when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 RepliesI installed Adobe Design Premium Suite CS4 4 days ago in HP Compaq dc5100 SFF. I have C drive over 9GB of free space and I am running with 2GB of RAM and 2.80 GHz speed. I encounter an error message popping out in couple of minutes, when I open Photoshop each time as following The instruction at "0x1c904b6b" referenced memory "0x00000028."Â The memory could not be "read." Click OK to terminate the program The following steps I did to resolve the problem, but nothing resolved the problem1) I have increased the RAM to 2GB2) In Photoshop preferences setting, I originally had the default 50% ram given to adobe.. and then tried 75%.3) I uninstalled and reinstalled Adobe Design Premium Suite CS4 The error message is now recurring so that it is impossible for me to work. Any ideas to resolve this memory problem?
View 4 Replies View RelatedMy computer is installed 4GB ram, it's running on Windows XP pro SP3(32bit version, My computer properties show 3GB physical memory). However, in the photoshop memory usage(Edit>>preference>>performance) show available RAM is 1678MB only.
What's problem occur? How can I using more memory?
i have downloaded the trial version to test ps.when i click save it exits Photoshop..and after about 15 minutes a error comes up and it says "memory could not read"
View 5 Replies View Relatedi had CS3 running fine for as long as i can remember.. (on winxp pro sp3 32bit)
then all of a sudden today when i try to start it.. it opens and the splash screen comes up, then when it gets to 'initializing palettes' i get an error that says etc etc memory cannot be read...
i uninstalled, ran the cleaner, deleted all cs3 folders in docs&settings.. reinstalled.. same problem ...
I recently installed CS4 and when I quit Photoshop CS4 I get a "DDE Server... memory could not be 'read'" error. I've looked all over the forums for solutions to this, tried deleting my preferences file, reinstalling CS4, and fiddling with performance options, but nothing seems to make a change. I never had much trouble with CS2 or CS3.
View 9 Replies View RelatedI am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies View RelatedI do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.Â
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
While working on a complicated project involving copying and pasting into PSCS4 from several applications I received this error and Photoshop closed down with loss of my work.
I'm in Windows XP Pro SP3 and using a workstation with 2GB of error correcting memory. I had no such problems in PS3 and other applications work fine.
I am using Adobe Photoshop CS4 Extended Student Edition. My computer is Windows XPI continue to get the error Photoshop exe Aplication ErrorInstructions at oxofa92c5b sometimes is states oxofc42c5breference memory oxoooooo28 Memory could not be read Cancel or debug. it shuts down. no matter what you click. It does this after I get the picture open and when I click on different tools. This is newly installed on my computer and newly bought program.
View 9 Replies View RelatedI am getting some unknow error in autccad and error details are as below
System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at System.Windows.RoutedEventArgs.set_Source(Object value)
[code]....
I get this error "sometimes". It really doesn't seem to have any pattern, i run the calculation several times, it always stops at different point or it finishes successfully.
only connection is the method. It's always at Autodesk.AutoCAD.DatabaseServices.Entity.IntersectWith(Entity entityPointer, Intersect intersectType, Point3dCollection points, IntPtr thisGraphicSystemMarker, IntPtr otherGraphicSystemMarker)
I've got the following error message when I try to open CD file on Windows 2003 using CD 12.
" CORELDRW.EXE - Application Error
 The instruction at "0x016ae2df" referenced memory at "0x00000006".  The memory could not be "read".
 Click on OK to terminate the program "
It's showing when I open .cdr file.Sometimes it is showing from time to time, but on some files it's showing everytime.
I am having troubles making a drawing available to an external consultant. My drawing has 12 XREF files so I created an ETRANSMIT (.zip) file and sent it to him with all the drawings. He extracted the .zip into a folder and is able to view the 12 various referenced drawings as well as the layers pertaining to drawing I sent to him but can not see the referenced in drawings in this file.
He keeps getting this error: "One or more referenced files could not be located or read. Number of missing referenced files: 12".
I have received a drawing from a designer, as I often do, but cannot locate the drawing in the model due to unresolved x refs? I have seen this many times on previous drawings but just ignored and continued but on this occassion I cannot find the drawing once I continue!
