3ds Max :: Use Note Track In Track View?

Aug 15, 2011

I'm curious how many of you use note track in the track view/dope sheet? It is running damn slow here, 15sec to add a note track, 30sec adding a note in dopesheet and 1 mins before I could open up the note editor. I doubt it is being useful at all.

Moreover, the infamous Max MotionClip Manager bugs is caused by that... so do you really use it?

View 1 Replies


ADVERTISEMENT

VideoStudio :: Video Track Holding Sync With Music Track

Jan 28, 2012

When cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.

View 4 Replies View Related

VideoStudio :: 6 Connecting Voice Track To Video Track During Editing?

Dec 9, 2013

In VideoStudio 6, how does one connect the voice track to the video during the editing process?

My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.

Is there a means to make this happen?

PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.

View 2 Replies View Related

VideoStudio :: Link Audio Track To Video Track

Jan 17, 2012

I see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.

View 2 Replies View Related

Premiere Pro :: Why Can't Link A Mono Track With A Stereo Track

Feb 20, 2014

Or can I? "Link" is greyed out

View 8 Replies View Related

VideoStudio :: Push Video In Video Track After Title Track Is Completed?

Feb 16, 2011

Is there any way to push the video in the video track after the title track is completed ....

View 4 Replies View Related

3ds Max :: Track View - Missing Toolbars Within The Curve Editor

Nov 26, 2011

well I was working on my animation, but the toolbars in the curve editor are gone since yesterday. First I tried the "Load Layout" and "Show Toolbars" function. Then I deleted the 3dsmax.ini and Trackview.ini without result. In the end I reinstalled 3ds Max2012 but nothing changed.

View 5 Replies View Related

3ds Max :: Save Configuration And State Of Track View In Workspace

Aug 10, 2013

I want to save the configuration and state of the Track View in my workspace. So when I start up Max, the Track View opens up in the configuration I had when I last used Max, and/or in my saved workspace.
 
Even after I save my custom workspace, it doesn't save the track view. I have to manually open up the track view, dock it the way I want, and open up my custom layouts I had saved in the track view. This takes a lot of time.

View 2 Replies View Related

3ds Max :: Track View - How To Change Layer Order With Shortcuts

Aug 4, 2011

When Googling I found some pages saying that it should be possible to change the order of the layers in Track View with shortcuts, but they don't say how. Can't find anything about this in the customize dialog.

View 1 Replies View Related

3ds Max Animation :: How To Get Position Parameters For Biped COM To Play Within Track View

Feb 11, 2011

Is there a way to get the position parameters for a Biped COM to play with in Track View? All I get are the rotation parameters.
If that's not possible I'd like to know a way to manipulate the animation between 2 keyframes. The TCB parameters don't seem to be working for this.

View 1 Replies View Related

VideoStudio :: Subtitle Track

Sep 26, 2011

I have a problem with Video-Studio ProX 4: If I insert a new file in the midst of a cued sequence of files, than the cued video-files of the video track give place and stay synchronized, but NOT the subtitles on the title track - therefore I must they all manual synchronize again with the video-track, - what can I do?

View 2 Replies View Related

3ds Max :: Specify Object To Track The Focus?

Jul 29, 2012

I was wondering if there's a way or a script to specify an object to track the focus to rather then just the distance and if in case this would work either for standard cameras and vray cameras.

View 5 Replies View Related

3ds Max :: Visibility Track Not Working?

Oct 14, 2011

I've set up a visibility track on a very simple scene, changed to the scanline renderer, and it just does not work

View 4 Replies View Related

Revit :: Anyway To Track Where All Groups Are Used

Apr 23, 2012

I am using Revit 2012 and am trying to keep track of where all the groups are used in the project.  Instead of clicking through all drawings to check, is there a quick way where I can find such information?

View 6 Replies View Related

AutoCAD Inventor :: Track BOM Changes

Aug 15, 2013

Is there any way to track BOM changes. For instance you have an assembly that was checked in to the Vault. Later revision was made to it. Is there any way to keep track what parts were removed and what parts were added on the latest revision? Is there any tool to get such report?

View 5 Replies View Related

Lightroom :: How To Put Map With GPS Track Into Slideshow

Jul 13, 2013

Is it possible to put a LR map with GPS track into a Slideshow?

View 6 Replies View Related

Photoshop :: How To Get Rid Of Unwanted Audio Track

Jul 20, 2012

I am bringing DPX files into Photoshop as Image Sequences. Afterwards, I am using Export…Render Video, set to Adobe Media Encoder, H.264.
 
The resulting H.264 files have an AAC audio track (presumably, with nothing but zeros, because there is no audio with this material.) How do I prevent Photoshop from adding an audio track?
 
I don't see a way to delete the audio track from the timeline. I don't see a way to export only video in the Render Video settings.

View 3 Replies View Related

VideoStudio :: Can't Use ColorFast On Overlay Track?

May 25, 2013

I've installed NewBlue ColorFast, and it shows up in VS X6 as expected. If I drag and drop it onto the video track, the changes I make apply, no problem. But if I drag and drop it onto the overlay track, then make the changes I need, they don't stick … they go away when the dialogue is closed. Is this filter limited to the video track only? Or do I have a problem here?

View 6 Replies View Related

VideoStudio :: Overlay Track Options

Feb 13, 2012

I rendered (in animation software) a series of .png files with transparency for an overlay in VidStudio. 150 of them that all need to be shortened from the default photo duration of 3:00 seconds. Plus, for each one, I will need to adjust the size of the overlay track. Is there a way to manage the entire track for these adjustments? Or a place to adjust the preferences..?

