximum triangle length is set to off. I'm out of guesses. If I move the furthest point around it will complete the surface but just not in it's current location. Point number 69
I am using Lightroom 5 also to color grade some of my short videos as it seems to be pretty handy. Unfortunately, for some videos the export fails with the error that the hard drive does not contain rendered images. The screenshot below shows the error message in German.
As I was using the same options for many other videos before, I was wondering what causes this error. The hard drive where I have the lightroom catelog is an external USB3 hdd with lots of space left.
I'm trying to adjust the properties of some block objects in Mspace. When the file contains external references the function fails, when it has none it works perfectly.
Dim modelSpace As BlockTableRecord = DirectCast(M_trans.GetObject(SymbolUtilityServices.GetBlockModelSpaceId(db), OpenMode.ForRead), BlockTableRecord) For Each id As ObjectId In modelSpace Dim ent As Autodesk.AutoCAD.DatabaseServices.Entity = DirectCast(M_trans.GetObject(id, OpenMode.ForWrite), Autodesk.AutoCAD.DatabaseServices.Entity) ent.Color = Color.FromColorIndex(ColorMethod.ByLayer, 256)
Using the above to get all objectid's and filter through them then using:
If TypeOf ent Is BlockReference Then Dim br As BlockReference = DirectCast(ent, BlockReference) Dim btr As BlockTableRecord = DirectCast(M_trans.GetObject(br.BlockTableRecord, OpenMode.ForRead), BlockTableRecord) If Not btr.IsFromExternalReference Then
I'm having an issue with exporting an Inventor 2012 .idw to AutoCAD DWG.I am trying to export a multi-sheet drawing to AutoCAD 2007 using the Model Space - Full Scale option.
IT seems like no matter what I try, it will only export the geometry from the first sheet. It creates the other 2 .dwg files (Sheet 2 and 3) but they are empty. The drawing set is comprised of a large plan view on sheet 1 and then a bunch of section views, originally cut on sheet 1 and then moved to the other sheets.
I tried using the other options "Sheet Scale - Model Space" which left me with some odd scale factor on the section views (completely different from the scale on the drawing) so, I can't use that.And "Base View Scale - Model Space" or "Layout" give me the same result as the 1:1 scale option... all 3 files, but 2 and 3 are empty.I tried .dxf and other AutoCAD versions with no change.
I'm using Ineventor 2012 to export files ive made to cut them out on a CNC i recently bought. Ive been having problems with the CAM software im suing to genrate toolpaths (MeshCAM) making the part smaller than it actually is, so i made a 1"x1"x1" cude and imported it to MeshCAM, it imported the demensions 2.54x2.54x2.54 Why is invortor exporting the stl in metric not english units?
