I get this error "sometimes". It really doesn't seem to have any pattern, i run the calculation several times, it always stops at different point or it finishes successfully.
only connection is the method. It's always at Autodesk.AutoCAD.DatabaseServices.Entity.IntersectWith(Entity entityPointer, Intersect intersectType, Point3dCollection points, IntPtr thisGraphicSystemMarker, IntPtr otherGraphicSystemMarker)
I am getting some unknow error in autccad and error details are as below
System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at System.Windows.RoutedEventArgs.set_Source(Object value)
[code]....
I am building a standalone VB app to edit block attribute values. It works fine until I try to save the drawing(s) and ACAD give this message.
By the way. Only happens when I try to save it from VB. In ACAD I can open and save fine.
I'd like to format the memory stick that Inventor was shipped on. (Don't need it anymore) But when I tried to format the stick I got a error "The disk is write protected". Is it not possible to format the disk? I rather reuse it than throw it in the thrash..
View 9 Replies View Relatedi install autodesk remote to try it out from home. when i went to my office to the actual work station i rebooted my machine and now im getting a popup box that says my menu file is write protected. i uninstalled the file, and rebooted my machine and im still getting this warning that my menu is write protected,. no other work station is getting this error, the menu file is a shared file running off a network and no other versions exists on my hard drive.
View 2 Replies View RelatedOriginally was using Vs10 when most of my discs would only get to 58% and go no further, threw away many discs thinking they were the problem. Have now upgraded to VS11.
The solution is to get hold of a small (free) utility called FixVTS from here: [URL]
After some fooling around with LR4, I went out and bought Martin Evenings PSLR4 'book', did some read and started looking for a photo to play with...
I discovered that all of the photos on my usb hard drive were either write protected or the image type was not supported-they're all .jpg. I had done some Copyright stuff on a few photos the day before...fooled around with import and export and some other exploring.
I am currently using Civil 3D 2013, and when I do a qsave, my drawing gives me the following error dialogue box.
"Drawing File is Write Protected" - I am the only on in the files, so now my file is currently Read Only - then I am able to re-open the same file as the same time I have the currently read only version open.
I am getting this currently after or during Plan Production, creating sheets, and I do a qsave.
I am using Civil 3D 2013 Hotfix 1
Windows 7 64 bit system
12GB Ram
Quad Core Xeon 3.2
Server is using Microsoft Server 2008
How to do it?
I am using Inv/Vault Pro 2011.
I am using the photoshop cs6 cc trial and after editing I try to save file but it gives me an error message and says something about write protection.
View 1 Replies View RelatedReceiving a "The media is write protected" error. Seems like I can do certain edits but so far I know I can't use my liquify tool.
View 2 Replies View RelatedPremier Pro on a MAC.
Error code:
Scratch disks are write protected or unavailable. To open this project,, the scratch disks will be set to your Documents folder. Would you like to continue?
I want to save and update my form on d:hsezenn.xls.
but when I try this. ı have same eror.
how can I save and update my data on d:hsezenn.xls ?
There seems to be a glitch in AutoCAD with allowing another user to access a drawing that someone already has open. Most of the time , it will not allow this and will correctly give the message that someone is already in the file and give the option of opening file as read only.
There have been a few times though that someone will not be prevented from accessing the file and the read and write privileges will be transferred to the new user that opened the file last. How do we prevent this from happening??
I am looking for an Example of accessing 2011 AutoCad FX Table.
I would like to programmatically read and write dimensional and user parameters.
I have some numeric data like 1, 2, 3, 4, 5 in mtext format in autocad drawing file and some numeric data like 1,2, 3 in notepad.
How can i get the remaining numeric data of autocad dwg into another notepad using autolisp or visual lisp
1) Can I use photoshop SDK to build independent desktop app (not photoshop plugin) to read/write/edit psd file? If yes, is there any license rule I must follow?
2) Can I use photoshop API to build more module to read/write/edit psd file,
then use this core module to build complete web-based app with wonderful flex as front-end and that core module is back-end?