View 6 Replies View Related

VideoStudio :: Overlay Track Speed

Aug 26, 2013

When I try to combine 2 videos to play over each other (i.e. one full screen one anchored in a corner) the overlay track plays at an accelerated rate with no sound, whereas the main video will play as normal. However if I switch them around the same problem arises, the overlay video plays fine the main accelerated with no sound.

If I play them separately they will both play fine. The video I am trying to anchor was recorded with a webcam and therefore may be the problem. If I need to give more details w/ specs etc.

View 2 Replies View Related

VideoStudio :: Renaming A Sound Track?

Aug 20, 2013

I have been recording some narration in little chunks (for easier editing if needed), but they are called uvs130819-011.WAV. I understand about the date, but I would rather have them named by the first few words of the "paragraph" read, or something else that would make more sense to me.

Is there a way to change the name of the sound clips ?

View 5 Replies View Related

VideoStudio :: How To Change Track Height

Mar 15, 2013

I have googled about changing the height of individual tracks and couldn't find much. Is it adjustable? If not, is this planned for the future?

View 1 Replies View Related

VideoStudio :: Pro X5 - Fade In / Out Overlay Track

Nov 5, 2012

I'm just about ready to buy Corel Studio Pro X5, but one "issue" is bothering me, I cannot fade in and out the overlay track. I can drag the cross-fade onto the image or video, but it doesn't cross-fade with the actual video. Instead, the screen suddenly goes black and the overlay track fades in. Same on the way out, it just fades to black (queue the music ) and then the underlying video pops back in.

I'm using the 30-day trial Video Studio Pro X5.

View 11 Replies View Related

VideoStudio :: Splitting Audio Track

Dec 28, 2012

I decided to make the jump from X3 to X5 ultimate to give Corel a try again, actually the deciding factor for me was the included mercalli stabilization as it seems to be pretty good.

Anyway, I created about a 10 minute movie from a few videos, which is divided into many clips. Now I want to disable the audio from the video track and add a sound track. I found a nice sound track with the included auto music, but I can't figure out a way to mute the entire audio track from the video so I only hear the added music. I can only see how to do it one clip at a time. Is there a way to do all the clips at once?

I guess in hindsight I should have muted the audio from the video before splitting them into clips, but I've been used to using Vegas which allows you to mute the audio from the entire video track and thought I could do it later with X5.

Am I stuck with doing one clip at a time? Or do I have to save the movie then bring it in as one large clip then mute the audio from the video so I can replace it with a music track? the mercalli seems to work pretty good - which version it is they bundle with X5?

View 2 Replies View Related

VideoStudio :: X4 Titles In Overlay Track?

Mar 7, 2011

Using Video Studio X4 I have noticed that I can insert a Title to the overlay tracks. The initial title goes to the title track, but can be dragged to the overlay track.

I’ve had a look at the track manager and as expected there is still the option to use two title tracks. Even so the ability to use the overlays for titles is very interesting.

View 3 Replies View Related

VideoStudio :: Music Track Is Not Rendered

Apr 26, 2013

I must have turn off a switch somewhere, after rendering a project I found the music track is not included. I can hear the music track in edit and preview. But after render the project, the audio attached with the video is ok except no music.

View 1 Replies View Related

VideoStudio :: Crossfades In Overlay Track

Sep 29, 2013

I have seen tutorials and used successfully the process needed to produce a cross fade between the primary video and overlay tracks in VS pro x5, but it's a process requiring several steps. I was recently revisiting my VS version 9 located in another computer when I noticed that VS9 seems to automatically place crossfades between the two tracks.

Is it possible to do this in VS pro X5? Was this feature abandoned on versions later than VS9?

View 1 Replies View Related

VideoStudio :: How To Insert Second Video Track

Feb 24, 2012

I'm a professional musician trying to create material for my website and YouTube. I recently shot video with two cameras at an event. I need to learn

1) how to insert the second video track,
2) how to line it up to the exact time of the first video track, and 3) how to pan back and fourth between tracks to create a short film.

View 11 Replies View Related

Revit :: Modeling Rail Track

Nov 23, 2011

We are currently looking at how to model rail track in Revit to avoid a Bentley solution (Microstation / MX). A piece of track curves left and right in plan and up and down in section whilst at the same time twisting. We can ignore that it is track, effectively all want to do is extrude a shape along a 2 axis curve whilst twisting the shape.
 
 It is possible to use a swept blend to create a twist along one curve in either axis, but not both axes as far as I have worked out. To make this more difficult the swept blend will also only let you sweep along one curve at a time, so if it was snaking in plan on a flat surface each curve would need to be set up and sweep over and over which is not really a suitable solution.

View 9 Replies View Related

GIMP :: Track Changes To Layer Visibility?

May 26, 2012

Can I make it so that the undo history in Gimp doesn't track changes tolayer visibility?

(I do a lot of compositing with layers, so I don't really want it to tracklayer visibility changes so I have a nice undo history with only changes Imade to the image.)

View 1 Replies View Related

Lightroom :: How To Keep Track Of Different Versions Of Same Image

Mar 10, 2012

The workflow seems pretty intuitive. There's one area that I can't figure out though and that's how to keep track of different versions of the same image.I have a number of images that are the same "base" image but in different formats (and folders), say a RAW file and a JPEG. Is there a way to link or track those two images in Lightroom so if I make changes to one image (adding keywords, for example) the changes are made to the other automatically?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved