Everything was working fine and then this morning everytime I export my edited photos, it just exports the orginal and not the edits. I also noticed the watermark check box is grayed out, so I can't check it.
View 1 RepliesLightroom fails to export to jpg most of the time. The application creates the desired subfolder, and displays a progress bar, but does not create the file.
View 11 Replies View RelatedWhen using LR 4.3 and 4.4 on Windows 8 Pro x64 and trying to export a jpeg file with the file size as the limit I get the error "Some export operations were not performed. The file could not be written <<NameOfRAWFile>>"
This is only occuring with exporting files where the File Settings is set to Limit File Size to: <<zzzz>>K.I use 5000 as the default due to the limits of the site I am uploading too.
Fails on my laptop and my desktop.
Does LR 5.3 support video card NVIDIA GeForce 7300 GT (MacPro Quad (2007 vintage) running 10.7.5)?
View 1 Replies View RelatedI am using Lightroom 5 also to color grade some of my short videos as it seems to be pretty handy. Unfortunately, for some videos the export fails with the error that the hard drive does not contain rendered images. The screenshot below shows the error message in German.
As I was using the same options for many other videos before, I was wondering what causes this error. The hard drive where I have the lightroom catelog is an external USB3 hdd with lots of space left.
I was advised to download photoshop via adobe application manager as I have an XP OS. I even downloaded the application manager but now it fails to install saying "remote server not properly placed.Try after a few minutes" Whenever I retry I get the same message. Even I am getting the same message in case of installing adobe flash player. The installer always says installation not complete.
View 1 Replies View RelatedAdobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What I do.
I have uninsalled, ran the cleaner, installed, and Bridge will not open, Application manager will not run.
Win 7 x64 Pro
CS6
I recently upgraded to PSE11 but the installation did not create the service Adobe Active File Monitor V11. I followed the forum thread [URL] .... to completely uninstall, remove residual files, reinstall from DVD. Still the service DOES NOT EXIST.
I followed the Elements Village thread on "Watched Folders Issues" to manually create the service. But when I attempt to start it, I get an error that says "Error 1053 The service did not respond to the start of control request in a timely manner."
I'm using WinXP Media Center Ed. SP3.
I installed inventor 2014 on my laptop with windows 8.1, and export to DWG does not work. When i go to export, the options button doesnt work. when i click save, it pops up a windows and says "Problems encountered while saving the document." On my desktop with 2014 it works perfectly. I have the newest sp1.
View 8 Replies View Relatedif you download and install with only WI-FI on. you get one MAC adress... then if you connect your macbookpro with a Thunderbolt->Ethernet adapter, you want this to be first in the list for fastest connection. Then Smoke will not export (backburner fails)
If you remove the adapter so that Wi-fi is the only one. Well then everything works...
I never saw it prior to installing SP2 on 2012... (currently downloading SP2.1 to see if it fixes the issue...)
I have two viewports on the same sheet, one at 1"=30', and one at 1"=100'. Cogo Point symbols/labels will print correctly on one viewport, but not on the other. It seems to be related to whichever one I went into last. If I go into the main viewport at 1"=30', then the Cogo Point labels/symbols in the 1"=100' viewport turn very tiny when issuing "Export to Autocad 2010". If I go into the 1"=100' viewport last, then the Cogo Point labels/symbols in the other viewport blow up into huge gigantic things.
I've NEVER seen this behavior before. It's getting incredibly frustrating, since our client requires a plain AutoCAD 2010 drawing, and the Export feature is flat-out not working anymore. And if I try exploding Cogo Points prior to exporting, then they disappear from the Point Table.
I have repeatedly attempted to export a simple drawing as a PDF and it doesn't take. I get an error message that the plot failed because there is nothing to plot (paraphrased).
Does export as a PDF not work or not in the Student version or?
I have a finished JPG and I am trying to re-create the settings I used in another image. Unfortunately, I didn't save the settings in a preset. Is there a way I can have Lightroom compare the original RAW/JPG with the final JPG and extract settings from that?
View 6 Replies View RelatedWith the Adobe CC upon us, I'm am questioning staying with Adobe proprietary DNG (proprietary in the fact it has edits embedded that only Adobe products understand) and PSD files long term.
I have never used Lightroom. But am a heavy Photoshop/ACR user. I have many ACR edited DNG files and multi-layered Photoshop files.I want access to my files in the future (including edits) without having to always have the monthly CC subscription (in the future).
