Xara :: Save To PNG But Keep Getting Out Of Memory Errors
Mar 1, 2012
I was trying to save a custom stereogram that is approximately 36" x 24" at 300dpi out of Stereogram Generator, the software I use to compile my stereogram images.
Normally I save to PNG but I kept getting Out of Memory errors.
I finally decided to try another file format and picked Photoshop PSD. Not only did the image save, it saved almost instantly even though the file size is 191 MB! I was able to save one PNG version but it took about 30 seconds and the file size was about 51 MB.Does the PNG format because of its file compression method require more system memory to compress the image?
View 5 Replies
ADVERTISEMENT
Aug 1, 2012
2008 MacBoo Pro with the NVIDIA GeForce 8600M GT 512 MB graphics card tried running Photoshop CS6 under Mac OS X 10.7.4?
On my MacBook Pro, PS CS6 launches; however, any action results in an out of memory error. The CS6 versions of After Effects, Premiere Pro and Illustrator all launch and run as expected under 10.7.4.
If I switch to my Mac OS X 10.6.8 startup volume, Photoshop CS6 runs as expected. I have support cases open with Adobe, NVidia and Apple. Adobe thinks I need to update the display drivers. NVidia says display drivers must be provided by Apple. Apple says that the display drivers are current. The Apple support agent said that he can escalate the case if the issue can be reproduced on more than one computer.
I'd love to keep my MacBook Pro running another year or so without having to reboot in 10.6.8 every time I need to use Photoshop. I'd stay with 10.6.8, but of course iCloud requires 10.7.4. I have not tried Mac OS X 10.8 yet, but it's on my troubleshooting list.
Also, PS CS6 runs fine under Mac OS X 10.7.4 on my 2010 iMac.
View 18 Replies
View Related
Sep 10, 2012
Why do I get memory errors with slide show? Photo Elements 10
View 2 Replies
View Related
Nov 1, 2012
I have just installed Illustrator 9.0, running on Windows 7. The install was fine but when I try to launch the program I receive the following 2 errors:
1) "Pencil or smooth tool out of memory. Try editing at a smaller zoom magnification".I click OK because that's the only option. The next error window occurs with:
2) "The filter cannot complete because of an unknown error" Error: IMEM.I click ok again because that's the only option.
Then the program crashes and I have to exit.
View 2 Replies
View Related
Apr 3, 2012
how do i adjust the memory setting? xara pro7 keeps saying low memory try closing doc. or adjust memory setting... where is this setting located?
pro7
windows xp
memory 8gb
View 6 Replies
View Related
Jan 26, 2011
I love designing vehicle wraps in XD Pro6 but what can I do to export a large image. If I design at half scale then try to export at 200 dpi it crashes and says out of memory.
Have a quad core with 8gb ram Win7 64 bit.
View 8 Replies
View Related
Nov 18, 2009
I recently came across a particularly magical piece of software located here for free. It allows 32-bit programs to address more than 2 GB of memory. It may only work for 64-bit systems though, not sure (i.e. those with CPUs that can work on 64-bit OSs).
I mention this because Xara sometimes crashes with out of memory errors, such as when making large panoramas or doing something else that consumes GBs of memory. By using this utility on the Xara exe to allow it to address more memory than normal, the crashes can stop. This also applies to any other memory intensive software that shows similar behaviour, and makes them much more stable.
The instructions for using the utility to modify exes is below:
MAKE SURE YOU DO A BACKUP COPY OF THE xtreme.exe FILE BEFORE CHANGING IT JUST IN CASE YOU GET INTO TROUBLE
open the program
goto file > open
then find the exe file... in this case it would be xtreme.exe in ./program files/xara/...
On the left side you'll see "NT HEADER".... "DOS HEADER"... etc Highlight "FILE HEADER" under "NT HEADER" On the right side you'll see a chart and in the bottom right corner you will see "CLICK HERE" Click on that and a check box menu system will open. Scroll down the menu list until you see "app can handle > than 2gig address space" and check that. Save the file and close.