When I open the drawing I get the message: One or more referenced files have not been located or read. What do you want to do?
Update location of ref files
Ignore and continue.
I understand that the drawing is there somewhere as the preview pane on the open dialogue box shows the model outline but when I open it after going beyond the above step there is no model and only the 0 layer.
Just upgraded to 32gigs vs the 16 I had and it's working, tested with system reporting programs, etc. And They all show the 32gigs of memory. Went into PS to preferences to change memory usage by PS and it still only shows 14769 of available memory.
Â
Do I need to reinstall PS or what to get it to see the new memory total?
Â
This is on Win 7 64, PS 64
I have an HP Pavilion 730. I have purchased the upgrade to CS4 and it has been working for a while. Now all of a sudden, when I open the program, the computer goes "boink" and a message comes up that says:
The instruction at "Ox77e78804" referenced memory at "0x0at1a1470". The memory could not be written. Click OK to terminate or click cancel to debug program. No matter which one I do, it shuts down CS4 totally?
I have been working on a large group of DNG's and I'm noticing that as I proceed through the edits my computer memory seems to be 'not releasing'. Example: Select photo, process it in RAW, open it in Photoshop CS3, edit, save and CLOSE the image. My computer memory does not seem to be refreshed when I close the image and eventually, after several images, I have to close the application to retrieve the memory. I am running on a PC Vista with 3 gig of memory (max my operating system will work with).
View 21 Replies View RelatedI made a javascript which has to convert and edit 18000 PDF's (pages) to arround 103.000 small images. I use ExtendScript Toolkit 2 to load a small file with all the file locations. Then each file will be opened and edited (one by one). This works fine and there are no real peaks in memory usage.
I let photoshop use arround 1500MB from the 1600 available RAM (Preferences -> Performance). I've never seen the whole system use more then 1200MB (2000MB available).
Despite that there is enough memory, the script stops working with the text "General photoshop error occurred ... this functionality because there is not enough memory (RAM)" in the status bar from ExtendScript.
When I restart the script, it will continue where it stopped and the next file will be converted without a problem.
The PDF file is not the problem and memory usage in general is not a problem.
I have an HP Pavilion 730. I have purchased the upgrade to CS4 and it has been working for a while. Now all of a sudden, when I open the program, the computer goes "boink" and a message comes up that says:
The instruction at "Ox77e78804" referenced memory at "0x0at1a1470". The memory could not be written. Click OK to terminate or click cancel to debug program. No matter which one I do, it shuts down CS4 totally?
I've got a Core2Duo Dell with 4GB of RAM running 32 bit XP Pro. My copy of CS3 sees about half of that RAM. I understand there is a "switch" in XP's Boot.ini that allows PS to read more then the 2GB.
I've read the above MS page & I can't figure out what to do.
When I try to save any of my work in photoshop as a jpeg (not large files-even only 5Mb size ones) it comes up with an error message saying not enough Ram to save. IM using windows xp, I have 2.5Gigs of ram, 100Gigs free space on C drive and 100gigs free space on my other drive (J:). I have checked the scratch disk prefernce and allocated 65% of ram to memory. I have also made my J: drive the number one scratch disk and C:drive as number 2. I have defragged my computer, and made sure no other programs ar running at the same time when im using photoshop. i have checked for viruses and spyware...and it still wont save....
View 3 Replies View Relatedthinking about the following purchase windows vista home premium 64intel 2 duo e7500 [2.93ghz, 3mb l2, 1066mhz fsb]8gb ddr3-1066mhz sdram [4 dimms]512mb ati radeon hd 4350640gb 7200 rpm,sata 3gbs currently have samsun syncmaster 220wm and considering hp w2558hc monitor will this suffice for smooth operation of photoshop cs4
View 3 Replies View Relatedwhen I attempt to use a tool or an adjustment layer, i get a message that the operation can not be performed due to an out of memory condition. this only occurs after i have been processing for an hour or so. when i restart Photoshop (CS3), the problem goes away...for a while. I have 1.1 gigs (70% of total RAM) given to CS3.
View 1 Replies View RelatedI have 1 gig of memory in my graphic machine. I have pshop set to 40% of that memory. How much is too much? What do most of you run as a general %?