Question: Can Lightroom (not a CC product currrently and hopefully not in the future) open & understand the edits (cropping, color balance, lens correction, ...) I've already done to my many DNG files in Adobe Camera Raw?
Even if I use the CC in the near future and eventually not subscribe, I want future access to my DNG and PSD format files, including all the edits).if Adobe guaranteed a free PSD & DNG viewer (understand the layers, edits, ...) and give the ability (for all time) to export to a flattened image with edits applied to TIFF!
After high lighting several photos, clik on rotate ( see there is no load on the CPU only a very small one in the middle) only the highlighted photo will rotate NONE of the others will not even over time do they respond. same in Libary mode as well
NOTE - why is "auto sync" showing as an option in libary mode?... is that not only availible in Develop mode? after i reset ( see below on the update) sync meta data is NOW shown as the option...
There are not the little 3 dots on the selected photos, showing that it is "working on the edits"
I cleared raw cache, reset all develop presets, restored all local adjustment presets, changed Catalog settings to preview quality to medum ( down from high) Previews size unchanged at 1440 pixels
lr4.2 clean new install, upgraded to lr4.3rc, upgraded to lightroom 4.3 all versions were 64bit.
I edit my images for the most part in LR4 then export as a raw file into a new folder. Then when I view the images in bridge my edits don't show up. Do I have to convert to JPEG for my edits to stick?
View 3 Replies View RelatedI use Lightroom 4 and when I went in to look at some images I had recently edited, (all my images are large jpegs, and I "add" my photos to LR) they all started to change to some weird high contrast edit right before my eyes, one by one without me touching or changing anything. They also had a little exclamation point on them. When I clicked on the exclamation it says "the metadata was changed by Lightroom and another application" and I could "import settings from the disk or overwrite the disk settings." When I clicked import settings it reverted back to my original edit. But this didn't last.. after a few minutes they kept changing back to this other random edit.
I read online that I should save the metadata so it can't be changed, so I highlighted every image I have in Lightroom and saved the metadata. (this took about an hour for Lightroom to do) But now when I go back into Lightroom to look at my photos they do something different.. now they start to revert back to the original UNEDITED files all my themselves, one by one! I have already exported all the edited photos into folders so I have them. But what do I do!? If I ever want to go back to an edited photo and export it at a different size or retouch it or something, none of the edits are saved, I have to start from scratch! I'm a wedding photographer and I'm scared to load more images and work on them just for LR to change them back
Love the new basic editing sliders. But, finding when I "edit in > PS > edit with LR adjustments", the image in PS is NOT the same as in LR. It's "darker", the histogram isn't transferring properly.
View 3 Replies View RelatedI went to pull an image for a vendor. I added a few to the quick collection. Fine right? Now when I look through the master files in the hierarchy, ALL of the edits are lost, including color labels, starring, flagging, etc. The only images that were not affected are any duplicates that I converted to black and white.I swear I did not change a thing with the catalog or moving files on disk etc. Can I import from an older backup of a catalog to restore my edits?
View 3 Replies View RelatedWhen I edit in Photoshop CS6, then SAVE, then CLOSE, it isn't in lightroom, stacked or un-stacked. I've reinstalled both LR4, PS-CS6, and ACR.
I can eventually track them dow, they are in the folder, but I have to import them before I see them!
It doesn't matter if I process as TIFF or PSD.
Last night I made some adjustments to a shoot which I did using Lightroom presets. I synced the rest of the images so they were all the same before opening them from Lightroom into Photoshop for further editting. I unfortunately removed all the images from Lightroom but I still have the psd files which were opened in Photoshop. Unfortunately i discovered this morning that I have missed a couple of images and try as I might I have been unable to replicate the same use of presets I used last night. Is there anyway for me to tell from the psd files what presets I used so I can edit the ones I missed in the same way?
View 1 Replies View RelatedI have the plugins for Nik HDR Pro in my Lightroom 4 on my Mac (OS X 10.6). When I save the file with the changes and return to Lightoom, the changes I made are not there. I have had the same problem with a filter on my Olympus E5 which emulates an HDR effect - the effects are not visible when downloaded to Lightroom.
View 3 Replies View RelatedI have been doing many edits in LR5 and I am losing something along the way...this is what I have been doing....