View 9 Replies
View Related
Dec 9, 2008
I am getting this message when I try and export an AI file as .psd file. Illustrator is the only app open on a new 24" iMac running 10.5.4. The illustrator file itself is only about 5 mb. Yet . . .I get the message "Not enough memory to save file."
View 31 Replies
View Related
Oct 21, 2011
I'm experiencing difficulties in exporting website from .AI to .PSD using Illustrator CS5.1 under Windows7 Home Premium 64bit. The error message says "Not enough memory to save the file".
I can assure you that i've got enough memory for scratch disks and my computer is powerful enough to handle this operation. The funny thing is that i am able to export the very same .Ai file using Illustrator CS5.1 under Windows XP 32bit on different PC.
I've tried to find a solution online, but it gave no satisfying results so far. So, i think the problem comes from the operating system, but i don't know how to fix it...
View 22 Replies
View Related
May 6, 2011
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies
View Related
Nov 4, 2011
I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
View 16 Replies
View Related
May 15, 2011
I just purchased Xara Photo & Graphic Designer. It's fairly easy to work with. I'm used to Photoshop, but I needed something on the fly, as I'm not at home.
Why can't I save my Xara design as anything other than a .xar file?
This is frustrating! No print shop accepts a .xar file. When I try to save it, it only gives me the option to save it as .xar.
how to convert it to CMYK color.
View 3 Replies
View Related
Jan 11, 2014
This seemed like a big update and took a while on my multiple computers. Before the update I was having glitches exporting my xar drawings to jpg files. It was hit or miss with only small fragments saved, weird file extensions such as Einstein.xar.jpg, needing to save as instead, needing to type the extension, etc. I always had to check my save folder afterwards to make sure exporting worked. It seems like this is now solved and have not had a problem exporting since.
If I am working on a xar file and want to make a jpg file from it, is there any difference between exporting it as a jpg and saving it as a jpg?
View 9 Replies
View Related
Jun 2, 2013
I have a problem, Save As is not working. I usually do my work in Xara, Save, then Save As to whatever format I need.Just recently (last night), I did a Circle (from a template I have), put some text in it. Saved to .Xar format like always.
Then I tried to do a Save As -there was no Choices in the Files drop down -well, actually just two choices:
Xara Design Pro X (*.xar)
All Files (*.*)
I have some screen shots.
View 7 Replies
View Related
Dec 3, 2011
I am trying to save a line of text in PGD6 as a PNG so that it will have transparency. However, each time I export as a PNG and open as an image in my web design software it has a white background and is not tranparent. how to get it truly tranparent?
View 3 Replies
View Related
Dec 22, 2011
can I get xara to use the 100% instead of 75% as a default?
I know how to save settings like this to documents, but as soon as I close all documents, the settings are gone, units settings too, it always forgets them, so annoying. Did I miss a save button?
View 3 Replies
View Related
Jul 28, 2011
Is it possible to Save a .xar file with security options... e.g. Password to Open / Password to Modify ?
View 8 Replies
View Related
Apr 17, 2007
Is there any way to default the "Area to Save" option on the export menu, to "Page"? This is nothing crucial, but it would save me some time, because I select that hundreds of times. If I could pre-define "Page", I would be even more happy
View 8 Replies
View Related
Mar 22, 2011
I have a working document, part of which should become a template for similar docs.
However the part that should become a template is not all that is in the document.
I guess I can turn off the eyeball of all layers or objects not meant to be part of the template but then the template will have all the extra junk in it (turned off).
Is there a better way than saving a copy of the doc, opening it and deleting all that is not meant to be template, then resave as template?
View 1 Replies
View Related
Apr 3, 2012
Is there a way to export all frames of an animation at once as a sequence of gif files? (rather than going to file-->save for each frame)
A related question: is there a way to select multiple objects on different frames for easy editing?
View 7 Replies
View Related
Jun 18, 2013
I used Graphics & Photos 2013, I update the software yesterday and if I save my job as PDF, the transparency done on a picture is inverted.Currently I removed the transparency but it is not the solution.Issue appear only when I create a PDF file. By creating a JPG file it works.
