Ive got Photoshop CS, and none of the hotkeys are working, according to the hotkey settings they're all there and should work.. but none of them do.. not even simple things that should work like cut and paste..
View 1 Repliesfor a while now, my photoshop tools wouldnt work. it was only the tools that involved "painting" like the brush tool and quick select. after reinstalling, they would work but suddenly they'd stop again. eventually i figured out that it was the pen for my wacom tablet. every time i used the pen, it would make the mouse not work untill i reinstalled the program. this means that a setting changes (pen pressure or something) when i use the pen and it doesnt change back when i use the mouse. i cant deturmine which setting changes.
View 11 Replies View Relatedi just got photoshop CS and at the beggining all the filter options workedbut now they dont anymore when i want to make some wind i cant because the button is like gray(cant press it)......
View 7 Replies View Relatedi have Photoshop CS3 Extended and i have collected about 700 brush sets and have putt them all in the brush folder.
the problem i am haveing is i cant use them all.
what i meen is when i open the brush selection menu i dont have any way of scrolling acros to see them all.
i have taken a screen capture to show you what i see.
I have this text problem. I added a few new fonts to my sys and dont see them when choosing the font.
View 5 Replies View RelatedI use laptop to print pictures and graphics.
I send my designs to a commercial printing company. Usual case is, is that the pictures turn out too dark or too lite, and sometimes it is due to the fact that the CMYK colors are overaly saturated causing all these colors layer to overprint and make it come out too dark. On my screen I dont see those oversaturated colors, I see a picture that looks good on screen. When Im using flat color somewhere, I have a swatch book that I use to assign number to each color and so the results are always great. But you cant do that with pictures, with pictures you have no idea. I use a color picker and set it to 5 point average to measure color, but it really doesnt tell me much. How can I measure a whole picture and be able to tell if the output looks oversaturated or undersaturated or too lite or too dark?
i dl the trial i open it up and i open an image a PSD and nothing shows but a black screen
the only time i see the picture is when i hold on the mouse but the soonest i let it go it goes back to black.
After the latest patch installation, Photoshop CS5 ext. (12.1 x64 on windows7 64bit) don't save the files on the PDF format. The message: "the file is already open on other application"
View 6 Replies View RelatedMy prints dont match what i am seeing on the screen when using CS3. I am using windows xp and printing on a epson 7800. I never had this problem before i started using CS3. I have calibrated my monitor.
I have the standard version of CS3 not the extended. I read a arctical that CS3 prints darker then what is on your screen. The solution if you have CS3 extended is to increase lightness just before printing, but what if you dont have the extended version, what do you do?
Im having issues with cs4. When i use a tool (paintbrush, eraser), it randomly applies it somewhere else. For instance when trying to paint precise lines while following and edge the brush will apply itself randomly somewhere else. It always happens when i release the mouse button and then press it to start using again. I could be painting a horizontal line, let off the mouse button, repress it and all of a sudden the brush paints a vertical line 3 inches away!
View 5 Replies View RelatedI like to put © in my file names, but I saw some warning recently about something about it wont work in some browsers.
Does any know the definitive dangers in putting © symbol or a period in files names.
The default hotkeys for increasing/decreasing the paintbrush size is [ and ] -
but these hotkeys do not work on my PC
Is there another way of changing the brushsize via hotkeys ?
I thought about actions but there is no menu command for brushsize-decrease/ increase.
I'd like to assign hotkeys for 10 or twelve different Tools I've customized and preset, including smudge, brush (various), selection, etc... I'd like to do this without using and action since they have limited assignable keys (F keys), and it would be great if they were centered around asdf keys.
Â
The best I've been able to come up with is to have the tools panel open, press a hotkey and bring up a custom SET of presets, but this still doesn't make the current tool a specific tool, I still have to select from the panel.
Â
Is this possible in CS5 or CS6?
Why do the hotkeys randomly stop working? Simple ones, like the move tool or the marquee tool.
Â
The only fix i've found is having to CLICK on the tool and then the hotkeys will work again...it's really annoying - never happened in cs5...
if there was a way to disable the hotkeys that PSP7 provides. Occasionally when I'm using PSP, I dont know what I click, but the hotkeys are activated. Its a hassle trying to use the text feature and trying to save the file: windows are popping up and toolbars disappear off the screen. The only solution that I've found was to close the program and open it again. I'd rather avoid the hassle of closing all of my files and opening them again.
View 1 Replies View RelatedStrange bug: CS4 or graphics driver? At one resolution (1280 x 768) only, the following happens. Select the combination of Cntl M to get the curves adjustment panel and instead you get the Eyedropper, and the program locks up. "I" also gets the eyedropper, but it doesn't lock up. Select curves through the menu and the same thing happens: eyedropper, all menues grayed out, Cntl Alt Del to kill the CS4 process.
