I am going through our Civil 3D template and purging all layers we do not use. However, there are four assembly layers AutoCAD won't let me delete, but I cannot find any style or object referencing them. If it matters, the layers are C-ROAD-ASSM, C-ROAD-ASSM-BLIN, C-ROAD-ASSM-OFFS, and C-ROAD-SCTN-DIAG.
View 6 RepliesI use a building key for building reference (inserted as a xref into the individual drawings) in many of my drawings. I have layers for specific areas and rooms. I turn off the layers on the appropriate drawings (if the drawing is for room 301, I make sure all other layers are off and only 301 are on).
My problem come when I add a new layer to the key and since the key in xrefd into many drawings it shows up as always being on.
This makes to have to go back and do a little bit of layer control each time I change the xref.
VISRETAIN=1 only keeps the layers set to last save and everything added to the xrefs are basically taken from the xref (color, visibility, etc). Is there a way to set a variable so that you have to check the new xref layers before they show up on the referenced drawing?
I have created a data shortcut to a surface using Civil3D 2011. When I create a reference to it in another drawing, it shows up in the Prospector but nothing shows up on the screen. I have played with the surface style and made sure all the layers were on and tried closing and reopening the drawing.
I have also tried to reference it into a brand new blank drawing and I even tried to reference a surface in a different file that I have referenced several times before (in 2010). Every time I get the same results. It seems like the surface is there, but I just can't see it.
I am working in Civil 3D 2010 and I created a surface a while back which 4 pipe networks have been referenced to and the surface has been data shortcut'd. I am now facing the issue that the surface needed to be renamed.
I looked in the Data Shortcuts folder and the name didn't change on the shortcut. All the pipe networks have errors now cause it is looking for a surface that technically no longer exists.
I tried deleting the Data Shortcut and creating a new one with the new name and resetting all the networks to the new surface but I am still gettting errors.
Is there a step that I am missing to get all this to link together properly with the new name?
I've lined up an image myself in Civil 3D over a topographical survey but now I want to export the image as a geo-referenced image so it can be brought into Mapinfo and Tuflow in the right place, coordinate-wise.
My question is - is it possible, and how do you do it!
I've been getting this Undefined Alias Referenced error showing up every time I open one specific drawing.
Also, I'm not sure if this is related to the first part. In the same drawing I have several png files that I can't get rid of.
Not sure if this is something that has been going on a while, if it is a design flaw, or if it just a workflow thing that we should be more mindful of, but here goes:
1. I data reference an alignment into a drawing.
2. I later data reference in a profile that was created from and associated with that alignment.
In this scenario, Civil 3D creates a duplicate alignment for the profile i.e., the orginal alignment is in prospetor as 'Alignment A' and the profile being data referenced in creates a 'Alignemnt A (1)' duplicate and associates itself with it.
This also happens if I bring in a different profile created from the same alignment IF the alignment was already present as a data reference in the drawing.
This seems wrong. It doesn't do any of this if I data reference the profile in first...
I have Civil3d2012 and have created a surface in one drawing and then referenced it to another. It appears to be working, but the contour labels will not work on the drawing where the surface is referenced. I have all the appropriate layers on.
View 1 Replies View RelatedWe have a HUGE number of data referenced surfaces and alignments that need to be moved to a different group of folders. Is there a simple way to do this without breaking the references (each surface/alignment) is referenced into multiple drawings.
The project was divided up into a bunch of little mini projects so now we have 500150_A, 500150_B etc (around 90 of them). Each one has a dwg file with a surface and at least one alignment and that drawing is data referenced to all the other sheets within that mini project. Each project has _Shortcuts, drawings etc.
The powers-that-be have decided to 1) change the project number (from 500150 to 500152) and 2) to bring all these mini projects together into ONE project.
We've confirmed that each surface/alignment has a unique name which means that there shouldn't be a conflict in that regard.
issue that when the xref a drawing with Surface Slope Arrows, that the style changes in the child drawing compared to the parent?
I am hoping to use the standard I am used to of the arrow pointing down the hill (towards the -10ft) rather than what the child file is showing of uphill (away from the -10ft).