View 9 Replies
View Related
Sep 22, 2012
I used to know how to save my X5 configuration (screen layout, options settings etc.) by saving some registry entries. I've forgotten how to do that. I'm using 7 (not pro) now, how to do that again?
View 5 Replies
View Related
Apr 20, 2012
Whenever I try to open a new blank file in it, it gives me an error message saying I don't have a "default template", and I needed to choose a file and save it as a "default template". So I did, but now, I'm stuck with that template - I can't choose a letter-sized blank page to work on because that choice is no longer on the list under "New". What the heck is going on? I just want a blank page to draw on, and now it's not available.
View 9 Replies
View Related
Jun 23, 2012
I have photo & graphic designer 7 and want to know if its possible to remove the background from a file and save with transparency?
View 9 Replies
View Related
Jan 1, 2014
I purchased Designer Pro 9 about a month ago. I have tried about 30 times, no kidding, to change the US Letter template from Arial 10 to Verdana 12. It happened again this morning and I've decided to finally come to the forum and find out what's going on.
Here's what happens: I open US Letter and make the changes, then choose Save Template. When I reopen it, it's still Arial 10. Makes no difference if I choose "Use as default template" or not. I even tried saving it as a template with a different name, Verdana 12, but it still opens as Arial 10.
As a test, I opened Designer 6, chose New, US Letter, and changed the font to Brussels 12. I then selected Save Template, saved it as Brussels 12, and closed out. Then I chose File/New/Brussels 12. It opened as a letter template with Brussels 12 point. That's the procedure I used years ago to change US Letter to Verdana 12 in Designer 6, and so the Save Template function still works in that version.
Because nothing I've tried seems to work, I am wondering whether any template I create will be saved in 9.
View 5 Replies
View Related
May 25, 2013
Should be a simple question. Using Designer Pro X I load a PNG file. I then do nothing except "save as" also in PNG format.
My expectation was I would get the same file. Instead it seems to have changed the resolution and now looks terrible.
An ordinary graphic program like paint.net or photoshop would save the same file back to disk.
There must be something I am failing to understand about Xara. How do I edit a bitmap and have it save back in its original resolution?
View 3 Replies
View Related
Jul 22, 2009
when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 Replies
View Related
Apr 12, 2010
I've created system printers for our office using the "Add Plotter" application of AC. I've filtered paper sizes for the different printers. However, these filtered paper sizes are not the same for all workstations.
E.g. If I filter out all paper sizes and only check ISO A0 and ISO A1, on some of the workstations there are other paper sizes available. How do I avoid this from happening?
View 8 Replies
View Related
Dec 15, 2013
I use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies
View Related
Nov 4, 2013
I installed cs6 on my brand new Mac laptop yesterday. When I was done, I got a page that said I had over 400 errors during the install.Should I uninstall it and try installing it again?
View 1 Replies
View Related
Sep 7, 2012
I am installing CS6 Design Standard on a MacbookPro 8 mgs ram, system meets all requirements. Yesterday Adobe Tech Support and I were on phone 3 1/2 hours trying to remedy the problem. NO GOOD. Still the same issue.
I get error messages and also when I get into the program it also states that the extension files are missing etc..But the install failed and Minibridge didnt install at all, and does not show up or work at all.
PS open and appears to work some but it states it failed to install and gives me the following error messages;
0 fatal / 4 error / 0 warning
Payload {4FFA830C0-007A-4DB3-955C-B5EEE73BEDAF} Adobe Switchboard 2.0 2.0 0.0.0 ---------
Error: DF013: Failed to delete plist path at / Library/Launchdaemons/com.adobe.switchboard.plist{seq 20}
Error: DW063: ARKCmdFS.dylib:failed for command serviceinstall - error: 7 {Seq20}
Error DW050: The following errors were found during install:
Error DW050 - Adobe Switchboard 2.0: Install Failed
Error: DW050 - Adobe Mini Bridge CS6: Install Failed
View 3 Replies
View Related
