I've got a Core2Duo Dell with 4GB of RAM running 32 bit XP Pro. My copy of CS3 sees about half of that RAM. I understand there is a "switch" in XP's Boot.ini that allows PS to read more then the 2GB.
I've read the above MS page & I can't figure out what to do.
i have Photoshop CS3 Extended and i have collected about 700 brush sets and have putt them all in the brush folder.
the problem i am haveing is i cant use them all.
what i meen is when i open the brush selection menu i dont have any way of scrolling acros to see them all.
i have taken a screen capture to show you what i see.
I have this text problem. I added a few new fonts to my sys and dont see them when choosing the font.
View 5 Replies View Relatedfor a while now, my photoshop tools wouldnt work. it was only the tools that involved "painting" like the brush tool and quick select. after reinstalling, they would work but suddenly they'd stop again. eventually i figured out that it was the pen for my wacom tablet. every time i used the pen, it would make the mouse not work untill i reinstalled the program. this means that a setting changes (pen pressure or something) when i use the pen and it doesnt change back when i use the mouse. i cant deturmine which setting changes.
View 11 Replies View RelatedIve got Photoshop CS, and none of the hotkeys are working, according to the hotkey settings they're all there and should work.. but none of them do.. not even simple things that should work like cut and paste..
View 1 Replies View RelatedI use laptop to print pictures and graphics.
I send my designs to a commercial printing company. Usual case is, is that the pictures turn out too dark or too lite, and sometimes it is due to the fact that the CMYK colors are overaly saturated causing all these colors layer to overprint and make it come out too dark. On my screen I dont see those oversaturated colors, I see a picture that looks good on screen. When Im using flat color somewhere, I have a swatch book that I use to assign number to each color and so the results are always great. But you cant do that with pictures, with pictures you have no idea. I use a color picker and set it to 5 point average to measure color, but it really doesnt tell me much. How can I measure a whole picture and be able to tell if the output looks oversaturated or undersaturated or too lite or too dark?
i dl the trial i open it up and i open an image a PSD and nothing shows but a black screen
the only time i see the picture is when i hold on the mouse but the soonest i let it go it goes back to black.
After the latest patch installation, Photoshop CS5 ext. (12.1 x64 on windows7 64bit) don't save the files on the PDF format. The message: "the file is already open on other application"
View 6 Replies View RelatedMy prints dont match what i am seeing on the screen when using CS3. I am using windows xp and printing on a epson 7800. I never had this problem before i started using CS3. I have calibrated my monitor.
I have the standard version of CS3 not the extended. I read a arctical that CS3 prints darker then what is on your screen. The solution if you have CS3 extended is to increase lightness just before printing, but what if you dont have the extended version, what do you do?
Im having issues with cs4. When i use a tool (paintbrush, eraser), it randomly applies it somewhere else. For instance when trying to paint precise lines while following and edge the brush will apply itself randomly somewhere else. It always happens when i release the mouse button and then press it to start using again. I could be painting a horizontal line, let off the mouse button, repress it and all of a sudden the brush paints a vertical line 3 inches away!
View 5 Replies View RelatedI like to put © in my file names, but I saw some warning recently about something about it wont work in some browsers.
Does any know the definitive dangers in putting © symbol or a period in files names.
i just got photoshop CS and at the beggining all the filter options workedbut now they dont anymore when i want to make some wind i cant because the button is like gray(cant press it)......
View 7 Replies View RelatedI am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies View RelatedI do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.Â
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 Replies View RelatedThe colors of pictures is much darker when working in photoshop than when I open it normally. And vice versa, I work on images inside photoshop, and I get the colors I want, but once I save it to bmp or jpg or anything else, all the colors are much lighter.
i'm using photoshop 7.
Just upgraded to 32gigs vs the 16 I had and it's working, tested with system reporting programs, etc. And They all show the 32gigs of memory. Went into PS to preferences to change memory usage by PS and it still only shows 14769 of available memory.
Â
Do I need to reinstall PS or what to get it to see the new memory total?
Â
This is on Win 7 64, PS 64
I have an HP Pavilion 730. I have purchased the upgrade to CS4 and it has been working for a while. Now all of a sudden, when I open the program, the computer goes "boink" and a message comes up that says:
The instruction at "Ox77e78804" referenced memory at "0x0at1a1470". The memory could not be written. Click OK to terminate or click cancel to debug program. No matter which one I do, it shuts down CS4 totally?
I have been working on a large group of DNG's and I'm noticing that as I proceed through the edits my computer memory seems to be 'not releasing'. Example: Select photo, process it in RAW, open it in Photoshop CS3, edit, save and CLOSE the image. My computer memory does not seem to be refreshed when I close the image and eventually, after several images, I have to close the application to retrieve the memory. I am running on a PC Vista with 3 gig of memory (max my operating system will work with).
View 21 Replies View RelatedI made a javascript which has to convert and edit 18000 PDF's (pages) to arround 103.000 small images. I use ExtendScript Toolkit 2 to load a small file with all the file locations. Then each file will be opened and edited (one by one). This works fine and there are no real peaks in memory usage.
I let photoshop use arround 1500MB from the 1600 available RAM (Preferences -> Performance). I've never seen the whole system use more then 1200MB (2000MB available).
Despite that there is enough memory, the script stops working with the text "General photoshop error occurred ... this functionality because there is not enough memory (RAM)" in the status bar from ExtendScript.
When I restart the script, it will continue where it stopped and the next file will be converted without a problem.
The PDF file is not the problem and memory usage in general is not a problem.
