Photoshop :: The Instruction At "0x1c904b6b" Referenced Memory .. Could Not Be Read
Apr 16, 2009
I installed Adobe Design Premium Suite CS4 4 days ago in HP Compaq dc5100 SFF. I have C drive over 9GB of free space and I am running with 2GB of RAM and 2.80 GHz speed. I encounter an error message popping out in couple of minutes, when I open Photoshop each time as following The instruction at "0x1c904b6b" referenced memory "0x00000028."Â The memory could not be "read." Click OK to terminate the program The following steps I did to resolve the problem, but nothing resolved the problem1) I have increased the RAM to 2GB2) In Photoshop preferences setting, I originally had the default 50% ram given to adobe.. and then tried 75%.3) I uninstalled and reinstalled Adobe Design Premium Suite CS4 The error message is now recurring so that it is impossible for me to work. Any ideas to resolve this memory problem?
View 4 Replies
ADVERTISEMENT
Jul 22, 2009
when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 Replies
View Related
Sep 6, 2013
I am having troubles making a drawing available to an external consultant. My drawing has 12 XREF files so I created an ETRANSMIT (.zip) file and sent it to him with all the drawings. He extracted the .zip into a folder and is able to view the 12 various referenced drawings as well as the layers pertaining to drawing I sent to him but can not see the referenced in drawings in this file.
He keeps getting this error: "One or more referenced files could not be located or read. Number of missing referenced files: 12".
View 4 Replies
View Related
Aug 9, 2012
I have received a drawing from a designer, as I often do, but cannot locate the drawing in the model due to unresolved x refs? I have seen this many times on previous drawings but just ignored and continued but on this occassion I cannot find the drawing once I continue!
When I open the drawing I get the message: One or more referenced files have not been located or read. What do you want to do?
Update location of ref files
Ignore and continue.
I understand that the drawing is there somewhere as the preview pane on the open dialogue box shows the model outline but when I open it after going beyond the above step there is no model and only the 0 layer.
View 6 Replies
View Related
Nov 7, 2008
My computer is installed 4GB ram, it's running on Windows XP pro SP3(32bit version, My computer properties show 3GB physical memory). However, in the photoshop memory usage(Edit>>preference>>performance) show available RAM is 1678MB only.
What's problem occur? How can I using more memory?
View 5 Replies
View Related
Jan 16, 2013
i have downloaded the trial version to test ps.when i click save it exits Photoshop..and after about 15 minutes a error comes up and it says "memory could not read"
View 5 Replies
View Related
Sep 2, 2008
i had CS3 running fine for as long as i can remember.. (on winxp pro sp3 32bit)
then all of a sudden today when i try to start it.. it opens and the splash screen comes up, then when it gets to 'initializing palettes' i get an error that says etc etc memory cannot be read...
i uninstalled, ran the cleaner, deleted all cs3 folders in docs&settings.. reinstalled.. same problem ...
View 4 Replies
View Related
Dec 17, 2008
I recently installed CS4 and when I quit Photoshop CS4 I get a "DDE Server... memory could not be 'read'" error. I've looked all over the forums for solutions to this, tried deleting my preferences file, reinstalling CS4, and fiddling with performance options, but nothing seems to make a change. I never had much trouble with CS2 or CS3.
View 9 Replies
View Related
Nov 9, 2008
While working on a complicated project involving copying and pasting into PSCS4 from several applications I received this error and Photoshop closed down with loss of my work.
I'm in Windows XP Pro SP3 and using a workstation with 2GB of error correcting memory. I had no such problems in PS3 and other applications work fine.
View 2 Replies
View Related
May 20, 2009
I am using Adobe Photoshop CS4 Extended Student Edition. My computer is Windows XPI continue to get the error Photoshop exe Aplication ErrorInstructions at oxofa92c5b sometimes is states oxofc42c5breference memory oxoooooo28 Memory could not be read Cancel or debug. it shuts down. no matter what you click. It does this after I get the picture open and when I click on different tools. This is newly installed on my computer and newly bought program.
