If there is a way to set hotkeys for the steering wheel functions like 'orbit around pivot' and the steering wheel zoom (which is different from the normal zoom).
Using the steering wheel is WAY too slow, so it would be great if it was possible to map these functions to hotkeys.
I have modeled a car and rigged it fully with roll, till, steer, and wheels spinning. Then I realized that my steering wheel wasn't involved in the animation and when I linked it's rotation to the rotation parameter of the steering wheel to the x position of the steering rig (the red circle in front of the wheels) the steering wheel rotates in a rather bizarre way. So I tried everything I could find on the net to solve this problem, from turning the rotation from Euler to TCB (that didn't work), then I added a dummy into affect and that didn't work either.
I rotated the dummy inline with the steering wheel and aligned it's pivot points to the steering wheel, the wheel seems to rotate nicely when I rotate the dummy. But it all falls apart once I link up the steering rig to the dummy.
Also to note, it seems impossible for me to select the "wire parameter" option from the steering wheel, it seems I have to originate this link somewhere else to the steering wheel for the link to be made possible. Could it be because the steering wheel was a different file and merged in later on?
My view cube disappeared on me a few days ago and not like its a big deal now when i turn on the edges it shows the triangles in the mesh. So heres the real problem idk how to turn of the triangulation? view? and when i go to views/viewcube or steering wheel the roll out is empty. so i went to the + sign in the viewport and hit configure viewcube checked the box hit ok and nothing happened. could the file for the view cube and wheel somehow have been deleted?
View 3 Replies View RelatedI've looked in the cui file to rebind the Shift+W button. I just migrated from an older Autocad and usually go into the CUI and bind my osnaps to Shift+"whatever key" but for some reason the Steering wheel isnt in the cui keyboard shortcuts.
View 9 Replies View RelatedIs there any way to increase the speed the 'move' part of the look function moves when using the steering wheel?
I really like the idea of being able to navigate fully using mouse & keyboard (kinda like an FPS really) use the mouse to look and the keyboard to move - however the move speed is painfully slow -almost undetectable. I believe is probably due to assumptions made on unit size - (I work in mm).
The steeringwheel settings dialogue allows some adjustment on the 'walk' speed, but that has no effect on the move speed when looking.
When you use the wheel autocad zooms in and out. Is there a way to make it so when you hold ctrl and move the wheel Autocad pans left and right? ANd a shift+wheel pans up and down?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
As stated earlier I am using a Mac book Pro 2.66 Ghz Intel Core i7 / memory 8gb 1067 MHz DDR3 / Running on Snow Leopard 10.6.8 Also
The external hard drive is connected to the firewire port and yes it is 7200RPM 1.5TB
Whenever I do a couple of editing functions with smoke, all of a sudden things freeze up as I see the multi color spinning wheel appear on the Mac, thus causing me to do a force shut down.
Do I need to upgrade the Mac, operating software or?
The problem is that I can't toggle Steering Wheels by pressing shift+W.
View 2 Replies View RelatedWe tried to use the WhatTheFont function in coreldraw x5 and it popped up with:"This hotkey is being used already by this system Please choose another one."
I worked out that it was an error from capture x5 and when I loaded that to change the hotkey, no matter which one I picked it popped up the same error when trying to capture.
I even tried some ridiculous ones like Ctrl+Alt+[Letter] and still got the error.This is running on a Windows 7 64 bit computer with Corel SP3 installed
I can't seem to be able reassign the hotkeys around in Max anymore (no matter how hard I try).I was able to create a Quad for Shift+Z, but when I try it reassigning the same Quad or a new one on Shift+X or any other letter, it doesn't work for some reason. I tried at this point on ALL the combos, and it seems like Max actively refuses to assign anything to any quad menu.
It seems like after assigning my first new Quad, it doesn't want to do anymore changes
The default hotkeys for increasing/decreasing the paintbrush size is [ and ] -
but these hotkeys do not work on my PC
Is there another way of changing the brushsize via hotkeys ?
I thought about actions but there is no menu command for brushsize-decrease/ increase.
Ive got Photoshop CS, and none of the hotkeys are working, according to the hotkey settings they're all there and should work.. but none of them do.. not even simple things that should work like cut and paste..
View 1 Replies View RelatedBasically at some point or another, maya swaps back to the default hotkey layout. Im not quite sure how or why. Sometimes it takes an hour before the problem arrives, other times minutes. Its not permanent tho, restarting the app will fix it.
I've tried deleting second language, installing keyboard software, searching for alternative pref. files etc., and no, capsLock is not on ^^.
As the topic states, I would like to assign hotkeys to mouse buttons. I attempted to do so, but when I use a mouse button for a hotkey it does not register within the customize user interface menu.
View 3 Replies View RelatedI just switched from max 2011 to 2012 yesterday. when i am poly modeling, pressing 1-5 changes the selection from vertex, face etc.. , but re-pressing the number key doesn't de-select the sub-object lvl, i have to click the icon to deselect all. Is there some option i'm missing?