I have an HP Pavilion 730. I have purchased the upgrade to CS4 and it has been working for a while. Now all of a sudden, when I open the program, the computer goes "boink" and a message comes up that says:
The instruction at "Ox77e78804" referenced memory at "0x0at1a1470". The memory could not be written. Click OK to terminate or click cancel to debug program. No matter which one I do, it shuts down CS4 totally?
When I try to save any of my work in photoshop as a jpeg (not large files-even only 5Mb size ones) it comes up with an error message saying not enough Ram to save. IM using windows xp, I have 2.5Gigs of ram, 100Gigs free space on C drive and 100gigs free space on my other drive (J:). I have checked the scratch disk prefernce and allocated 65% of ram to memory. I have also made my J: drive the number one scratch disk and C:drive as number 2. I have defragged my computer, and made sure no other programs ar running at the same time when im using photoshop. i have checked for viruses and spyware...and it still wont save....
View 3 Replies View Relatedthinking about the following purchase windows vista home premium 64intel 2 duo e7500 [2.93ghz, 3mb l2, 1066mhz fsb]8gb ddr3-1066mhz sdram [4 dimms]512mb ati radeon hd 4350640gb 7200 rpm,sata 3gbs currently have samsun syncmaster 220wm and considering hp w2558hc monitor will this suffice for smooth operation of photoshop cs4
View 3 Replies View Relatedwhen I attempt to use a tool or an adjustment layer, i get a message that the operation can not be performed due to an out of memory condition. this only occurs after i have been processing for an hour or so. when i restart Photoshop (CS3), the problem goes away...for a while. I have 1.1 gigs (70% of total RAM) given to CS3.
View 1 Replies View RelatedI have 1 gig of memory in my graphic machine. I have pshop set to 40% of that memory. How much is too much? What do most of you run as a general %?
View 8 Replies View RelatedI've installed PS CS a week ago and began to use it with stuff from my new
Panasonic FZ20 camera. Tried with .tif and .jpg pictures.
The problem: no matter which kind or size(!) (from 500k to 10M) of pictures
I'm trying to open, it takes it a very long time: opening about 30-40sec,
saving about 2 minutes. At the time the picture is being saved, the PC just
"freezes". I'f I'm waiting, everything returns to normal, but if I'm clicking
Alt-Ctrl-Del, PS stops and I have to open it again.
I'm using a relative powerful machine, P4 3.2, Asus Mobo and Asus 9200 video
card, 1G Mem, 300G HDs (defrgmented...) XP SP2 and so on...
Maybe there is any setup I'm missing at PS ...
At least, I can focus on the REAL Problem :
1. Ctrl-alt-del --> Processes
2. Turning on PS. --> It takes about 40M mem.
3. Opening a new file, about 35 x 25 inches and begining to scribble. -->
the memory it uses begins to "grow" up to 240M and then the proggie stops
responding. CPU at 50%.
4. Leaving it for about 5 min. and returning, it works (still using about
240M memory...) but it freezes every several seconds. The memoy is freed
only by turning the program off.
when I try to render clouds in either PS CS 2 or CS I get this error.
I have reinstalled CS still same message, removed it and put CS 2 on it and still got the same message I have removed all the files and tried to put one of the versions back on here still same message.
System specs
Celeron 2.2ghz
768mb of ram
35 gb hard drive Drive C:
(10.7gbs used space 24.3gbs free space)
2.9 gb hard drive Drive D:
(13.3mb used space 2.8gbs free space)
XP Home Service Pack 2
A error has popped up saying:
Â
Could not complete your request becasue there is not enough memory (RAM).
2008 MacBoo Pro with the NVIDIA GeForce 8600M GT 512 MB graphics card tried running Photoshop CS6 under Mac OS X 10.7.4?
Â
On my MacBook Pro, PS CS6 launches; however, any action results in an out of memory error. The CS6 versions of After Effects, Premiere Pro and Illustrator all launch and run as expected under 10.7.4.
Â
If I switch to my Mac OS X 10.6.8 startup volume, Photoshop CS6 runs as expected. I have support cases open with Adobe, NVidia and Apple. Adobe thinks I need to update the display drivers. NVidia says display drivers must be provided by Apple. Apple says that the display drivers are current. The Apple support agent said that he can escalate the case if the issue can be reproduced on more than one computer.
Â
I'd love to keep my MacBook Pro running another year or so without having to reboot in 10.6.8 every time I need to use Photoshop. I'd stay with 10.6.8, but of course iCloud requires 10.7.4. I have not tried Mac OS X 10.8 yet, but it's on my troubleshooting list.
Also, PS CS6 runs fine under Mac OS X 10.7.4 on my 2010 iMac.
It was already a problem with CS4 but it's worse with CS5. Under CS4 it was regularly necessary to me to relaunch the appli to empty the memory (even without image, after use, CS4 indicated n Giga in the window of the processes)The same phenomenon with CS5, but moreover, if I have some one about ten images in display, in the course of processings the functions spend in break the time to put in memory (swap) of the data on the hard disk... In the course of this type of processing I exceed hardly 5 Go...For information I work under Vista 64 bits - 24 Go of lively memory (17 available Go for Photoshop), processor Intel I7 930It seems to me that there is no reason that Photoshop keeps(guards) in memory history after closure(lock) of a photo!
View 6 Replies View RelatedI used Photoshop CS6 without problem until now. Now I dont have enought ram , still cpu processing, freezing and delete my UI layout. I cant work with this I have Core2Quad, 8GB ram, GeForce 250 GTS with Windows 8. Latest driver I also tried beta version and older version. Clean settings, disable opengl, reinstal photoshop, install 32 bit of photoshop I tried everything. All my programs (AE, Premiere, Softimage) works perfect. I dont use any plugins. Also tried compatibility mode. Now it looks that I have to reinstall windows.
View 14 Replies View Related