View 9 Replies
View Related
Dec 5, 2012
I am getting some unknow error in autccad and error details are as below
System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at System.Windows.RoutedEventArgs.set_Source(Object value)
[code]....
View 1 Replies
View Related
Jun 8, 2011
I get this error "sometimes". It really doesn't seem to have any pattern, i run the calculation several times, it always stops at different point or it finishes successfully.
only connection is the method. It's always at Autodesk.AutoCAD.DatabaseServices.Entity.IntersectWith(Entity entityPointer, Intersect intersectType, Point3dCollection points, IntPtr thisGraphicSystemMarker, IntPtr otherGraphicSystemMarker)
View 2 Replies
View Related
Oct 15, 2007
I've got the following error message when I try to open CD file on Windows 2003 using CD 12.
" CORELDRW.EXE - Application Error
The instruction at "0x016ae2df" referenced memory at "0x00000006". The memory could not be "read".
Click on OK to terminate the program "
It's showing when I open .cdr file.Sometimes it is showing from time to time, but on some files it's showing everytime.
View 4 Replies
View Related
Mar 7, 2007
I'd like to hear if anyone has any experience with Lr books. At 35 to 50 bucks each and the hundreds of pages buying the wrong one or many could make a major hole in ones Latte' budget and the time to enjoy them.
In short: experience and recommendations.
Oh yeah, I read the manual that comes in the box, took 15 minutes and was of nearly no use.
View 1 Replies
View Related
Oct 5, 2011
Is it possible to get written instruction on moving falling snow for pse 9 / mac.
View 4 Replies
View Related
Jan 28, 2014
Why can't I view the instruction videos on tv.adobe.com? They have been unavailable for some time.
View 4 Replies
View Related
Sep 19, 2013
How to create an file with graphs and tables (instruction manual) in one language and create afterwards many different linked copies where just the language should be manually changed? While editing the original (graphs etc..) the copies now should change the same way except the language.
View 5 Replies
View Related
May 6, 2011
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies
View Related
Nov 4, 2011
I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
View 16 Replies
View Related
May 4, 2012
How to do it?
I am using Inv/Vault Pro 2011.
View 9 Replies
View Related
May 31, 2013
I am trying to find which Photoshop software would be best to use for stitching together pictures taken from a helicopter drone. These pictures will be Geo tagged with GPS information attached to individual pictures.
Also, is there a way to stitch together the referenced pictures, and then convert the single (pieced together larger composite picture) to a KMZ or KML file to overlay into Google Earth?
View 1 Replies
View Related
Oct 5, 2011
I am trying to debug a project and I have started to use a few different third party libraries. This causes a huge headache since when I netload the DLL with the command method defined in it, nothing will run since I get errors stating that I am missing a reference.
For example: I create a library that is used to process text strings from a drawing (no AutoCAD .NET, just takes text in) and create a report based on this text and create a class library DLL of this. I now create a AutoCAD .NET class library with a command method and in this command method I loop through blocks and send the attribute text to class library. In order to do this I add a reference to my previous project DLL file and add a using directive. By default CopyLocal is set to true so I hit build and it is successful (now my class library DLL and AutoCAD .NET library DLL are in the same debug folder). Now I go into AutoCAD and NETLOAD the command method DLL from the debug folder and I am unable to run it since AutoCAD will complain about that referenced class library DLL that I created in the first step.
The only way that I can get my command to run is if I manually NETLOAD each dependant DLL that I have added to the project. How can I avoid this? I am at the point where my project is getting complex and NETLOADing 20 DLL's just to debug is getting painfull.I have read someplace that I would have to add all of my referenced DLL's to the AutoCAD folder, but this seems messy and hard to control (what if somoene else is using the same library but a different version?)
Why is it that my code has references defined, and using statements to say I am using these libraries but AutoCAD refuses to locate these references?
Is there a simple way to get around this without copying files all over the place? The third party libraries are either in the debug folder from copying manually, or copy local is set to true. I do not understand why when you tell AutoCAD to load a DLL from a folder that it would not try to resolve dependencies from the folder you pointed it to.