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1
Is there any way to determine the source drawing of a dref'ed object? I'm not seeing anything in COM or the .NET API's, hopefully I'm just not looking in the right place.
View 5 Replies View RelatedWe have drawing "A" that contains a surface (call the surface "SurfaceA").
We have another drawing "B", that contains an alignment and a reference to"SurfaceA"
The user created EG profiles in drawing "B", and has been working on this drawing periodically.
Today all of a sudden when he opens Drawing "B", the EG profiles are missing. When you look at "SurfaceA" in Drawing "B", there is no data. We synced, we made sure of the association of the drawings to the projects, etc. etc.
I verified the data shortcuts are OK, and verified that both drawings are in good shape (via Recover and Audit)
But wait.....here is the crazy part. If you shut down Drawing "B" and open it say a dozen times, once or twice in that stretch, "surfaceA" shows up and the EG profiles will appear OK too. It's feels very random.....
How can I screen back an aerial that is being x-referenced into a drawing?
View 5 Replies View Relatedis it possible to get the alignment name which the corridor surface is built from when the surface is being data referenced. in other word no corridor as the middleman.
the way i see it is when corridor suface is referenced, it becomes a regular surface and loses some properties such as parent alignment.
i am still using COM. maybe .net can do it? either way works.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I've begun to create tool palettes to organize my blocks and often-used items. I have no trouble creating the tool palette, inserting regular blocks, export/import of the tool palette and groups, however my problem involves Dynamic Blocks and the fact that I keep each seperate dynamic block in a different file. I do this so that I can easily insert the block into a new drawing.
I'm able to drag the dwg file onto the palette (from explorer to autocad) just fine, that way the block's reference in the palette is the original file. Although when I take this method, I don't gain the lighting bolt to signify a dynamic block.
To get the lighting bolt I insert the block into an empty drawing, save it, then drag the block over to the palette. The problem with this is that the tool palette references the saved blank drawing, not the original block's file.
My endgame is to have a tool palette that contains my dynamic blocks and that will be eventually exported/imported to other computers everytime there is a major change. I also want to be able to change the original block's file and have that change be reflected in the tool palette.
I have a design file that has and alignment with 3 profiles (one surface profilke and two layout profiles)
All these are data referenced to the project. Then they are data referenced into a new file. I bring in one of the profiles that brings in the alignment. Lets call it "Main Street". Then I create another reference to another one fo the profiles and it brings in a copy of an alignment and calls it "Main Street (1)"
This is a pain because I cant get a profile view to show all the profiles because the profiles are associated with three different alignments "Main Street", "Main Street(1)", "Main Street(1)(1)"
This is only happening with one of the of the alignments. The other alignment has all its profiles listed under one alignment.
When creating my plan set, I need to data reference pipe networks into other drawings than that in which they were designed to show crossings in profile views or to separate out profiles into managable drawings. When I do this, if I have swapped a type-13 inlet for a 10' type R inlet or something during design, the data referenced pipe network will replace the 10' type R with a default inlet. Also if I have swapped a proposed 30" pipe for an existing 30" that have different styles, the data referenced pipe network will revert back to the proposed 30" pipe. how to make a data referenced pipe network reflect what is currently in the design drawing?
View 9 Replies View RelatedI have an old man whose eyes are slitty and so I have created a white with a layer and feathered it round his wrinkles and it looks ok. I can add mask track to this in ae and also track it in mocha. I have an iris import clip that I then need to add to the white. It is in .png.
I cannot make a mask path appear on the layer information to the left of the screen so the iris dances about and can't be tracked.
How do I blend the white mask layer and the iris layer so they move as one? Do I put them together then track them togethr in mocha?
I have spent a day on this trying to figure it. On top of that I would also like to clone an eyelid half open so that I can put this on top of white layer, iris layer and then eyelid and track all together. But if possible the white and iris moving together would be enough.
In the instructions on youtube I have also found that when I hit 3d little cube icon I get a black background on the iris and not the old mans face how do I get rid of that?
This is for a man who gets wolf eyes in the film. Would it be easier to get some wolf eyes in photoshop and stick those on? the clip is just 4 secs long.
