Photoshop :: Printing Problems With CS3- Prints Dont...
Feb 12, 2009
My prints dont match what i am seeing on the screen when using CS3. I am using windows xp and printing on a epson 7800. I never had this problem before i started using CS3. I have calibrated my monitor.
I have the standard version of CS3 not the extended. I read a arctical that CS3 prints darker then what is on your screen. The solution if you have CS3 extended is to increase lightness just before printing, but what if you dont have the extended version, what do you do?
View 6 Replies
ADVERTISEMENT
Jan 9, 2013
I am having trouble getting good prints when printing out of CS5. I have taken all of the calibration and profiling steps and my prints are coming out very dark and muddy.Â
I am printing on an Epson Pro 7800 and I am a Mac user (OS X 10.6.8). I contacted Epson and they suggested printing out of Preview and the images looked far better which, they suggested, points to something in Photoshop that is causing the problem.Â
View 6 Replies
View Related
Aug 17, 2006
I have decided to print some of my digital pictures; how do you crop pictures in Photoshop while keeping the same proportion so they will still work for 4x6 prints. I know how to keep the same proportion when resizing files, just not cropping.
View 5 Replies
View Related
Jan 20, 2013
I print using Lr 3.6 and seem to never get on paper what Lr shows on screen. A case in point is that if I print with no (zero) borders specified in the Layout section of the Print module I get a print which is identical to the one I obtain when I set the left and right borders to non-zero values (e.g. 2mm). This is even though Lr's screen does show no borders in the first case and the expected borders in the second case.
View 1 Replies
View Related
Feb 21, 2013
I have an Imac with Mountain Lion, CS5 and have just replaced my Epson R2400 with an R3000. Now the white background round the image is covered in small cyan and light grey dots. If the image fills the paper, then the margin is affected. But when trying to proof colours I am going through loads of paper as I cannot now print a smaller image on a larger piece of paper, then re-feed the same sheet through with another small image as the paper is now pale blue.
Â
The R2400 was fine for proofing, as the image alone would print and then the printer fed through the remainder of the sheet without printing, leaving the rest of the paper white. I understood from that , that it was most likely a Photoshop issue and some sort of conflict with the Paper profiles. But, I have checked the profiles on my Mac and they are all version 2 profiles. I note that the few profiles that do work without the blue colour do have 'bkpt' in their profiling and that the ones for the paper I actually do use and in fact the majority of the profiles, do not contain 'bkpt'.
View 7 Replies
View Related
Sep 16, 2011
I use a company batch that allows you to batch run scrips and lisp.
The only problem is that my i send my prints to the printer they all get out of order becasue they are sent as indivisal jobs and people look through them to find where there prints have snuck in.
It has just become to annoying and i was thinking there must be a better way.
I was thinking like a vertual printer that the batcher can send the prints to and then transfer them to the printer you want when they are all there.
View 7 Replies
View Related
Jun 25, 2013
Computer is Windows 7 x64 running adobe CS6. The printer is a HP laserjet 3800dn the driver for the printer is PCL5 but it does the same thing printing with the Postscript driver. We have a navy blue color that prints out black for some reason. In the print options right before releasing the job we changed the use Illustrator colors to use Post script colors and it still does the same thing....Prints black where blue is supposed to go on the document. Doesn't matter if it is a .jpeg or plain text. Sending the job to a different printer works which is a Xerox work centre.
View 8 Replies
View Related
Apr 13, 2013
I upgraded to win 8 64 bit and neither Canon nor Ilford have updated their software but I dont know whether that is causing red/orange to be printed as green.
View 1 Replies
View Related
Nov 14, 2013
So I've drawn a 3d model in Autocad 2011 and when I come to print it in either layout or model view I get lines that appear. These lines do not show up in the print preview no do they look like they relate to the model itself, so I can't understand where they are coming from. I have the grid lines turned off and have exhausted everything else I can think of.
See the attached pdf for what I'm talking about.