View 4 Replies View RelatedToday, I decided to give Maya a try. After I installed the program, I created primitive polygons and played with the program a bit. Everything worked fine. However, I have a few problems. The shortcut keys aren't working. It's valid to say that the problem is occurring because the hotkeys aren't set. I checked the hotkey editor interface and determined that all the hotkeys are set. Consequently, the problem isn't occurring because the hotkeys aren't set. Also, right mouse click doesn't bring up a menu. Is there an option to toggle hotkeys that I don't know about?
View 1 Replies View RelatedSo I open up Gimp after installing the new Maverick operating system on my iMac, and now for whatever reason I can't use my keyboard without it activating the hotkeys.. So If I'm trying to rename a layer or even save my project, the only letters that I can actually type are the ones that have not been assigned a hotkey. Basically I have a bunch of new files named "vvv" or "ggjg" filled with layers that I can't organize by name, which is slowing me down considerably!
View 1 Replies View RelatedIn previous GIMP versions, I was able to assign a keyboard shortcut to "paste as new layer", but I don't see that in the list of keyboard shortcuts available in 2.8. Is that option really gone? Is there some way to open it up again? My workflow is seriously shredded without that shortcut.
View 1 Replies View Relatedis there a hotkey for making selections bold or italic?
View 7 Replies View RelatedI'd like to assign hotkeys for 10 or twelve different Tools I've customized and preset, including smudge, brush (various), selection, etc... I'd like to do this without using and action since they have limited assignable keys (F keys), and it would be great if they were centered around asdf keys.
The best I've been able to come up with is to have the tools panel open, press a hotkey and bring up a custom SET of presets, but this still doesn't make the current tool a specific tool, I still have to select from the panel.
Is this possible in CS5 or CS6?
Why do the hotkeys randomly stop working? Simple ones, like the move tool or the marquee tool.
The only fix i've found is having to CLICK on the tool and then the hotkeys will work again...it's really annoying - never happened in cs5...
I really want to change some hotkeys to resemble my DAW's keys.
like "s" for split, and "w" to go back to start.
the keys in this program are a little bit awkward and I bought graphics studio for the ability to customize, I figured that you would be able to customize any corel product like that...
is there a list of all the shortcuts available at least?
We tried to use the WhatTheFont function in coreldraw x5 and it popped up with:
"This hotkey is being used already by this system Please choose another one."
I worked out that it was an error from capture x5 and when I loaded that to change the hotkey, no matter which one I picked it popped up the same error when trying to capture.
I even tried some ridiculous ones like Ctrl+Alt+[Letter] and still got the error.
This is running on a Windows 7 64 bit computer with Corel SP3 installed in a domain environment
My workstation had a major reset and my customization (retrofit) making my group lock key-combo [Ctrl+Shift+A] as it had been some time in the past is lost. It has been so long since I meddled with setting hotkeys that I cannot remember where that is done. I either need to know how to toggle the group lock in the "out of the box 2012" or where to set my hotkey prefs.
It is said that a fool's voice is known by multitude of words... I'm just writing this stuff instead of saying it outloud... that's my loophole.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
I am using Autucad 2012.... F3 is osnap and F8 is ortho by default.
Is there anyway I can assign osnap and ortho to other keys like "3" or "G" ?
if there was a way to disable the hotkeys that PSP7 provides. Occasionally when I'm using PSP, I dont know what I click, but the hotkeys are activated. Its a hassle trying to use the text feature and trying to save the file: windows are popping up and toolbars disappear off the screen. The only solution that I've found was to close the program and open it again. I'd rather avoid the hassle of closing all of my files and opening them again.
View 1 Replies View RelatedStrange bug: CS4 or graphics driver? At one resolution (1280 x 768) only, the following happens. Select the combination of Cntl M to get the curves adjustment panel and instead you get the Eyedropper, and the program locks up. "I" also gets the eyedropper, but it doesn't lock up. Select curves through the menu and the same thing happens: eyedropper, all menues grayed out, Cntl Alt Del to kill the CS4 process.
The other resolutions that the screen can handle - up to . 2560 x 1600 - work nominally.Windows build - v.5.1.2600.2.Service Pack 3Attached monitor - HP LP3065 Wide LCD Monitor (HP)Graphics card NVIDIA FX 3700
Pre-release 4 I find my hotkeys stop working after several minutes in the smoke. Switching users does not remedy but restart does.
View 2 Replies View RelatedWhen I am in cfx in action 1-up, I press shift 3 or shift 4 to view side and top view. Nothing happens. What is the correct hotkey (smoke) to show the view. The hotkey suggested does not work. And if you manually select it, it takes quite a while to decide it will change view for you.
View 9 Replies View RelatedI know in the smoke 2012 on OS X you were able to set your keys as Flame. Is this possible in Smoke 2013 beta 5 ?
Also, when in connect FX can you make a hotkey for pan and zoom ? Seems silly that you would have to change that manually every time but I am sure it is user error.
Photoshop CS5...For whatever reason the hotkeys for controling brush opacity and flow switch randomly, and its a bit frustrtating in my work flow.For the hotkey for Opacity will atlernate between 0-9 and shift + 0-9
The hokey for Flow will alternate between 0-9 and shift + 0-9 as wellOne project I will be used to useing shift + 0-9 to adjust the flow, but in the next document it will alter opacity instead.