AutoCAD LT :: Possible To Config Content Palette
Feb 13, 2013
Recently migrated from windows to mac os and only using this version on a macbook for now until I feel confident to changeover the studio workstation after many years and trying to find some familiar ways around as I have been used to working on LT2004 (although I have upgraded many times I just never really got on with the newer pallettes etc and revert to the tried and tested version to keep productivity at work)
- Is it possible to config the content pallette so I can rotate blocks at the time of insertion without having to either post rotate them individually from the model space or use the insert command which appears not to be as graphically friendly as the content pallette which looks excellent for compiling good for libraries but the option to at least rotate.
- Is there a quick and easy to changing linetypes on the fly from a flyout menu on the toolsets... is there any other way round this without having to access the pull down from the properties inspector pallette as that method consumes quite a bit of screen space?
View 1 Replies
ADVERTISEMENT
Dec 13, 2011
We use AA in the office but we have one version of autocad straight on a laptop. How can I get a tool palette we created in AA into autocad? I understand in AA that you use the content browser in AA to export a palette group but then how do you actually get that into Autocad for use? I think autocad uses an atc file or something like that.
Also, when trying to export the tool palette in AA using the content browser, the help file said I should be able to grab the tool palette and slide/ copy it into the new cataloque I created in the content browser. However, eveytime I grab onto the tool palette, the content browser woudl disappear. I finally just selected all of the items in my tool palatte and copied/ pasted them into the category folder I created within the new catalogue.
View 1 Replies
View Related
Aug 31, 2012
I have version 6 of PSE and I cannot see my Content Palette. How do I make it reappear?
View 1 Replies
View Related
Nov 16, 2011
DWG configuration? I keep trying different configurations but none are acceptable to our quality department.
What I need is for dimensions to retain associativeness(not exploded), and for the dimensions to retain their fit (i.e. look like they do in the idw)
View 1 Replies
View Related
Jun 13, 2011
The Pagesetup isn't showing up in the Pagesetup dialog.
But when I close the drawing and open it up it's visible.
What am I missing here? Still new with this transaction concept...
<CommandMethod("aps")> _Public Sub AddPlotSetting() 'TODO: Finish Cleaning Print Function Dim s_PlotSettingsFile As String = "c: est.dwg Dim s_PageSetupName As String = "catdog" Dim s_MediaName As String = "11 x 17"
[Code]....
View 7 Replies
View Related
May 19, 2012
I want to have an application settings file stored centrally on a network drive. In the past I have used INI files, and for a Windows app would now use an app.exe.config XML file. My question is: what is the preferred technique for storing shared settings centrally for an AutoCAD .dll plug-in? It seems even for a full Windows app that the app.exe.config file can't be located on a network drive, but I could be mistaken. In any case that doesn't appear an option for a .dll plug-in. Everyone comments that INI files "are so 90s", but I can't see an alternative.
View 2 Replies
View Related
Jun 11, 2012
how to change our config and template files from old to new
View 1 Replies
View Related
Dec 5, 2012
We have a big problem on several PC's with Acad Map 3D
if the users import their old (Acad 2010 Map 3D) files where symbollists and view settings are stored.
After a restart of Acad it hangs up with following Errors (See attached).
We can solve this issue temporary with restoring the defaults.
So the problem is importing old files so i think it is not campatible with this old acad 2010 files.
Is there a way to import such old files?
View 8 Replies
View Related
Sep 15, 2011
The best way to have normal AutoCAD objects (lines, plines, arcs) adhere to the Display Configurations.
My original idea was to contain all of the 'vanilla linework' in one Multi-View Block per Construct, thereby enabling me to set the Display Properties for that MVB and have the linework show/hide depending on my Display Config. I end up having to 'edit block in-place' if I want to change anything, which seems to work but there has got to be a better way.
My only other idea was to somehow link Layer Filters (which I'm unfamiliar with, and probably using the wrong term) to the Display Configs so that depending on the current Config, certain layers would be frozen/thawed. This seems like the way to do it, but it is not obvious to me how I might be able to achieve this through the Display Manager.
