Since installing Buildinfg Design Suite Standard 13 my content explorer is showing a yelow error sign saying indexing error over content drawing icons. How do i fix this?
View 2 RepliesWhere do I find Content Explorer? Is it the same as Content Browser?
View 1 Replies View RelatedI'm doing an evacuation plan of an office building. The drawing itself is in the model space, obviously. The fire extinguishers and escape routes are added in layout.
The problem is that everything that I add in the layout ends up beneath the drawing in model space. I.e. the walls of the building are shown in front of the fire extinguishers which makes my evac.plan look like poop.AutoCad Architecture 2013.
Where do I find Content Explorer and how do I install it?
Civil 3D 2012
Intel Xeon W3520 @ 2.67 GHz
10GB RAM
64-Bit
Window 7 Professional
Is there a way to browse the Content Center without using Inventor. I am using Inventor 10 with a shared custom content library set up on a separate server. I would like to publish many of our commonly used custom parts for our engineers to search on without having to buy a seat of Inventor for each of them. They would just use it to search, not actually use any of the parts.
View 4 Replies View RelatedI seem to not be able to add a folder that is on our network for content explorer all I see is my computers folders not the servers folder. Is there away to add them? I've tried to drag and drop and it says cant find or have access to warning.
View 9 Replies View RelatedI am wanting to use a hard drive for the content explorer since it bogs down my computers hard drive. But how do I get autocad to find it?
View 3 Replies View RelatedSomehow the Content Center Filter clears all content while in ISO or DIN. Both libraries are turned on in project.
I can see only one custom library when either filter engaged. I also see both ISO and DIN parts when filter is off.
[URL] ........
The content browser in AutoCAD Architecture 2013 does not seem to be working on a standard users computer. The profile has been rebuilt alongside a repair/reinstall through the control panel.
Ctrl+4
Tools > Content Browser
and typing content browser in the command do not result in anything.
When I search in content explorer it work just fine but when I click on a drawing to open it acts like its opening but right at the end it says Error Decrypting Data and wont open I've tried to look for a solution and I cant find anything.
View 6 Replies View RelatedI can't get the content browser. I tried all keys (Ctrl+4, Ribbon,Tool) nothing works even after a complete shut down and a restart.
View 1 Replies View RelatedI have 2 files, A100 and C100, with C100 being xrefed into A100. Both have a few other xrefs in them, being used for whatever reasons, and must stay.If you open either file without the other being present, they open fine, but if they can find each other there's a 20-40 minute lockup.
C100 being a civil drawing, I thought the problem was one of the missing .shx files. So after spending countless hours trying to track it down, I finally noticed a warning when trying to open the files together that C100 had 2200+ scale lists. Using 2008 in the office, scalelistedit gives a runtime error, as well as the 2008 install at home. Using 2010, scalelistedit is successful in solving my 20-40 minute problem. (I did save back down to 2007..)
Now, back in 2008, the Style Manager won't open, as it says there is content from a newer version in the file. Also, any xrefs with AEC content, walls etc, come in without displaying said content.
I just installed Autocad Architecture 2009 on a new computer. Content Browser will not open from the drop down menu or from the Start menu. I have now uninstalled Autocad Architecture 2009 and all Autodesk applications, deleting all folders and autocad registry folders then re-installed with no sucess. Everything else seems to be working fine.
View 6 Replies View RelatedI am using the 'Room tag with Dimensions' from the Content Browser. When it comes into the drawing, the room name is not centered above the rest of the tag text. So, I opened the block and moved the text and then saved the block. When I go to use the tag again - it tags everything - walls, doors, windows, etc...
Also, the drag and drop function does not work well - I have to drag a tool several times into the drawing from the content browser in order for it to work..
My content browser doesn't have the original options it used to have, instead it has a customized version. But the customized version does not have anything in it. How do I get it back? No matter where I search in CAD or in my files I can't find the original. Do I have to uninstall and install the program again?
View 2 Replies View RelatedAutocad Architecture 2014
My content browser is being finicky. The palettes are there, I can select the I-drop but when I release the dropper in my file, nothing happens, no error, no content???
Is it possible to unload and reload just the content browser?
I have used the Content Browser sparsely in the past to drag and drop items to a tool palette....but I was thinking it may be a go location to manage our detail library....
As a test i had tried to drag or copy past autocad details into the content browser with no success. I suppose there is a process to make linework usable for the content browser.
Do i need to convert the linework into a multi-view object and then drag it from the style manager into the content browser?
From time to time the layer properties manger Blanks out. See the attached image. The data is there, under the "fog" - I can view one item at a time by clicking on it.
CLASSICLAYER works in most situations, but it isn't a real fix. If I play with the layer manager long enough I get some degree of rehabilitation - as if it is really trying hard to open, but just can't manage it. The fields sometimes are blocked black, or certain areas of the fields become visible momentarily. If I scroll to the far right I can pick up some information.
I'd just like it to work properly.
I am running AutoCad Architecture 2012 on Windows 7 professional with NVIDIAGeForce GT 440 and dual screens, (however I keep all the autocad work on the same screen).