Just to clarify my question is: Is there a simple way for AutoCAD to resolve referenced third party / custom DLL's that are included with an add-in? And this question is for development and not an installer. I want to hammer out a test solution and test quickly without copying files all over or editing the registry.
View 4 Replies
View Related
Jul 15, 2013
Is there a way to add a child to an object that is referenced in another scene, and get this child on the scene where this object is referenced?
I've made instances of this particular object, so I would like to see this child with every instanciated objects in my scene.
When I talk about a "way", it could be a script, a plugin or whatever.
View 1 Replies
View Related
Dec 7, 2010
I have created a data shortcut to a surface using Civil3D 2011. When I create a reference to it in another drawing, it shows up in the Prospector but nothing shows up on the screen. I have played with the surface style and made sure all the layers were on and tried closing and reopening the drawing.
I have also tried to reference it into a brand new blank drawing and I even tried to reference a surface in a different file that I have referenced several times before (in 2010). Every time I get the same results. It seems like the surface is there, but I just can't see it.
View 2 Replies
View Related
Sep 23, 2013
I am going through our Civil 3D template and purging all layers we do not use. However, there are four assembly layers AutoCAD won't let me delete, but I cannot find any style or object referencing them. If it matters, the layers are C-ROAD-ASSM, C-ROAD-ASSM-BLIN, C-ROAD-ASSM-OFFS, and C-ROAD-SCTN-DIAG.
View 6 Replies
View Related
Jul 10, 2012
I am working in Civil 3D 2010 and I created a surface a while back which 4 pipe networks have been referenced to and the surface has been data shortcut'd. I am now facing the issue that the surface needed to be renamed.
I looked in the Data Shortcuts folder and the name didn't change on the shortcut. All the pipe networks have errors now cause it is looking for a surface that technically no longer exists.
I tried deleting the Data Shortcut and creating a new one with the new name and resetting all the networks to the new surface but I am still gettting errors.
Is there a step that I am missing to get all this to link together properly with the new name?
View 4 Replies
View Related
Sep 27, 2012
I've lined up an image myself in Civil 3D over a topographical survey but now I want to export the image as a geo-referenced image so it can be brought into Mapinfo and Tuflow in the right place, coordinate-wise.
My question is - is it possible, and how do you do it!
View 5 Replies
View Related
Dec 19, 2012
I've been getting this Undefined Alias Referenced error showing up every time I open one specific drawing.
Also, I'm not sure if this is related to the first part. In the same drawing I have several png files that I can't get rid of.
View 9 Replies
View Related
Nov 8, 2012
We make a small Animation Movie and from time to time we stumble upon strange behaviours of the referencing pipeline.
There is a Kitchen that will be the scenery for the Movie Scene Set up: all models i.e the toaster, the fridge ansd so on are modeled and saved.then in the Kitchen File we have an empty scene where all the objects are referenced in. thats the "model master"scene.now we referenced the toaster_model into toaster_shaded, did all the shading and changed the references in the kitchen from toaster_model to toaster_shaded.
On some objects we noticed, that the updates made on the models for examlpe if we scale up the toaster on 2 and freeze transforms afterwards, the change is not updated in the Kitchen file. But after a few days the update works...
System:
AMD x6 3.2Ghz
16gb Ram
Nvida GTX 460SE
View 1 Replies
View Related
Mar 4, 2012
I am drawing an as-built plan and utilizing a scanned image of the plan as a go by. The image is referenced into the drawing. Sometime I want to turn the image off by selecting it and clicking "show image" icon on the show image > options tab. After turning the image off, if I forget to unselect the image before continuing, I risk deleting the image and creating an unreferenced image.
I thought i could solve the problem by locking the layer the image in on, but then I can not turn the image on and off!
View 1 Replies
View Related
Jan 14, 2013
I am creating a new set of drawings but using information from an existing set. On the existing set there is a reference of an image of our company logo in the format. The path for the image is to the my pictures folder for the previous drafts person. Is there a way to redefine this path or do i have to reinsert the image. The format is not a block.
View 3 Replies
View Related