Photoshop :: Saving A File - Write Protected
Nov 12, 2013I am using the photoshop cs6 cc trial and after editing I try to save file but it gives me an error message and says something about write protection.
View 1 RepliesI am using the photoshop cs6 cc trial and after editing I try to save file but it gives me an error message and says something about write protection.
View 1 RepliesOriginally was using Vs10 when most of my discs would only get to 58% and go no further, threw away many discs thinking they were the problem. Have now upgraded to VS11.
The solution is to get hold of a small (free) utility called FixVTS from here: [URL]
I am building a standalone VB app to edit block attribute values. It works fine until I try to save the drawing(s) and ACAD give this message.
By the way. Only happens when I try to save it from VB. In ACAD I can open and save fine.
i install autodesk remote to try it out from home. when i went to my office to the actual work station i rebooted my machine and now im getting a popup box that says my menu file is write protected. i uninstalled the file, and rebooted my machine and im still getting this warning that my menu is write protected,. no other work station is getting this error, the menu file is a shared file running off a network and no other versions exists on my hard drive.
View 2 Replies View RelatedI am currently using Civil 3D 2013, and when I do a qsave, my drawing gives me the following error dialogue box.
"Drawing File is Write Protected" - I am the only on in the files, so now my file is currently Read Only - then I am able to re-open the same file as the same time I have the currently read only version open.
I am getting this currently after or during Plan Production, creating sheets, and I do a qsave.
I am using Civil 3D 2013 Hotfix 1
Windows 7 64 bit system
12GB Ram
Quad Core Xeon 3.2
Server is using Microsoft Server 2008
Receiving a "The media is write protected" error. Seems like I can do certain edits but so far I know I can't use my liquify tool.
View 2 Replies View RelatedAfter some fooling around with LR4, I went out and bought Martin Evenings PSLR4 'book', did some read and started looking for a photo to play with...
I discovered that all of the photos on my usb hard drive were either write protected or the image type was not supported-they're all .jpg. I had done some Copyright stuff on a few photos the day before...fooled around with import and export and some other exploring.
I am getting some unknow error in autccad and error details are as below
System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at System.Windows.RoutedEventArgs.set_Source(Object value)
[code]....
I'd like to format the memory stick that Inventor was shipped on. (Don't need it anymore) But when I tried to format the stick I got a error "The disk is write protected". Is it not possible to format the disk? I rather reuse it than throw it in the thrash..
View 9 Replies View RelatedI get this error "sometimes". It really doesn't seem to have any pattern, i run the calculation several times, it always stops at different point or it finishes successfully.
only connection is the method. It's always at Autodesk.AutoCAD.DatabaseServices.Entity.IntersectWith(Entity entityPointer, Intersect intersectType, Point3dCollection points, IntPtr thisGraphicSystemMarker, IntPtr otherGraphicSystemMarker)
Premier Pro on a MAC.
Error code:
Scratch disks are write protected or unavailable. To open this project,, the scratch disks will be set to your Documents folder. Would you like to continue?
I have a brand new workstation and only on certain files it will say FATAL ERROR: Cannot write to undo file (probably disk full) when ever I save. I have tried cleaning out the TEMP file, turning off the Undo function, auditing the file and its xrefs, and recovering the file. It was a file that was on the server, but I have pulled it to my local machine and I have also increased the amount of virtural memory avaiable.
View 3 Replies View RelatedWhen I try to save edited changes elements 12 says "write access denied". How do I change that?
View 1 Replies View RelatedI am using PSE 11 on a macbook pro and am experiencing difficulty saving an edited file to an external disc drive. I keep getting an error message 'Could not save as “2011-08-04_0_edited-1.jpg” because write access was not granted.'
View 2 Replies View RelatedIs it possible, in AutoLISP, to code something that will save the current file (whatever it may be, assume ..dwg or .dxf, into R2000 .dxf?
View 9 Replies View Related1) Can I use photoshop SDK to build independent desktop app (not photoshop plugin) to read/write/edit psd file? If yes, is there any license rule I must follow?
2) Can I use photoshop API to build more module to read/write/edit psd file,
then use this core module to build complete web-based app with wonderful flex as front-end and that core module is back-end?
If both above 2 items it not capable of implementing, is there another way to build independent desktop app or web-based app for read/write/edit psd file?
I am building a new computer and have heard that, no matter how much RAM you have, Photoshop always writes the scratch file to a disk. Thus, considering a second small SSD drive to use for scratch and Windows page. Other people have said that if have enough RAM, Photoshop never uses disk. Which is true?
View 1 Replies View RelatedI wonder if it is possible to change the name of a file to a text layer automatically. is an example of what I'm trying to do.
I have a lot of photos then I intend to make a macro for editing it to make more precise the name of the file is saved in the image.