I've recently upgraded to Win7 64bit. In Acad Architecture (trial versions 2010,2011 &2012)The content browser has nothing in it and the tool palettes aren't there.
View 2 Replies View RelatedWe use AA in the office but we have one version of autocad straight on a laptop. How can I get a tool palette we created in AA into autocad? I understand in AA that you use the content browser in AA to export a palette group but then how do you actually get that into Autocad for use? I think autocad uses an atc file or something like that.
Also, when trying to export the tool palette in AA using the content browser, the help file said I should be able to grab the tool palette and slide/ copy it into the new cataloque I created in the content browser. However, eveytime I grab onto the tool palette, the content browser woudl disappear. I finally just selected all of the items in my tool palatte and copied/ pasted them into the category folder I created within the new catalogue.
Thumbnail icons ( iDrop) not displayed within content browser catalog, why is this?
View 1 Replies View RelatedI just migrated from 2006 to 2012... I was able to get my old custom tool palettes into 2012 by opening the Content Browser and idropping them. However I noticed that these palettes are not 'refreshable' like they used to be. In the Palette Properties it says *This palette is not shared from a catalog*... after doing a search of that message in these forums I found this thread: [URL]....
I followed David's instructions:
1. Created a new Palette Group
2. Created a new palette in that Group
3. i-dropped tools from my custom catalog in the Content Browser onto that new palette.
Still there is no 'refresh' option...???
When using the WBLOCK command, no thumbnail preview is being saved with the block for previewing in Windows Explorer. I have check the RASTERPREVIEW system variable is set to 1, but this makes no difference.
When saving files normally I do not have a problem.
I navigate (all functions, pan zoom, etc) with my space explorer in autocad architecture 2011 any autocad command will be cancelled by the 3d mouse. when use the 3d mouse, the cursor in autocad changes to the default windows cursor display. I have an updated version of autocad 2011 with all of the service packages and hotfixes, the space explorer software driver is up to date too, windows 7 ultimate x64 is updated too.command line example:
Command: _line Specify first point: "I move the 3d mouse" Specify next point or [Undo]: *Cancel*
Command: *Cancel*
I tried reinstalling both autocad and 3dconnexion, restored the default settings of the 3d mouse. I also shutdown the logitech mouse software to make sure it was not interfering with anything. I also double checked that it was not a display refresh issue with the graphics card or the display settings for autocad, I also played with the profiles in the 3dx sofware.
I installed Aucad Architecture 2012 and same freaking issue. The only way to solve it "half way" (so not a real solution) is to change the visual style to other than 2d wireframe, but when doing so, whatever object you are manipulating seems to freeze on the screen and doesn't refresh untill you move the mouse (normal one), basicaly the manipulated object doesn't zoom with the rest of the objects in the screen.
This is very anoying since the purpose of these stuff is to create an uninterrupted worflow not the complete oposite!! this mouse is worth around 200-300 dolars and Autodesk took responsability for it's drivers!! and it doesn't work!! it's faster to work with your regular mouse. Also you should develop the driver version for the Autocad Mac version.
I am having to go in and edit a design pack/sheet set which was put together by a far more experienced AutoCAD user than I. That person is no longer available to me for consultation.
My next problem: On a sheet I have a viewport, and in the viewport is material which I need to modify, and that material is not anywhere in model space for this document. How do I find out where it is?
The company I work for needs to manage and watermark many different types of photos (perfect for Lightroom.) The only problem is, when Im uploading photos to our website, the Lightroom watermarks dont show up in the thumbnail preview of Windows Explorer. When I right click the image thumbnail and select "preview" the full size image preview pops up with the watermark. I guess my question is, is there any way to get the Lightroom watermarks to show up when viewing files in Explorer in large thumbnail view?
View 1 Replies View RelatedI have a block content many attribute. When I'm create the block whit this many attribute, the order of this attribute is not properly. I know autocad have a command to class this many attribute in order but i search it and i don't know where is it.
View 1 Replies View RelatedRecently migrated from windows to mac os and only using this version on a macbook for now until I feel confident to changeover the studio workstation after many years and trying to find some familiar ways around as I have been used to working on LT2004 (although I have upgraded many times I just never really got on with the newer pallettes etc and revert to the tried and tested version to keep productivity at work)
- Is it possible to config the content pallette so I can rotate blocks at the time of insertion without having to either post rotate them individually from the model space or use the insert command which appears not to be as graphically friendly as the content pallette which looks excellent for compiling good for libraries but the option to at least rotate.
- Is there a quick and easy to changing linetypes on the fly from a flyout menu on the toolsets... is there any other way round this without having to access the pull down from the properties inspector pallette as that method consumes quite a bit of screen space?
I used to use the BSI content fine in my old version of Inventor, but on this years version there appears to be no BSI content. I have tried reinstalling the content center and all of the options are selected but still no BSI?
View 2 Replies View RelatedI can log into data managment services outside of inventor.
I can't log into content center or access frame generator from inventor.
INV 2009
I'm using a student version of inventor 2013, and i'm trying using the content center for add bolts at my project, but all the components are unable for my use, because everything are marked as read only.
How can i do for use these components? and other question, how can i create account at vault?