View 2 Replies
View Related
Apr 3, 2012
I have been using Corel for printing customized shipping labels and flyers in B & W. I use Arial or Times New Roman ttf fonts for printing labels and texts and print out with a laser printer.  I did not have any problem in the past up to CorelDraw X4.  .  All text came out black with X4.  Recently, i upgraded to Coreldraw X5. When I printed shipping labels and texts with X5 in the same way as I have been doing with X4, the labels came out in faint prints. I could not use shipping labels printed with X5  for mailing out.  I repeated installing X4 and X5.  I see that something is wrong with X5. All labels and simple text prints are faint with X5. On the other hand, printing with X4 came out charcoal dark.  I installed X5 on both home and office computers.  Both gave the idential results. My computer runs Windows 7 professional. Printers are HP (office) or Samsung (home) laser printers. How to make prints darker? I am only concerned B & W print (not color because I did not try color printing yet).Â
View 6 Replies
View Related
Mar 19, 2013
I'm having issues printing layouts to full colour. I've Exported to PDF and plotted to a printer and the same things keep happening. The Polylines and hatching keep being faded whilst printing. I've checked lineweights, I've turned off everything to do with fading - even layer managers setting fade slide bar is turned off. I've massed with plot styles and still it is happening.
View 9 Replies
View Related
Jan 21, 2008
i have Photoshop CS3 Extended and i have collected about 700 brush sets and have putt them all in the brush folder.
the problem i am haveing is i cant use them all.
what i meen is when i open the brush selection menu i dont have any way of scrolling acros to see them all.
i have taken a screen capture to show you what i see.
View 3 Replies
View Related
Feb 9, 2005
I have this text problem. I added a few new fonts to my sys and dont see them when choosing the font.
View 5 Replies
View Related
Mar 31, 2009
for a while now, my photoshop tools wouldnt work. it was only the tools that involved "painting" like the brush tool and quick select. after reinstalling, they would work but suddenly they'd stop again. eventually i figured out that it was the pen for my wacom tablet. every time i used the pen, it would make the mouse not work untill i reinstalled the program. this means that a setting changes (pen pressure or something) when i use the pen and it doesnt change back when i use the mouse. i cant deturmine which setting changes.
View 11 Replies
View Related
Apr 18, 2004
Ive got Photoshop CS, and none of the hotkeys are working, according to the hotkey settings they're all there and should work.. but none of them do.. not even simple things that should work like cut and paste..
View 1 Replies
View Related
Jan 22, 2007
I use laptop to print pictures and graphics.
I send my designs to a commercial printing company. Usual case is, is that the pictures turn out too dark or too lite, and sometimes it is due to the fact that the CMYK colors are overaly saturated causing all these colors layer to overprint and make it come out too dark. On my screen I dont see those oversaturated colors, I see a picture that looks good on screen. When Im using flat color somewhere, I have a swatch book that I use to assign number to each color and so the results are always great. But you cant do that with pictures, with pictures you have no idea. I use a color picker and set it to 5 point average to measure color, but it really doesnt tell me much. How can I measure a whole picture and be able to tell if the output looks oversaturated or undersaturated or too lite or too dark?
View 1 Replies
View Related
Nov 12, 2008
i dl the trial i open it up and i open an image a PSD and nothing shows but a black screen
the only time i see the picture is when i hold on the mouse but the soonest i let it go it goes back to black.
View 7 Replies
View Related
Sep 27, 2012
After the latest patch installation, Photoshop CS5 ext. (12.1 x64 on windows7 64bit) don't save the files on the PDF format. The message: "the file is already open on other application"
View 6 Replies
View Related
May 17, 2009
Im having issues with cs4. When i use a tool (paintbrush, eraser), it randomly applies it somewhere else. For instance when trying to paint precise lines while following and edge the brush will apply itself randomly somewhere else. It always happens when i release the mouse button and then press it to start using again. I could be painting a horizontal line, let off the mouse button, repress it and all of a sudden the brush paints a vertical line 3 inches away!
View 5 Replies
View Related
Nov 4, 2007
I like to put © in my file names, but I saw some warning recently about something about it wont work in some browsers.
Does any know the definitive dangers in putting © symbol or a period in files names.
View 9 Replies
View Related
Sep 18, 2004
i just got photoshop CS and at the beggining all the filter options workedbut now they dont anymore when i want to make some wind i cant because the button is like gray(cant press it)......
View 7 Replies
View Related
Jan 6, 2004
The colors of pictures is much darker when working in photoshop than when I open it normally. And vice versa, I work on images inside photoshop, and I get the colors I want, but once I save it to bmp or jpg or anything else, all the colors are much lighter.
i'm using photoshop 7.
