When I am in cfx in action 1-up, I press shift 3 or shift 4 to view side and top view. Nothing happens. What is the correct hotkey (smoke) to show the view. The hotkey suggested does not work. And if you manually select it, it takes quite a while to decide it will change view for you.
View 9 RepliesPre-release 4 I find my hotkeys stop working after several minutes in the smoke. Switching users does not remedy but restart does.
View 2 Replies View RelatedI know in the smoke 2012 on OS X you were able to set your keys as Flame. Is this possible in Smoke 2013 beta 5 ?
Also, when in connect FX can you make a hotkey for pan and zoom ? Seems silly that you would have to change that manually every time but I am sure it is user error.
Smoke classic shortcut is not working for Schematic vuew in CF, tried on three machines. Also why there is short cat for all "delete" "add" but not just plain move anymore. space M is not working. What's the logic?
View 2 Replies View RelatedQuite possibly user error, but following along with Grants Keying demo, I am unable to make the MasterKeyer in Axis perform a key!
I have a background on v1, green screen shot on v2, select both and apply axis fx. Enable the PreviewFX cache, then in Keyer I switched t Masterk, select the left colour pick and click on the green screen element. All that happens is the swatch turns white regardless of the colour being selected, and the entire video clip is removed to reveal the background.
As far as i can tell, all my onscreen settings are the same as the ones in Grants video.
While in CFX, Action, Text edit, Axis etc, is there a way to see the output of the timeline? I know while in CFX you can set the CFX output as a context but what if I have multiple CFX composites stacked up and I want to see the final output of the timeline while editing or modifying something inside a CFX or Action node?
View 9 Replies View RelatedI cant view my exporting job list . I want to cancel all my current export and make it fresh. My sequence is exporting again and again in same location with same file name. I need a support number in india.
View 4 Replies View RelatedWhen you are viewing the desktop, the view is available in the library and you can see which folder you are viewing. But when you have the player open the view icon disappears.
View 1 Replies View RelatedI am looking for a way to easily view the separate rgb channels as grey values for key pulling on each channel. Also, I am looking for a way to change the viewer gamma value without changing the fx value.
View 4 Replies View RelatedIs there any visual tool in smoke so i can view the alpha/matte and rgb at the same time (by overlaying alpha on top of the rgb) ? I can't find a way to do it. Did i miss something ? or does this tool exist ?
View 6 Replies View RelatedI'm running the trial version of Smoke 2013 (latest version) on a Mac Pro. Going out a Kona Card. SDI out works fine, but I'm not getting a signal out of the HDMI? (I know the cable is good, Final Cut works fine...).
View 3 Replies View RelatedI do a heavy job about an into working on a comp my keyboard will stop working, every once in a while if I cmd + tab out of smoke and back into smoke it will do the same thing, but my mouse always works. The only way to really get the keyboard back to working is by rebooting the app. This is really embarrassing when you are doing supervised sessions and you have to reboot.
View 9 Replies View RelatedI am having some issues with the newly added Sequence Publish function added in Prerelease 4. I have tried using both the built in AAF export option, and have tried a custom DPX image sequence with EDL export. The function is able to do the final sequence render in preparation for the publish, however it doesn't ever actually publish either the DPX sequence or quicktime movies I request it to. I am left with a folder which contains the edl or aaf file, but no corresponding media ever gets written out. When I check the jobs tab in the mediahub, it just shows "waiting" as its status, but it never progresses past that point. I have tried this function on three different timelines with different media, and it still won't write out the publish sequence. I am able however, to export the sequences to a quicktime as I would normally.
View 3 Replies View RelatedTrying to conform Canon C300 MXF media from 3 different drives. My source footage is spread across 3 TB of portable drives, so I'm trying to conform each drive's footage, cache the media, then move on to the next drive.
This mostly worked, but there's about a half dozen clips that refuse to cache for some reason. Everything looks fine when the drive is plugged in - then I consolidate handles, then go to the sequence and choose CACHE MEDIA - Backburner kicks in and says 100% complete.
But then I have to quit Smoke to eject the drives and connect a different one, and when I start Smoke again, MOST of the clips are there, but some of the clips are not. They do not say Unlinked or checkboards - but they are just black. (One time it showed RED frames - WTF??). If I reconnect the HD, the clips show up, so it's obviously still reading it from the portable drive.
Is there an option to force cache individual clips?.
I tried unlinking/relinking thos problem clips, and even Hard Committing the GAP layer above - and those few clips still do not cache - even the hard commit goes black when the drive is disconnected. How is that even possible? Do I need to add an Axis Effect to force a render, then commit those frames?
why the BB would say 100% complete, but not all clips are truly cached?
SmokeUser since 2012
MacPro w/ K3
32 GB RAM
CalDigit HdPro2 RAID
So I have a soft imported clip with cfx applied...right click consolidate handles...and it seems to work...