I open a PS file. I chose 'Save As' but uncheck 'Show Layers' in the dialog box. So now it's essentially a 'Save A Copy'. When the new file is saved the original file is written to (although nothing changed) and now has the same modification date as the 'Save A Copy' file. Super strange and causing issues. Because if one flattens or does anything to the original file, those changes are baked into the original file!
Mac OS 10.7.3
iMac i7 3.4GHz
32 GB RAM
256GB internal SSD (scratch disk)
1 TB internal SATA (system/data disk)
ColorEdge CG275W main monitor via Thunderbolt
Photoshop 12.0.4
Nik ColorEFX Pro 3.x
Onone Perfect Resize Pro 7.x
Error of "Could not save (file name) because write access was not granted. The users are pulling the files from a Mountain Lion server. They all have readwrite access. If they try to save the file in the same directory they get that error but they can save it anywhere else on the sharepoint. If they save it in another directory then reopen it make a change and do a save as they can save it back to the original directory.
View 2 Replies View RelatedI connect my hard drive to compuuter, I open raw files in bridge load a file into ps, after which I would like to elaborate the new hard drive to save it, but it opens a window that says'' can not save the file because it was not granted write access.''
View 1 Replies View RelatedDuring import of files into LR and you can rename them and write the gps data into the new file name. Is there any real use for this feature? Writing the coordinates into the file name creates just a long name and what else...?
A review of Panasonic Lumix DMC-FT3 says, that their gps programm gives not only the data, where the picture was taken, but the sights in the area as well. Is this program available outside the Panasonic environment, too? (I'm using Nikon).
I am a c# programmer. i am now doing id card application project ....so i need to write text and save image inside .cdr file using c#.
View 1 Replies View RelatedWith prior versions of VideoStudeo I could create a movie and write it to a folder instead of a desk. I used this to preview movies before burning them. How to do this in X3. Neither DVD Factory nor Burn have this option.
View 6 Replies View RelatedAutoCAD LT 2012
I had my automatic save set up for every 10 minutes but files were not being saved regularly. I deleted files from the Temp folder thinking it was full and now there are no .sv$ saving at all. How can I make drawings save automatically every 10 minutes?
I'm trying to create a script which will write the filename in/on an open image itself
I recorded a script which
draws a rectangle
merges it down
writes/types some words on the rectangle
and merges that down
Rather than type the same thing in each image, I'd like to write the file name instead omto the image
The applicable section of script seems to be:
Select all # Text
App.Do( Environment, 'TextEx', {
[A number of text tool parameters omitted]
},
[Code]....
The key line seems to be that: 'Characters': u'File Name Here?',
(the 'File Name Here' was, of course, what I typed in with the Text Tool
And I'm thinking I somehow have to use App.TargetDocument.Title, perhaps as a variable or system variable, but I have not been able to figure out how to do it.
I'm pretty good with WordPerfect's PerfectScript, and can sometimes muddle my way though some JaveScript, but this is beyond my ability
I will be processing thousands of files ovcer time, typically 100-500 at a time....
I use CS PS6, but installed PS Elements & Premiere Elements for a friend. Now I have a whole raft of fonts that I don't want, & don't need, Arabic, Korean, Hebrew and who knows what else. I can't delete them, "Protected system files" the warning says. And there are others, like ADMUI2LG Regular, are those needed for functionality? No Koreans or Arabs are ever going to use this machine, unless it's stolen perhaps, and I'm not being racist, I just want to cut the cr*p. If I use File Assassin to delete them will CS 6 stop working? Or will Big Brother System just recreate them?
View 6 Replies View RelatedWrite an lisp file that would embed a tif image
View 5 Replies View RelatedThe AutoCAD LT 2012 crashes when I try to copy certain features to different locations. The size of the drawing file is about 3.2 MB. The error message reads as below
FATA ERROR: Cannot write to undo file (probably disk full).
Error: Unhandled Exception
There were some messages posted earlier in regard to this error. Most suggested cleaning temp directory, having more RAM, more graphics memory, etc. I have done everything but I could not overcome this problem. My system specifications are
16GB RAM, Windows 7 (64-bit), More than 100GB free disk space, NVIDIA GEforce GT-120 (512 MB).
I know how to write a single line of text to a txt file with LISP, but how do i write two or more lines of text to a txt file ussing lisp?
View 4 Replies View RelatedI want to write content of variables to a text file but I should have conversion function for variables.
for example
(setq a 123); a is an integer type, contetnt of a is 123
so I should use (itoa a) to get "123" as a string and then I can write it to text file.
but what about another type of variables?
(defun ToString ( a / result)(setq result "")(cond((= (type a) 'ENAME) (progn (setq result "Entity names")))((= (type a) 'EXRXSUBR) (progn (setq result "External ObjectARX applications")))((= (type a) 'FILE) (progn (setq result "File descriptors")))((= (type a) 'INT) (progn (setq result (itoa
[Code].....