If both above 2 items it not capable of implementing, is there another way to build independent desktop app or web-based app for read/write/edit psd file?
Is it possible to write a Macro in the CUI that opens a drawing in Read-Only mode? Limitation : AutoCAD LT.
View 7 Replies View Relatedwhen I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 Replies View RelatedWhen I save a photo in Photoshop CS6 v13, as a .jpg file, it automatically gives me read and write permission, but not others. This is a pain as I have to change it each time I want to send someone a photo.
View 2 Replies View Relatedis it possible to add WebP read/write support? [URL]....
View 11 Replies View RelatedMax 2013 now can't read or write final gather maps. I get an error cannot open map file. I have tried using a unc path \server name. I had the problem previously whan I moved to win 7 and I got around it by turning off my UAC. But that is off.
View 1 Replies View RelatedMy computer is installed 4GB ram, it's running on Windows XP pro SP3(32bit version, My computer properties show 3GB physical memory). However, in the photoshop memory usage(Edit>>preference>>performance) show available RAM is 1678MB only.
What's problem occur? How can I using more memory?
i have downloaded the trial version to test ps.when i click save it exits Photoshop..and after about 15 minutes a error comes up and it says "memory could not read"
View 5 Replies View Relatedi had CS3 running fine for as long as i can remember.. (on winxp pro sp3 32bit)
then all of a sudden today when i try to start it.. it opens and the splash screen comes up, then when it gets to 'initializing palettes' i get an error that says etc etc memory cannot be read...
i uninstalled, ran the cleaner, deleted all cs3 folders in docs&settings.. reinstalled.. same problem ...
I recently installed CS4 and when I quit Photoshop CS4 I get a "DDE Server... memory could not be 'read'" error. I've looked all over the forums for solutions to this, tried deleting my preferences file, reinstalling CS4, and fiddling with performance options, but nothing seems to make a change. I never had much trouble with CS2 or CS3.
View 9 Replies View RelatedI've got the following error message when I try to open CD file on Windows 2003 using CD 12.
" CORELDRW.EXE - Application Error
The instruction at "0x016ae2df" referenced memory at "0x00000006". The memory could not be "read".
Click on OK to terminate the program "
It's showing when I open .cdr file.Sometimes it is showing from time to time, but on some files it's showing everytime.
While working on a complicated project involving copying and pasting into PSCS4 from several applications I received this error and Photoshop closed down with loss of my work.
I'm in Windows XP Pro SP3 and using a workstation with 2GB of error correcting memory. I had no such problems in PS3 and other applications work fine.
I am using Adobe Photoshop CS4 Extended Student Edition. My computer is Windows XPI continue to get the error Photoshop exe Aplication ErrorInstructions at oxofa92c5b sometimes is states oxofc42c5breference memory oxoooooo28 Memory could not be read Cancel or debug. it shuts down. no matter what you click. It does this after I get the picture open and when I click on different tools. This is newly installed on my computer and newly bought program.
View 9 Replies View RelatedI installed Adobe Design Premium Suite CS4 4 days ago in HP Compaq dc5100 SFF. I have C drive over 9GB of free space and I am running with 2GB of RAM and 2.80 GHz speed. I encounter an error message popping out in couple of minutes, when I open Photoshop each time as following The instruction at "0x1c904b6b" referenced memory "0x00000028."Â The memory could not be "read." Click OK to terminate the program The following steps I did to resolve the problem, but nothing resolved the problem1) I have increased the RAM to 2GB2) In Photoshop preferences setting, I originally had the default 50% ram given to adobe.. and then tried 75%.3) I uninstalled and reinstalled Adobe Design Premium Suite CS4 The error message is now recurring so that it is impossible for me to work. Any ideas to resolve this memory problem?
View 4 Replies View RelatedI am having trouble shelling a part I have designed. Every time I try, with no matter what thickness, I get the following message:
"The attempted shell operation had non-manifold inputs. Try with manifold inputs."