But then archiving gives a crazy size estimate so I checked handles again...it turns out the handles haven't been consolidated at all. Timeline says it has been consolidated but entering cfx and exiting again the handles come back.
Some of my keyboard short cuts do not work - for example Import (CMD-I), Export (CMD-E) make subclip etc...... things like JKL play work and mark in mark out etc...
Using FCP Shortcuts mode.
I was under the impression 2013 worked natively with AVCHD. I have footage from both a Sony FS100 & 700 and unless I'm missing something I'm coming up empty.
The file structure starts with: AVF_Info & Private
Private navigates to BDMV which navigates to :
Clip Info
Playlist
stream
Of those three selections only stream seems to want to do something but when you select it says it's "loading" but nothing happens...I let it sit for 15 minutes and nothing.
working with AVCHD in 2013? or what am I missing?
Having a few problems after swapping AJA for BMD DeckLink. Latest problem...
Capture from tape works if I manually go in there and set points and Capture, but Auto-Capture doesn't work - never seems to cue up the deck properly. Gets to a 5 sec pre-roll, stutters a bit, then just beeps and stops trying.
I know the tape is fine - I sent the EDL to FCP and captured my clips - but I'd prefer to stay in Smoke, of course...
SmokeUser since 2012
MacPro w/ K3
32 GB RAM
CalDigit HdPro2 RAID
Why not have a swipe option for the Record viewer on the right side in Thumbnail View and allow locking the source thumbnails to sync with each other - Flame style (just no Reel view). If this could be saved with the current folder view it would largely cover a toolset comment I made before plus another great way to edit quickly.
who said that for editing there should only be one source window ? Why not multiples ? In fact, isn't that a large part of editing in the first place ? Allow multiple selections in the thumbnail view and link the sources together, select a point in the timeline and go to town for checking your editorial options.
This is really about gaining a functionality that’s around in AVID and used extensively by editors I’m trying to get on board with considering smoke as a real alternative. The Reel Locking mechanism in Flame is a great tool that could be expanded upon massively and brought into smoke via synched/locked multiple selection in the thumbnail view.
And another - The ability to see an edit as thumbnail view that can be re-arranged so you can group shots per your own liking but still allows drag and drop FX. This would allow another view on an edit that is incredibly powerful for many functions but color correction an obvious one. If you could save these 'views' you could have a fantastic basis for management.
I was wondering if there was an easy way to view individual color channels (Red, Green, Blue) in the viewer, and if so what the shortcuts are. I know you can do this simply in flame but can't seem to find a way to do it in Smoke.
View 3 Replies View RelatedWhen you're in source-sequence mode and push "f15" key (that is "player view mode" shortcut) several times, you can switch between different view modes. One in particular kept my attention: you can output a video frame with 3840x1080 resolution (double full hd), composed by primary output (on the left) and secondary output (on the right).
The strange thing is that these two video streams (primary and secondary) are not in sync: in fact secondary one is always delayed by one frame.
What is the purpose of this view mode? Is it possible to sync primary and secondary output in this particular mode? It would be great, because this way we could finally output stereoscopic 3D in side-by-side mode!
Does large timeline view exist in smoke 2013?
(as does in Flame timeline)
Is the load text "feature" not working in pre2? What Im trying to achieve:
Toolbar (the new tab) -> text/input: none -> Load -> roll down menu to "text file" -> roll down menu to "UTF-8" -> click the text file i've created using TextEdit = nothing happens.
Have i missed something very obvious or is it broken?
In TextEdit i choose to make the text "plain" so i can save it as a UTF-8 but during the load of the textfile smoke "tells me" "Cannot open"
i try to load CFX setups in smoke 2013 but the little triangle near load button is not working........how i can choose replace for loading setups in CFX ?
View 4 Replies View RelatedWhen I have a CFX on a clip and I try to replace media (so I'm replacing the media under the CFX), it doesn't work. It overrights the CFX completely. Is this a bug or am I doing something wrong?
View 5 Replies View RelatedWhen i'm drag the cursor across the connecting line between a clip and a node or between two nodes.
The arrowed line is missing , i can only move the node not able to cut the link between them.
But, how do I enable Snap to Markers in the Timeline View?
View 3 Replies View RelatedIs there a way to mange all of the renders and projects from one place or view?
Is there a good tutroal or write up on managing projects, renders, media, and libraries?
Why doesn't Selecting clips in the "Timing" view in CFX reveal which clip it is the Schematic? I realize there is a very small corresponding number, but a nice yellow surround would be nice.
View 4 Replies View Relatedhow do I switch the vectorscope widget from circular to 3D view? Can this thing be scaled to see it more closely?
View 3 Replies View RelatedAt the moment I am in action building a composite. We I am viewing the entire comp via the default camera, I can see all the effects applied to the comp, but when I switch to perspective view. All the effects are gone.
Is there a way to see the effects why in perspective view?