Lightroom :: Printing With Or Without Borders Gives Same Prints?
Jan 20, 2013
I print using Lr 3.6 and seem to never get on paper what Lr shows on screen. A case in point is that if I print with no (zero) borders specified in the Layout section of the Print module I get a print which is identical to the one I obtain when I set the left and right borders to non-zero values (e.g. 2mm). This is even though Lr's screen does show no borders in the first case and the expected borders in the second case.
View 1 Replies
ADVERTISEMENT
Sep 22, 2013
Im trying to print 4x6. In the print module there are 4 margins. Each defaults to 0.13 in. This creates a white border. It does not let me slide these to zero.
I have it cropped correctly (4x6 aspect) and have zoom to fill checked.
View 3 Replies
View Related
Sep 8, 2012
I use large sheets of paper in my printer and typically want to print several photos on one sheet. In order to use the entire 19" length of the paper I select "borderless" printing in the printer options of my Epson Stylus Photo R3000 printer. For example, I create a template with five 5x7 photos and two 4x6 photos on one 13x19 sheet of paper. I then want each cell to have a border of 7 pts. I set this in the appropriate print option in Lightroom. I select each photo and drop it onto the appropriate cell. When I print this selection, Lightroom fails to preserve the 7pt borders of the various cells that lie on the outside edges of the paper. It preserves the 7 pt borders everywhere else. This occurs for any possible expansion setting I choose under the 'borderless' selection.
Conversely, if I do not select 'borderless' printing I get double width borders around the outside edges of the paper, single width borders on the interior edges, and therefor I cannot fit the last two 4x6 prints on the paper.
Is this a bug or is there a combination of settings which will give me what I want.
View 2 Replies
View Related
Apr 13, 2013
I upgraded to win 8 64 bit and neither Canon nor Ilford have updated their software but I dont know whether that is causing red/orange to be printed as green.
View 1 Replies
View Related
Jul 22, 2010
When I put a jpg (or cpt, png, etc) inside a circle (or whatever) using PowerClip, eventually CorelDraw prints out a thin line in one of the jpg borders. The line is not shown in the "printing visualization" thing. I can work around this issue creating a rectangle the same color as the background and placing it over the "inexistent line". This is not only extremely annoying but also makes me waste resources as I have to print the doc again in order to get rid of the misterious line.
When the line show up seems to be random and not linked to anything in particular, like specifically jpgs or cpts. This doesn't happen everytime, wich makes it difficult to identify wtf may be causing it.
This will explain what's going on:
This is the jpg:
This is the final work:
This is what is printed, note the line on the jpg's top border:
Ok, I didn't actually use PowerClip in that, but it illustrates the point. For some reason the colors f up tho.
It's X5 on a Windows XP computer.
View 5 Replies
View Related
Jun 1, 2013
I have an Epson R3000 and have just started using CS6 every print is coming out slightly reduced with a white boarder,The bleed is at 0.00 and so is the border. I have the printer setting as paper size the same as output paper size. How do I get a print covering the whole area with no border.
View 4 Replies
View Related
Aug 21, 2004
I have an image which i have placed on an A4 document. I have sized it so that I can have it twice on the page, so when i print it i can cut it in half and have two small 'fliers'. I do not understand how to arrange the 'bleed' or 'borders' for printing.
View 6 Replies
View Related
Jan 30, 2014
I have a large project (shirt block pattern) that I need to print as a poster, I'm wondering if there's any way to add a border around each tile when printing, since I can't print to the edges of the paper it would save me having to draw in each border before cutting (to ensure I don't cut the edge crookedly).
View 3 Replies
View Related
Jan 9, 2013
I am having trouble getting good prints when printing out of CS5. I have taken all of the calibration and profiling steps and my prints are coming out very dark and muddy.
I am printing on an Epson Pro 7800 and I am a Mac user (OS X 10.6.8). I contacted Epson and they suggested printing out of Preview and the images looked far better which, they suggested, points to something in Photoshop that is causing the problem.
View 6 Replies
View Related
Feb 12, 2009
My prints dont match what i am seeing on the screen when using CS3. I am using windows xp and printing on a epson 7800. I never had this problem before i started using CS3. I have calibrated my monitor.