The other resolutions that the screen can handle - up to . 2560 x 1600 - work nominally.Windows build - v.5.1.2600.2.Service Pack 3Attached monitor - HP LP3065 Wide LCD Monitor (HP)Graphics card NVIDIA FX 3700
Photoshop CS5...For whatever reason the hotkeys for controling brush opacity and flow switch randomly, and its a bit frustrtating in my work flow.For the hotkey for Opacity will atlernate between 0-9 and shift + 0-9
Â
The hokey for Flow will alternate between 0-9 and shift + 0-9 as wellOne project I will be used to useing shift + 0-9 to adjust the flow, but in the next document it will alter opacity instead.
We tried to use the WhatTheFont function in coreldraw x5 and it popped up with:"This hotkey is being used already by this system Please choose another one."
I worked out that it was an error from capture x5 and when I loaded that to change the hotkey, no matter which one I picked it popped up the same error when trying to capture.
I even tried some ridiculous ones like Ctrl+Alt+[Letter] and still got the error.This is running on a Windows 7 64 bit computer with Corel SP3 installed
I can't seem to be able reassign the hotkeys around in Max anymore (no matter how hard I try).I was able to create a Quad for Shift+Z, but when I try it reassigning the same Quad or a new one on Shift+X or any other letter, it doesn't work for some reason. I tried at this point on ALL the combos, and it seems like Max actively refuses to assign anything to any quad menu.
It seems like after assigning my first new Quad, it doesn't want to do anymore changes
Basically at some point or another, maya swaps back to the default hotkey layout. Im not quite sure how or why. Sometimes it takes an hour before the problem arrives, other times minutes. Its not permanent tho, restarting the app will fix it.
I've tried deleting second language, installing keyboard software, searching for alternative pref. files etc., and no, capsLock is not on ^^.
If there is a way to set hotkeys for the steering wheel functions like 'orbit around pivot' and the steering wheel zoom (which is different from the normal zoom).
Using the steering wheel is WAY too slow, so it would be great if it was possible to map these functions to hotkeys.
As the topic states, I would like to assign hotkeys to mouse buttons. I attempted to do so, but when I use a mouse button for a hotkey it does not register within the customize user interface menu.
View 3 Replies View RelatedI just switched from max 2011 to 2012 yesterday. when i am poly modeling, pressing 1-5 changes the selection from vertex, face etc.. , but re-pressing the number key doesn't de-select the sub-object lvl, i have to click the icon to deselect all. Is there some option i'm missing?
View 4 Replies View RelatedToday, I decided to give Maya a try. After I installed the program, I created primitive polygons and played with the program a bit. Everything worked fine. However, I have a few problems. The shortcut keys aren't working. It's valid to say that the problem is occurring because the hotkeys aren't set. I checked the hotkey editor interface and determined that all the hotkeys are set. Consequently, the problem isn't occurring because the hotkeys aren't set. Also, right mouse click doesn't bring up a menu. Is there an option to toggle hotkeys that I don't know about?
View 1 Replies View RelatedSo I open up Gimp after installing the new Maverick operating system on my iMac, and now for whatever reason I can't use my keyboard without it activating the hotkeys.. So If I'm trying to rename a layer or even save my project, the only letters that I can actually type are the ones that have not been assigned a hotkey. Basically I have a bunch of new files named "vvv" or "ggjg" filled with layers that I can't organize by name, which is slowing me down considerably!
View 1 Replies View RelatedIn previous GIMP versions, I was able to assign a keyboard shortcut to "paste as new layer", but I don't see that in the list of keyboard shortcuts available in 2.8. Is that option really gone? Is there some way to open it up again? My workflow is seriously shredded without that shortcut.
View 1 Replies View Relatedis there a hotkey for making selections bold or italic?
View 7 Replies View RelatedThe colors of pictures is much darker when working in photoshop than when I open it normally. And vice versa, I work on images inside photoshop, and I get the colors I want, but once I save it to bmp or jpg or anything else, all the colors are much lighter.
i'm using photoshop 7.
I really want to change some hotkeys to resemble my DAW's keys.
like "s" for split, and "w" to go back to start.
the keys in this program are a little bit awkward and I bought graphics studio for the ability to customize, I figured that you would be able to customize any corel product like that...
is there a list of all the shortcuts available at least?
We tried to use the WhatTheFont function in coreldraw x5 and it popped up with:
"This hotkey is being used already by this system Please choose another one."
I worked out that it was an error from capture x5 and when I loaded that to change the hotkey, no matter which one I picked it popped up the same error when trying to capture.
I even tried some ridiculous ones like Ctrl+Alt+[Letter] and still got the error.
This is running on a Windows 7 64 bit computer with Corel SP3 installed in a domain environment
My workstation had a major reset and my customization (retrofit) making my group lock key-combo [Ctrl+Shift+A] as it had been some time in the past is lost. It has been so long since I meddled with setting hotkeys that I cannot remember where that is done. I either need to know how to toggle the group lock in the "out of the box 2012" or where to set my hotkey prefs.
It is said that a fool's voice is known by multitude of words... I'm just writing this stuff instead of saying it outloud... that's my loophole.
Windows 7 Professional 64-bit - Service Pack 1
Intelï´¾Rï´¿ Coreï´¾TMï´¿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1