I used a little bit Civil 3D 2013 for railway design purpose. I understood all the basics but I still have a question : how to implement a railway with double track? In the library, there is only SingleRail subassembly. I'm not sure how to implement what I want or if it already exists in Civil 3D 2013. I found a topic (2006) : [URL]
View 2 Replies View RelatedAfter installing and running the Rail Track Layout tool, the only turnouts that are available are European turnouts. Is there a way to get the standard US turnouts?
View 2 Replies View RelatedWhen cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies View RelatedIn VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
I see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies View RelatedOr can I? "Link" is greyed out
View 8 Replies View RelatedI would like to know how to write a routine to thaw all layers in current drawing and multiple xrefs; then freeze all, then thaw only certain layers globally for a drawing that is open. Such as a dimension plan will thaw only *-BLDG, *-DIMS, *-RD-*, *BNDRY.
I would like to create one that will fit every project which has a different xref name.
I'm curious how many of you use note track in the track view/dope sheet? It is running damn slow here, 15sec to add a note track, 30sec adding a note in dopesheet and 1 mins before I could open up the note editor. I doubt it is being useful at all.
Moreover, the infamous Max MotionClip Manager bugs is caused by that... so do you really use it?
Is it possible to define custom Rail Types in Rail Track Layout Utility for AutoCAD® Civil 3D® 2013?
There is only combobox with predefined Rail types 49, 54, 60.
I found: "The rail type defines the standard turnout types (e.g. 49, 54, 60 etc.)or other user defined types "
, also there is mentioned, that "...pre-prepared turnout types that are written in the XML file ara_switch.xml"
I can't find that ara_switch.xml file.
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies View RelatedI want to create a Layer Filter that excludes both Civil Layers and Xrefs.
I have created one that excludes Civil objects (Excel Civil.jpg) but when I add a filter for excluding xrefs as well the Civil objects appear in the filter again indeed all the layers are included again (Excel Xref.jpg) if I invert the filter nothing is displayed.
I am trying to debug a project and I have started to use a few different third party libraries. This causes a huge headache since when I netload the DLL with the command method defined in it, nothing will run since I get errors stating that I am missing a reference.
For example: I create a library that is used to process text strings from a drawing (no AutoCAD .NET, just takes text in) and create a report based on this text and create a class library DLL of this. I now create a AutoCAD .NET class library with a command method and in this command method I loop through blocks and send the attribute text to class library. In order to do this I add a reference to my previous project DLL file and add a using directive. By default CopyLocal is set to true so I hit build and it is successful (now my class library DLL and AutoCAD .NET library DLL are in the same debug folder). Now I go into AutoCAD and NETLOAD the command method DLL from the debug folder and I am unable to run it since AutoCAD will complain about that referenced class library DLL that I created in the first step.
The only way that I can get my command to run is if I manually NETLOAD each dependant DLL that I have added to the project. How can I avoid this? I am at the point where my project is getting complex and NETLOADing 20 DLL's just to debug is getting painfull.I have read someplace that I would have to add all of my referenced DLL's to the AutoCAD folder, but this seems messy and hard to control (what if somoene else is using the same library but a different version?)
Why is it that my code has references defined, and using statements to say I am using these libraries but AutoCAD refuses to locate these references?
Is there a simple way to get around this without copying files all over the place? The third party libraries are either in the debug folder from copying manually, or copy local is set to true. I do not understand why when you tell AutoCAD to load a DLL from a folder that it would not try to resolve dependencies from the folder you pointed it to.
Just to clarify my question is: Is there a simple way for AutoCAD to resolve referenced third party / custom DLL's that are included with an add-in? And this question is for development and not an installer. I want to hammer out a test solution and test quickly without copying files all over or editing the registry.
I am drawing an as-built plan and utilizing a scanned image of the plan as a go by. The image is referenced into the drawing. Sometime I want to turn the image off by selecting it and clicking "show image" icon on the show image > options tab. After turning the image off, if I forget to unselect the image before continuing, I risk deleting the image and creating an unreferenced image.
I thought i could solve the problem by locking the layer the image in on, but then I can not turn the image on and off!