View 4 Replies
View Related
Aug 20, 2012
Our office is currently running Inventor 2012, with SP2 installed (Build 219) and the program still seems unable to fully save and utilize a defualt configuration setting for exporting DXF flat patterns of sheet metal parts. Our laser machine requires AutoCAD 2000 DXF, and while I'm able to save a configuration file (.ini) with this setting, I still have to click on the "Options" button and then click "Finish" or it will save to the standard default AutoCAD 2010 DXF file version and our laser will be unable to read the file.
View 1 Replies
View Related
Aug 22, 2012
I have an HP Designjet 800 that is currently loaded with a 36" roll. I'd like to print to ANSI D in a landscape orientation, but D (landscape) isn't an option in the paper size drop down. Printing D in portrait orientation just wastes a bunch of paper space.
How do I change the paper from 22x34 to 34x22? (or vice versa, whichever way I need).
View 5 Replies
View Related
Jan 9, 2013
Why I cannot remove the ISO b1 full bleed from this plot config file?
I never print metric so there is no need to for it.
View 2 Replies
View Related
Nov 25, 2013
I'm doing an evacuation plan of an office building. The drawing itself is in the model space, obviously. The fire extinguishers and escape routes are added in layout.
The problem is that everything that I add in the layout ends up beneath the drawing in model space. I.e. the walls of the building are shown in front of the fire extinguishers which makes my evac.plan look like poop.AutoCad Architecture 2013.
View 3 Replies
View Related
Nov 20, 2011
Somehow the Content Center Filter clears all content while in ISO or DIN. Both libraries are turned on in project.
I can see only one custom library when either filter engaged. I also see both ISO and DIN parts when filter is off.
[URL] ........
View 4 Replies
View Related
Apr 19, 2012
Since installing Buildinfg Design Suite Standard 13 my content explorer is showing a yelow error sign saying indexing error over content drawing icons. How do i fix this?
View 2 Replies
View Related
Sep 1, 2007
I am about to do some reconfiguring of my system so I figured I'd find the best way to optimize for Photoshop.
I currently have Windows (and page file), Photoshop (and all other apps) and data on my C: drive (7200 RPM - 80 gigs of free space). My D: drive is a separate physical drive (not a partition) with 45 gigs of free space. I store photos and music here and use it as my Photoshop Scratch disk.
I am buying a new 500 gb USB drive to use as storage (for things like photos and music) and backup. All of the contents of the D: drive will be moving to the new drive thus leaving me with 80 gb of free space on the D: drive.
My questions:
1. Should I continue to run Photoshop on the same drive as my OS?
2. I plan to move my 'data' (files I edit with Photoshop or Illustrator etc.) to my D: drive. Is this OK or should it be on the same drive Photoshop is on?
3. Assuming I move my data to my D: drive... I read that Photoshop berforms best when its Scratch Disk is an empty, unfragmented disk with plenty of room. Since I do not have an empty hard drive to spare, which will yield better performance:
A. Partition my D: drive (which will leave me with D: and E. Use D: for my .PSD and .AI files. Use E: as my Photoshop Scratch Disk
or
B. no partition. Use D: for my .PSD and .AI files as well as for my Potoshop Scratch Disk
View 1 Replies
View Related
Feb 2, 2012
Is it possible to add the Properties Palette to a custom made palette set in .NET? And how to do this?
View 3 Replies
View Related
Aug 15, 2004
My PS is starting to get a little out of control and I hope one of you guys can steer me in the right direction with this.
I do quite a bit of stuff in hi rez (300 dpi) switching back and forth between actual pixel view and fit on screen modes. Recently my "fit on screen" mode wants to keep getting bigger and bigger and no longer snaps back to the correct screen size. Does anyone know how I can fix this?
The other question should be pretty simple. I want to change the default blending options. Things like stroke, inner and outter glow color etc.
View 4 Replies
View Related
Aug 10, 2013
How do you get more fonts to add to the font config? I want to make someimages with cool font but don't know where to find them. This is where I found out about fontconfig [URL]...
