AutoCAD 2013 :: Autodesk Remote - Menu File Is Write Protected
Sep 27, 2013
i install autodesk remote to try it out from home. when i went to my office to the actual work station i rebooted my machine and now im getting a popup box that says my menu file is write protected. i uninstalled the file, and rebooted my machine and im still getting this warning that my menu is write protected,. no other work station is getting this error, the menu file is a shared file running off a network and no other versions exists on my hard drive.
I am currently using Civil 3D 2013, and when I do a qsave, my drawing gives me the following error dialogue box.
"Drawing File is Write Protected" - I am the only on in the files, so now my file is currently Read Only - then I am able to re-open the same file as the same time I have the currently read only version open.
I am getting this currently after or during Plan Production, creating sheets, and I do a qsave.
I am using Civil 3D 2013 Hotfix 1 Windows 7 64 bit system 12GB Ram Quad Core Xeon 3.2 Server is using Microsoft Server 2008
Originally was using Vs10 when most of my discs would only get to 58% and go no further, threw away many discs thinking they were the problem. Have now upgraded to VS11.
The solution is to get hold of a small (free) utility called FixVTS from here: [URL]
I am getting some unknow error in autccad and error details are as below
System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. at System.Windows.RoutedEventArgs.set_Source(Object value)
I'd like to format the memory stick that Inventor was shipped on. (Don't need it anymore) But when I tried to format the stick I got a error "The disk is write protected". Is it not possible to format the disk? I rather reuse it than throw it in the thrash..
I get this error "sometimes". It really doesn't seem to have any pattern, i run the calculation several times, it always stops at different point or it finishes successfully.
only connection is the method. It's always at Autodesk.AutoCAD.DatabaseServices.Entity.IntersectWith(Entity entityPointer, Intersect intersectType, Point3dCollection points, IntPtr thisGraphicSystemMarker, IntPtr otherGraphicSystemMarker)
After some fooling around with LR4, I went out and bought Martin Evenings PSLR4 'book', did some read and started looking for a photo to play with...
I discovered that all of the photos on my usb hard drive were either write protected or the image type was not supported-they're all .jpg. I had done some Copyright stuff on a few photos the day before...fooled around with import and export and some other exploring.
Scratch disks are write protected or unavailable. To open this project,, the scratch disks will be set to your Documents folder. Would you like to continue?
I am trying to enter use the URL... and I am prompted by an Password Protection.
1.) crosshair 2.) clear swipe areas 3.) Desktop Tools (like the Idea where you placed the "hacked" ones) 4.) beiing able to kill the tabs at the bottom and the apple bar at the top 5.) TRIM MODE like AVID (no ones really knows how handy this thing is when you have 16or more audio tracks at a feature film) 6.) Give us a snapshot of an image that we can grade a little bit better. (or show me where it is ;-)) 7.) Easy subtitle option (STL Import or whatever - change all the 700 Titles in one go... 8.) The ability to conform to PARTIAL FileNames (would make relinking of fals imported D5 Material from Meda Composer wayyyy easier - since AVID keeps the names but adds a zillion of useless characters at the end) 8.a) straight forward force relink option. 9.) simple blur functions in text editor 10.) direct output for H.264 for blu ray that we can use directly in Encore (or do we have that?)
I am following Grant's Source and Matte Node tutorials for Smoke 2012 but I can't seem to find the POST Menu in smoke 2013 action. Am I missing something?
i have a Problem with my Autodesk CAD 2012 version. I wanted to write a VBA-Skript, but then there comes up a problem i cant solve and i don't know if it's a CAD or a VBA problem. When i make a Userform with a Textbox and run the program i can't write anything into the Textbox. I have the impression the program jumps always from cad to vba and back.I tried it then in excel and in the Microsoft Visual Basic 2010 and there it was no problem.
I have a problem with our new 2013 Theres a long time delay before the File menu wether you hover over it or click on the file button. Same if you use the Autodesk top left button
All the others act as expected i.e. edit, view, insert etc
This is really causing a loss of productivity through the time delay and extreme frustration waiting for it to click in
I want to save Current open Document on remote location (on server).
I am able to save it on my local machine(the machine i am presently working on).
Now I want to save it on some remote server.
I am using following code for that:
var doc=app.activeDocument(); var aiSaveOptions1=new IllustratorSaveOptions(); var aiFile1 = File( '/osn-pc-16/adobe/1/Original.ai' ); doc.saveAs(aiFile1,aiSaveOptions1)
How would one generate a shape (e.g. a roto'd shape that is tracked) and enable its use as a path for a text write-on?
The text node only has one input and if I set text to write on a path then there is only a straight line to manipulate from scratch - with no options to load or save or connect as far as I can see...
I got that message when I was trying to export a Quicktime movie - although it appears it's going to let me continue to export the Quicktime - I'm hoping it'll have audio when all is said & done. Although I understand the words, I have the following questions:
1. What does it really mean?
2. How will affect me/my life/the Quicktime file I'm exporting?
3. Perhaps most importantly, why is it happening & what can I do to prevent it in the future?
The file I'm trying to export is the same one from the 7-hour Process time thread I posted about on here recently. It's the simplest possible thing:
- 1 Layer of around 15 "reels" spliced together - 1 (adjustment) Layer of a single color correction gap effect that runs the length of the whole timeline (don't think this has anything to do with the problem at hand)
- 1 audio track w/ 2 mono layers, L&R, of a single AIFF soundtrack file
I am also having the "could not write to internet cache" message in Autocad 2013. I have removed and replaced the AcInetEngine19.dll and AcInet Engineps19.dll files with the files in Byron Norales has supplied in these discussion gropups, However I still get the same "could not write to internet cache message" when opening files?
When customizing the screen menus, adding a few icons or pull down menus, when autocad is restarted, Autocad reverts back to the default menu. How can I set this up to retain any menu changes I make.
The Autocad 2013 x86 or x64 is not installed on Windows 8 Consumer Preview because programs can not read .NET Framework versions 2 and 4 which are integral parts of the OS.
I have a brand new workstation and only on certain files it will say FATAL ERROR: Cannot write to undo file (probably disk full) when ever I save. I have tried cleaning out the TEMP file, turning off the Undo function, auditing the file and its xrefs, and recovering the file. It was a file that was on the server, but I have pulled it to my local machine and I have also increased the amount of virtural memory avaiable.
The AutoCAD LT 2012 crashes when I try to copy certain features to different locations. The size of the drawing file is about 3.2 MB. The error message reads as below
FATA ERROR: Cannot write to undo file (probably disk full).
Error: Unhandled Exception
There were some messages posted earlier in regard to this error. Most suggested cleaning temp directory, having more RAM, more graphics memory, etc. I have done everything but I could not overcome this problem. My system specifications are
16GB RAM, Windows 7 (64-bit), More than 100GB free disk space, NVIDIA GEforce GT-120 (512 MB).
Max 2013 now can't read or write final gather maps. I get an error cannot open map file. I have tried using a unc path \server name. I had the problem previously whan I moved to win 7 and I got around it by turning off my UAC. But that is off.
I want to write content of variables to a text file but I should have conversion function for variables.
for example
(setq a 123); a is an integer type, contetnt of a is 123
so I should use (itoa a) to get "123" as a string and then I can write it to text file.
but what about another type of variables?
(defun ToString ( a / result)(setq result "")(cond((= (type a) 'ENAME) (progn (setq result "Entity names")))((= (type a) 'EXRXSUBR) (progn (setq result "External ObjectARX applications")))((= (type a) 'FILE) (progn (setq result "File descriptors")))((= (type a) 'INT) (progn (setq result (itoa