I have the standard version of CS3 not the extended. I read a arctical that CS3 prints darker then what is on your screen. The solution if you have CS3 extended is to increase lightness just before printing, but what if you dont have the extended version, what do you do?
View 6 Replies
View Related
Sep 16, 2011
I use a company batch that allows you to batch run scrips and lisp.
The only problem is that my i send my prints to the printer they all get out of order becasue they are sent as indivisal jobs and people look through them to find where there prints have snuck in.
It has just become to annoying and i was thinking there must be a better way.
I was thinking like a vertual printer that the batcher can send the prints to and then transfer them to the printer you want when they are all there.
View 7 Replies
View Related
Jun 25, 2013
Computer is Windows 7 x64 running adobe CS6. The printer is a HP laserjet 3800dn the driver for the printer is PCL5 but it does the same thing printing with the Postscript driver. We have a navy blue color that prints out black for some reason. In the print options right before releasing the job we changed the use Illustrator colors to use Post script colors and it still does the same thing....Prints black where blue is supposed to go on the document. Doesn't matter if it is a .jpeg or plain text. Sending the job to a different printer works which is a Xerox work centre.
View 8 Replies
View Related
Nov 14, 2013
So I've drawn a 3d model in Autocad 2011 and when I come to print it in either layout or model view I get lines that appear. These lines do not show up in the print preview no do they look like they relate to the model itself, so I can't understand where they are coming from. I have the grid lines turned off and have exhausted everything else I can think of.
See the attached pdf for what I'm talking about.
View 2 Replies
View Related
Aug 17, 2006
I have decided to print some of my digital pictures; how do you crop pictures in Photoshop while keeping the same proportion so they will still work for 4x6 prints. I know how to keep the same proportion when resizing files, just not cropping.
View 5 Replies
View Related
Apr 3, 2012
I have been using Corel for printing customized shipping labels and flyers in B & W. I use Arial or Times New Roman ttf fonts for printing labels and texts and print out with a laser printer. I did not have any problem in the past up to CorelDraw X4. . All text came out black with X4. Recently, i upgraded to Coreldraw X5. When I printed shipping labels and texts with X5 in the same way as I have been doing with X4, the labels came out in faint prints. I could not use shipping labels printed with X5 for mailing out. I repeated installing X4 and X5. I see that something is wrong with X5. All labels and simple text prints are faint with X5. On the other hand, printing with X4 came out charcoal dark. I installed X5 on both home and office computers. Both gave the idential results. My computer runs Windows 7 professional. Printers are HP (office) or Samsung (home) laser printers. How to make prints darker? I am only concerned B & W print (not color because I did not try color printing yet).
View 6 Replies
View Related
Mar 19, 2013
I'm having issues printing layouts to full colour. I've Exported to PDF and plotted to a printer and the same things keep happening. The Polylines and hatching keep being faded whilst printing. I've checked lineweights, I've turned off everything to do with fading - even layer managers setting fade slide bar is turned off. I've massed with plot styles and still it is happening.
View 9 Replies
View Related
Feb 21, 2013
I have an Imac with Mountain Lion, CS5 and have just replaced my Epson R2400 with an R3000. Now the white background round the image is covered in small cyan and light grey dots. If the image fills the paper, then the margin is affected. But when trying to proof colours I am going through loads of paper as I cannot now print a smaller image on a larger piece of paper, then re-feed the same sheet through with another small image as the paper is now pale blue.
The R2400 was fine for proofing, as the image alone would print and then the printer fed through the remainder of the sheet without printing, leaving the rest of the paper white. I understood from that , that it was most likely a Photoshop issue and some sort of conflict with the Paper profiles. But, I have checked the profiles on my Mac and they are all version 2 profiles. I note that the few profiles that do work without the blue colour do have 'bkpt' in their profiling and that the ones for the paper I actually do use and in fact the majority of the profiles, do not contain 'bkpt'.
View 7 Replies
View Related
Jun 3, 2012
I want to add plain white 300 pixel borders to some photos without losing any of the image, so I'm using canvas resize in Elements one at a time, then back to Lightroom for the next, etc. Is there any way I can expedite this, by making some kind of preset or something?
View 2 Replies
View Related
Dec 13, 2013
Does the Photoshop Edge FX program really only work with CS4, or will it work with LR5 or PsCC? If it won't work is there another easy option for adding borders?