The image is edited in LR5 (exposure,blacks,whites etc) The image is edited in Photoshop (spot heal)...(copy with lightroom edits) Edits made in Photoshop are saved back to lightroom (not sure saving method here?) Final product is exported from LR5 to email (sRGB /JPEG)
The blacks in the image look VERY different once emailed from the Mac Computer. When viewing on the IPAD, Laptop, Mobile devices these images dont look exactly the same prior to being sent via email.
I notice a rather strange behaviour in Lightroom 4.3 in the Develop module: it appears that the Develop preview ("zoom to fit" setting, I guess that's what 99% of people are using when using the global adjustments) is only updated when moving the mouse pointer AWAY from the slider that controls the adjustment (it doesn't matter if it's Clarity, or Highlights, Shadows, whatever).
I happen to often click somewhere on the sliders range, say somewhere in the middle between 0 and +100, to get an idea what a Clarity ~50 might look like. If I keep the mouse pointer hovering over the knob, the Develop preview will look pixelized/blocky, and not update to a more refined preview.
Only if I move the mouse pointer AWAY, the preview will be updated. It's as if the rendering is delayed until you're really sure you want that setting, perhaps to improve responsiveness/performance? This didn't happen in LR 4.2.
I tried this with a NEW catalog and only imported something like 100 photos to it, and no plugins - the behavior stays the same. I uninstalled the latest AMD/Catalyst graphics driver and let Windows 7 (64bit) "fall back" to a default driver - again, behavior stays the same.
Did a bunch of edits to some photos in a particlular folder. Went to another folder and did the same. When I went back to the original folder, all the last edits I did were gone.
And, LR5 Develop Module is way slower than 4.
Recently upgraded to Lightroom 5. Now when I publish photos, those photos are the originals, without any of the edits that were made in Develop (such as crop, color, etc.). The tags are being published and updated, but that's all. This is happening for both publish to hard drive as well as online services.
View 2 Replies View RelatedI have two big issues with syncing edits between my iMac (computer A) and Macbook Pro (computer B). My workflow has been as follows:
Import photo shoot onto computer A as DNG into master catalog. Do some edits. Export all DNGs as "Original" from shoot to desktop and copy over to computer B. Import shoot folder in master catalog on computer B, edits are held. Finish editing the entire shoot on B and export folder as a catalog without exporting the DNG files. Back on computer A, import to shoot folder from another catalog to sync edits and metadata changes.
My issues:
1. When edits actually do sync back on A, everything syncs EXCEPT for virtual copies, they are no where to be found. Even when exporting from B as a catalog, the dialogue box says "79 virtual copies to be exported." They just never show up back on computer A.
2. Biggest issue. On computer A, I work in one master catalog. Some shoot folders are still on the internal hard drive while most are housed on a Drobo. It seems the reason why edits will never sync back (changes arent found when importing from another catalog) is because LR4 is only looking on the INTERNAL disk of computer A. The import seems to not look for the photos that are housed on the Drobo. I think this because whenever I try to import back to A, LR4 tries to create a new folder in the catalog on the internal disk. The below screenshot shows what I mean. 0512-SpeedyFamily is the shoot Im editing between A & B, but LR4 tries to import them back onto the internal disk (upper portion of folders) and created the ?2012 folder.
I am running LR 4.2 on both machines, just havent installed the latest update yet.
I have a folder in Lightroom 3.6 that I edited after I had already moved to LR 4. All of my actual image files are on an external hard drive. The folder of edits in question is not in my LR 4 catalog. What is the best way to move that folder with all the edits and virtual copies from 3.6 to 4 and then link the edits to the images on the external drive?
View 4 Replies View RelatedI know how to "edit in" Photoshop... but, ever since my upgrade to LR4, the file transfers un-edited. In LR3 it would transfer with the LR adjustments.
View 4 Replies View RelatedI recently copied all Lightroom folders/catalog /etc to a larger hard drive. Upon opening Lightroom for the first time since the move, almost all of the edits made in Photoshop and/or 3rd Party programs are gone and with them the ratings for those photos. Where are these photos/ratings stored and are they retrievable. Again, I copied ALL folders and catalog to the new drive.
View 4 Replies View RelatedI have a PC, I've tried to safe my NEF/RAW files with the edits and it will only save either unedited photo's or jPegs. I choose export and a file to export to. WHen I open the folder the photo's are all unedited.
View 1 Replies View Related