View 3 Replies
View Related
Jan 29, 2007
I have recently upgraded from PS7 to CS2 and have not been able to get a decent print since. I used colour mangement with PS7 and had no problems (unfortunately I had a virus and PS7 got trashed as part of the removal of the virus). Whenever I print now I get prints that look to be oversaturated with nasty colour casts. The settings I am using are as follows:-
Print with preview
Colour Management
Print Document (Profile Adobe RGB (1998))
Color handling Let Photoshop determine colors
Printer profile Prem Semigloss 2880.icc
Rendering intent Relative Colorimetric
Black Point Compensation Checked
I then click on Print and select
Epson Stylus Photo 2100
I then click on Properties and select Premium Semigloss Photo Paper from the Media Type.
I then click on Custom and select PremSemi2880 from the dropdown (this has the Color Management set to No Color Adjustment and Photo Quality set to Super Photo 2880dpi. All other settings are unchecked)
I then click on OK and then OK again
When the Print Preview window appears it is horrible (which is what I would expect. It was like that in PS7). When I click on Print, the image looks though it is super saturated just as if the printer driver settings have been applied along with the Photoshop settings.
View 5 Replies
View Related
Oct 2, 2006
i have an image that is 28' wide by 60' high. i have to tile print it, but i have to print it out on film (see thru acetate). it has to be able to print at 1400 dpi. i know how to print at 1400 dpi on adobe photoshop, but i dont know how to tile print on that program. i have the image now in illusrtator, because it lets me tile, but i cant get it to print out for film (1400 dpi). im using a epson 1280 printer.
i really need to be able to tile print this in high resolution on film. anyone know what i can do??
View 1 Replies
View Related
Jun 28, 2013
I am getting lines in my prints from PhotoShop CS6.
Â
My printer is the Canon MX522.
Â
Ive noticed that printing from other *dumb* programs such as Microsoft Paint the images look fine BUT with photoshop the images print ultra fast and have lines. It looks like note taking paper. How do I fix this? I am guessing this is some kind of Printer quality setting????Â
View 7 Replies
View Related
May 28, 2013
I'm using phoroshop cs6, windows 7 and an Epson 3880. When I go to print, the print preview looks good, the paper size is correct but only the lower 1/2 -2/3 of the photo prints.
View 1 Replies
View Related
Sep 27, 2012
I am using CS5 on a Mac printing to an Epson artisan50 but prints turn out too dark. The image on the monitor is correct in all applications including CS5. The prints are correct in other applications but only in CS5 are they too dark.Â
View 3 Replies
View Related
Jun 27, 2003
I'm printing on a epson 200p, and using photoshop 7. When I print on the watercolor paper, my prints have been coming out really dull, and it looks like there's a haze over them.
View 9 Replies
View Related
Oct 9, 2008
I have CS3 and use a 3800 for my work. Whenever I set an image to print the preview displaces the image to the left and up about 1 cm. no other application I have does this.
I am using windows XP on a dual core PC.
View 1 Replies
View Related
Nov 30, 2008
In CS3, I'm having trouble getting my prints to match the appearance on monitor -- my prints are uniformly 1-2 stops too dark, color otherwise is very good. I have calibrated my Dell monitor with Colorvision's Spyder2 colorimeter. Prints are also a hair too dark in CS2, but not as dark.
Photos and Photoshop are in RGB color space. Printer is Epson R2400 with updated drivers I just downloaded and updated into Photoshop. I also downloaded updated ICC color profiles for the Epson Premium Glossy Paper I use.
Printer settings in Photoshop are: Photoshop manages color; Adobe RGB printer profile; perceptual rendering intent; black point compensation "on"; ICM color management; color management set to "Off". I'm using North American Prepress 2 color setting. These are the exact settings Scott Kelby recommends in his "Adobe Photoshop CS3 Book for Digital Photographers" for getting calibrated prints.
View 4 Replies
View Related
Apr 18, 2009
Old: CS3 printing to Epson 3800. New: CS4 prints dark on Epson 3800. Regardless of picture sent over. Same settings as with CS3 and every variation I can think of. Epson 3800 hasn't changed. Only Adobe Photoshop version has. I can print the same pics from (example) Windows picture manager, and what I see on the CALIBRATED screen I see on the Epson, so this isn't an Epson issue.
View 1 Replies
View Related