View 3 Replies
View Related
Jun 11, 2012
i have already exported a LR3 slide with borders. however, there is a Lightroom identity plate in the upper left corner. have been able to remove the identity plate but all subsequent exports have been without borders. don't remember how i initially did it. now i can't create borders even with the identity plate. i did read that borders can be created in the print module but that does not explain how i was able to do it in the slide module.
View 1 Replies
View Related
Mar 1, 2013
My prints are getting clipped no matter what I try to do. I am losing approximately 1/8" from all sides of the finished print. From what I can tell, the picture is actually printing larger than the specified size.
This is my process:
In the Develop module I am cropping to the desired aspect ratio using LR presets, then going straight to the print module. My printer is an HP Photosmart C4780. In the Print module I set my margins to 0 and cell size to 4in x 6in. The picture on the screeen looks exactly how I want it to print. I go to Page Setup, select my printer, paper size (borderless 4x6) and orientation, click OK. Then to Print Settings, select the HP paper I am using, click borderless, click save. If I click "scale to fit paper size", I still lose approximately 1/16" on each side. Under Image Settings, I deselect zoom to fill. I have tried selecting it but still experience clipping. I have tried moving the margins in by fractions of an inch and I seem to recover some of the image, but its a long trial and error process that I feel I shouldn't have to do.
A 4x6 test print on regular 8.5x11 paper measures 4-1/8" x 6-1/8". The print layout in LR clearly says 4x6.
View 12 Replies
View Related
Nov 10, 2011
Does the watermark only used for images to be used for web base or put your watermarks on the actual printout?
View 2 Replies
View Related
Dec 15, 2011
how to get rid of the border on 5x7 prints. i've removed them before but can't seem to remember what i did to get the full 5x7 print.
View 1 Replies
View Related
Jan 29, 2009
I have been having problems with uneven stroke borders on my images. If I select say, a 2px border, three sides of my image will have a 2px border while one side will have what appears to be a 4px border. Is this a known LR problem, or is it printer driver related ? Using LR 2.2 and printing on an Epson 3800, latest driver.
View 9 Replies
View Related
Oct 30, 2012
How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies
View Related
Mar 21, 2013
I use the print module extensively and have a large collection of "saved prints".How can I search this list by name ? (My saved prints names include date and original picture name) Browsing the collection in grid view is not very practical.
View 3 Replies
View Related
Aug 24, 2013
I print out of Lightroom, monitor and printer calibrated with Colormunki. Soft proof with the paper profile looks fine (whether the manufacturer's or mine).
Print into jpeg file - looks fine..Print to printer with identical profile - colors don't match. It makes a significant difference whether perceptive or relative is chosen in color management, but in both cases colors just don't match. Perceptive - colors look completely different, relative - most colors are good, but deep black shadows for example are dark grey instead of black.
Printing the colorsamples for the colormunki - all colors look perfect.I've spent a fortune meanwhile on paper and ink..
View 13 Replies
View Related
Oct 1, 2013
I have profiled my monitor and my printer. I can print from photoshop and prints match my display. When I print out of lightroom, they are not even close. I use the same printer profile and the program manages the color.
View 10 Replies
View Related
May 27, 2013
I have used LR 2 in the past with Windows 98 and an HP Photosmart Pro B9180 shooting with Pentax k10d using DNG files and printing with few or no problems with minimal developing. I am now trying LR 4 with the same printer and camera but with Windows 7 and with little or no changes in developing the prints are very dull and almost black. I have the latest driver updates and am have the printer letting the application manage the color with the correct setting in profile.
View 5 Replies
View Related
Dec 1, 2013
I am trying to print an US Letter sized print, no matter what I do in the page setup and print settings, it still comes slightly off center, top and bottom are goo, but the print area is offset about 1/8" to the left?
View 1 Replies
View Related
Jan 17, 2014
I have an Imac running Maverick and an Epson 3880. I have calibrated my monitor, my printer and my paper with a ColorMunki. I use ProPhoto for all apps. All settings the same in both PS and LR.
If I print an image in LR 5 and then export the same image to PS and print it (all settings the same), the PS image is almost spot on. The LR5 image is very bad, being much darker and bluer.
View 1 Replies
View Related