View 2 Replies
View Related
Aug 26, 2013
i''ve a problem. After i had removed photoshop CS4 on windows 8. It's still in my config screen.When i push 'remove' i get a message that 'the installationfile is corrupt'. This is also the message when i try to re-installphotoshop 4. I removed all adobefiles in the regedit and msconfig
View 1 Replies
View Related
Nov 29, 2013
I'm using AE CC and can't render any comp using the Quicktime codec. Any other codec seems fine strangely.Attached/below is the error message that crops up whenever I attempt this.
View 4 Replies
View Related
Dec 7, 2012
I wan´t to delete a palette from Autocad Tool Palette. How can I do?
View 3 Replies
View Related
Jul 17, 2013
For some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies
View Related
Nov 30, 2005
I've had a great time using the Web Photo Galleries in Photoshop CS and CS2, especially since I'm fairly deft with HTML and a total Flash dunce, so the Web Photo Gallery Flash 1 and Flash 2 templates have served me well and allowed me to make fun Flash stuff without having to learn. But, with learn-by-doing, there often comes a point of confusion, and I think I've found mine.
I noticed that (when using the gallery "Flash 1"), if I click the little ? in the bottom right, the file name will come on and stay on throughout all the pictures. This is exactly what I want since that's where I do all my captioning and it really adds something for me to be able to see that. My question: how in the world do I get it to do this by default? I'm always telling friends/family, "oh, click the little ? in the bottom right and it'll show the captions," but am certain there must be some way to do this by default.
I fiddled in the galleryconfig.xml file, but there's only this line
HTML Code:
<var symboltype="boolean" name="showHelpButton" value="true" />
which actually just tells the button to be displayed, but not for the thing that happens as a result of pushing the button to stay displayed.
View 8 Replies
View Related
Mar 8, 2012
I've only ever used gimp sparingly and for simple stuff. I now need to set the palette of a 8-bit png to a specified palette, but I can't find any in gimp or online about how to load a palette. I need the palette to contain colors that may not be in the image if thats possible as these images are sprites of under 40 colors, but I need a full 256 color palette. Also is there any simple way to convert a string of numbers into a gimp palette? If not Ill probably just look at how they are saved and just write a simple script, but I thought i would ask.
View 5 Replies
View Related
Jan 4, 2012
I have been trying to get my paletteset to remember it's closed location but cannot. I have tried using a ststic GUD when starting the Paletteset:
Dim MYGuid As Guid = New Guid("DC218198-EFDE-4802-AF55-C9613342F7A4")
M_ps = New Autodesk.AutoCAD.Windows.PaletteSet(String.Format("Rapid Layer", MYGuid))
I have tried saving the location value to the registry from the Close event of the palette, and then restoring it in the Command function.
I have also tried using the App settings to save and restore this value.
How can I get the Paletteset to remember it's last location?
View 7 Replies
View Related
Oct 14, 2013
I am having to go in and edit a design pack/sheet set which was put together by a far more experienced AutoCAD user than I. That person is no longer available to me for consultation.
My next problem: On a sheet I have a viewport, and in the viewport is material which I need to modify, and that material is not anywhere in model space for this document. How do I find out where it is?
View 1 Replies
View Related
May 21, 2012
I placed a datagridview on my toolpalette.Normaly when we press 'esc' key while we are editing in the cell, cell value restore to original.But in my palette, the cell do not get original value.If i placed on separate 'windows application', it works perfect.
View 1 Replies
View Related
Mar 7, 2012
Right now I'm using at the same time AutoCAD 2009 and 2012 (trying the newest version). Thing is that I think that I screwed up both version from changing so much between them.
My problem is that when I click the Layer Properties Manager nothing happens, in both versions, the layer window should appear but it doesn't.
View 9 Replies
View Related
Mar 7, 2011
I am using VB.net . I manage to jig move object, but when I trigger the function from palette AutoCAD drawing won't automatically grab focus. I need to click somewhere on the palette or the drawing.
View 3 Replies
View Related
Apr 27, 2011
when I open LDD04 there is a tools palette opening. How can I get rid of it?
View 9 Replies
View Related
