I am building a standalone VB app to edit block attribute values. It works fine until I try to save the drawing(s) and ACAD give this message.
By the way. Only happens when I try to save it from VB. In ACAD I can open and save fine.
I am currently using Civil 3D 2013, and when I do a qsave, my drawing gives me the following error dialogue box.
"Drawing File is Write Protected" - I am the only on in the files, so now my file is currently Read Only - then I am able to re-open the same file as the same time I have the currently read only version open.
I am getting this currently after or during Plan Production, creating sheets, and I do a qsave.
I am using Civil 3D 2013 Hotfix 1
Windows 7 64 bit system
12GB Ram
Quad Core Xeon 3.2
Server is using Microsoft Server 2008
i install autodesk remote to try it out from home. when i went to my office to the actual work station i rebooted my machine and now im getting a popup box that says my menu file is write protected. i uninstalled the file, and rebooted my machine and im still getting this warning that my menu is write protected,. no other work station is getting this error, the menu file is a shared file running off a network and no other versions exists on my hard drive.
View 2 Replies View RelatedOriginally was using Vs10 when most of my discs would only get to 58% and go no further, threw away many discs thinking they were the problem. Have now upgraded to VS11.
The solution is to get hold of a small (free) utility called FixVTS from here: [URL]
I am using the photoshop cs6 cc trial and after editing I try to save file but it gives me an error message and says something about write protection.
View 1 Replies View RelatedI am getting some unknow error in autccad and error details are as below
System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at System.Windows.RoutedEventArgs.set_Source(Object value)
[code]....
I'd like to format the memory stick that Inventor was shipped on. (Don't need it anymore) But when I tried to format the stick I got a error "The disk is write protected". Is it not possible to format the disk? I rather reuse it than throw it in the thrash..
View 9 Replies View RelatedI get this error "sometimes". It really doesn't seem to have any pattern, i run the calculation several times, it always stops at different point or it finishes successfully.
only connection is the method. It's always at Autodesk.AutoCAD.DatabaseServices.Entity.IntersectWith(Entity entityPointer, Intersect intersectType, Point3dCollection points, IntPtr thisGraphicSystemMarker, IntPtr otherGraphicSystemMarker)
After some fooling around with LR4, I went out and bought Martin Evenings PSLR4 'book', did some read and started looking for a photo to play with...
I discovered that all of the photos on my usb hard drive were either write protected or the image type was not supported-they're all .jpg. I had done some Copyright stuff on a few photos the day before...fooled around with import and export and some other exploring.
Receiving a "The media is write protected" error. Seems like I can do certain edits but so far I know I can't use my liquify tool.
View 2 Replies View RelatedPremier Pro on a MAC.
Error code:
Scratch disks are write protected or unavailable. To open this project,, the scratch disks will be set to your Documents folder. Would you like to continue?
one of the drawing i forgot my password. Now i am confuse because this drawing is very important in front of me. Here is the attach....my drawing.
View 9 Replies View Relatedour drawings are protected by a password.We have a VB.NET programm to export a drawing without password.
...
Dim securityPar As New SecurityParameters(Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, Nothing)
doc.Database.SaveAs("C:TempTest.DWG", False, DwgVersion.Current, securityPar)
doc.CloseAndSave("C:TempTest.DWG")
...
In AutoCAD Architecture 2009 (Win XP) it works fine.
In AutoCAD Architecture 2011 (Win 7) the drawing is still password protected.
Is it possible, in AutoLISP, to code something that will save the current file (whatever it may be, assume ..dwg or .dxf, into R2000 .dxf?
View 9 Replies View RelatedI have a drawing with dimensions and number (number and text number). I want output (Can select each object) to a file excel. write a lisp do.
View 6 Replies View RelatedIs it possible to write a Macro in the CUI that opens a drawing in Read-Only mode? Limitation : AutoCAD LT.
View 7 Replies View RelatedWrite an lisp file that would embed a tif image
View 5 Replies View RelatedWhen I take the Type tool and draw a text box it simply draws a box with no fill or stroke and I can't type in it. When I simply click with the Type tool, a one-pixel dot appears and blinks like a input cursor, and when I type it blinks like it should be moving but it's not. I can't write any text whatsoever...