View 8 Replies View RelatedI've installed PS CS a week ago and began to use it with stuff from my new
Panasonic FZ20 camera. Tried with .tif and .jpg pictures.
The problem: no matter which kind or size(!) (from 500k to 10M) of pictures
I'm trying to open, it takes it a very long time: opening about 30-40sec,
saving about 2 minutes. At the time the picture is being saved, the PC just
"freezes". I'f I'm waiting, everything returns to normal, but if I'm clicking
Alt-Ctrl-Del, PS stops and I have to open it again.
I'm using a relative powerful machine, P4 3.2, Asus Mobo and Asus 9200 video
card, 1G Mem, 300G HDs (defrgmented...) XP SP2 and so on...
Maybe there is any setup I'm missing at PS ...
At least, I can focus on the REAL Problem :
1. Ctrl-alt-del --> Processes
2. Turning on PS. --> It takes about 40M mem.
3. Opening a new file, about 35 x 25 inches and begining to scribble. -->
the memory it uses begins to "grow" up to 240M and then the proggie stops
responding. CPU at 50%.
4. Leaving it for about 5 min. and returning, it works (still using about
240M memory...) but it freezes every several seconds. The memoy is freed
only by turning the program off.
when I try to render clouds in either PS CS 2 or CS I get this error.
I have reinstalled CS still same message, removed it and put CS 2 on it and still got the same message I have removed all the files and tried to put one of the versions back on here still same message.
System specs
Celeron 2.2ghz
768mb of ram
35 gb hard drive Drive C:
(10.7gbs used space 24.3gbs free space)
2.9 gb hard drive Drive D:
(13.3mb used space 2.8gbs free space)
XP Home Service Pack 2
A error has popped up saying:
Â
Could not complete your request becasue there is not enough memory (RAM).
2008 MacBoo Pro with the NVIDIA GeForce 8600M GT 512 MB graphics card tried running Photoshop CS6 under Mac OS X 10.7.4?
Â
On my MacBook Pro, PS CS6 launches; however, any action results in an out of memory error. The CS6 versions of After Effects, Premiere Pro and Illustrator all launch and run as expected under 10.7.4.
Â
If I switch to my Mac OS X 10.6.8 startup volume, Photoshop CS6 runs as expected. I have support cases open with Adobe, NVidia and Apple. Adobe thinks I need to update the display drivers. NVidia says display drivers must be provided by Apple. Apple says that the display drivers are current. The Apple support agent said that he can escalate the case if the issue can be reproduced on more than one computer.
Â
I'd love to keep my MacBook Pro running another year or so without having to reboot in 10.6.8 every time I need to use Photoshop. I'd stay with 10.6.8, but of course iCloud requires 10.7.4. I have not tried Mac OS X 10.8 yet, but it's on my troubleshooting list.
Also, PS CS6 runs fine under Mac OS X 10.7.4 on my 2010 iMac.
It was already a problem with CS4 but it's worse with CS5. Under CS4 it was regularly necessary to me to relaunch the appli to empty the memory (even without image, after use, CS4 indicated n Giga in the window of the processes)The same phenomenon with CS5, but moreover, if I have some one about ten images in display, in the course of processings the functions spend in break the time to put in memory (swap) of the data on the hard disk... In the course of this type of processing I exceed hardly 5 Go...For information I work under Vista 64 bits - 24 Go of lively memory (17 available Go for Photoshop), processor Intel I7 930It seems to me that there is no reason that Photoshop keeps(guards) in memory history after closure(lock) of a photo!
View 6 Replies View RelatedI used Photoshop CS6 without problem until now. Now I dont have enought ram , still cpu processing, freezing and delete my UI layout. I cant work with this I have Core2Quad, 8GB ram, GeForce 250 GTS with Windows 8. Latest driver I also tried beta version and older version. Clean settings, disable opengl, reinstal photoshop, install 32 bit of photoshop I tried everything. All my programs (AE, Premiere, Softimage) works perfect. I dont use any plugins. Also tried compatibility mode. Now it looks that I have to reinstall windows.
View 14 Replies View Related