View 3 Replies View RelatedI have a brand new workstation and only on certain files it will say FATAL ERROR: Cannot write to undo file (probably disk full) when ever I save. I have tried cleaning out the TEMP file, turning off the Undo function, auditing the file and its xrefs, and recovering the file. It was a file that was on the server, but I have pulled it to my local machine and I have also increased the amount of virtural memory avaiable.
View 3 Replies View RelatedThe AutoCAD LT 2012 crashes when I try to copy certain features to different locations. The size of the drawing file is about 3.2 MB. The error message reads as below
FATA ERROR: Cannot write to undo file (probably disk full).
Error: Unhandled Exception
There were some messages posted earlier in regard to this error. Most suggested cleaning temp directory, having more RAM, more graphics memory, etc. I have done everything but I could not overcome this problem. My system specifications are
16GB RAM, Windows 7 (64-bit), More than 100GB free disk space, NVIDIA GEforce GT-120 (512 MB).
I know how to write a single line of text to a txt file with LISP, but how do i write two or more lines of text to a txt file ussing lisp?
View 4 Replies View RelatedI want to write content of variables to a text file but I should have conversion function for variables.
for example
(setq a 123); a is an integer type, contetnt of a is 123
so I should use (itoa a) to get "123" as a string and then I can write it to text file.
but what about another type of variables?
(defun ToString ( a / result)(setq result "")(cond((= (type a) 'ENAME) (progn (setq result "Entity names")))((= (type a) 'EXRXSUBR) (progn (setq result "External ObjectARX applications")))((= (type a) 'FILE) (progn (setq result "File descriptors")))((= (type a) 'INT) (progn (setq result (itoa
[Code].....
I can't write unicode characters to a text file.
as you know, you can write chars on text screen easily: (write-line (strcat "\U+" "2122"))
but if you want to write chars to a text file, this command does not work: (write-line (strcat "\U+" "2122") TxtFileVar)
Here is a part of my code to test:
(defun C:HexGen ( / d f S w x y z h c)(setq d '("0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "A" "B" "C" "D" "E" "F") f (open "c:\0000-FFFF.txt" "w"))(foreach w d (foreach x d (foreach y d (progn (setq S "") (foreach z d (progn (setq h (strcat w x y z)) (setq c (strcat "\U+" h));;;<===character (setq S (strcat S " " (strcat h " = " c ))) ) ) (write-line S f) ) ) )) (close f)(startapp "notepad" "c:\0000-FFFF.txt"))
What the heck? Brand new machine and new autocad 2012 MEP install.
View 9 Replies View RelatedI am using Civil 3D 2011, and the last 2 days I have been running into this issue. I tried google, and the most recent item google brought up was from May 2011, so I am coming here.
I am trying to import a tab from another drawing, and it does not matter which tab or what drawing, I am getting this issue.
I'm trying to open a file to write to on my external drive, I get this message "bad argument type: stringp nil".
View 8 Replies View Related1) Can I use photoshop SDK to build independent desktop app (not photoshop plugin) to read/write/edit psd file? If yes, is there any license rule I must follow?
2) Can I use photoshop API to build more module to read/write/edit psd file,
then use this core module to build complete web-based app with wonderful flex as front-end and that core module is back-end?
If both above 2 items it not capable of implementing, is there another way to build independent desktop app or web-based app for read/write/edit psd file?
During import of files into LR and you can rename them and write the gps data into the new file name. Is there any real use for this feature? Writing the coordinates into the file name creates just a long name and what else...?
A review of Panasonic Lumix DMC-FT3 says, that their gps programm gives not only the data, where the picture was taken, but the sights in the area as well. Is this program available outside the Panasonic environment, too? (I'm using Nikon).
I am building a new computer and have heard that, no matter how much RAM you have, Photoshop always writes the scratch file to a disk. Thus, considering a second small SSD drive to use for scratch and Windows page. Other people have said that if have enough RAM, Photoshop never uses disk. Which is true?
View 1 Replies View RelatedI am a c# programmer. i am now doing id card application project ....so i need to write text and save image inside .cdr file using c#.
View 1 Replies View RelatedWith prior versions of VideoStudeo I could create a movie and write it to a folder instead of a desk. I used this to preview movies before burning them. How to do this in X3. Neither DVD Factory nor Burn have this option.
View 6 Replies View Related