AutoDesk Smoke :: Using BMD Card - VTR Capture Not Working
Jan 4, 2014
Having a few problems after swapping AJA for BMD DeckLink. Latest problem...
Capture from tape works if I manually go in there and set points and Capture, but Auto-Capture doesn't work - never seems to cue up the deck properly. Gets to a 5 sec pre-roll, stutters a bit, then just beeps and stops trying.
I know the tape is fine - I sent the EDL to FCP and captured my clips - but I'd prefer to stay in Smoke, of course...
SmokeUser since 2012
MacPro w/ K3
32 GB RAM
CalDigit HdPro2 RAID
View 2 Replies
ADVERTISEMENT
Jun 13, 2012
Quite possibly user error, but following along with Grants Keying demo, I am unable to make the MasterKeyer in Axis perform a key!
I have a background on v1, green screen shot on v2, select both and apply axis fx. Enable the PreviewFX cache, then in Keyer I switched t Masterk, select the left colour pick and click on the green screen element. All that happens is the swatch turns white regardless of the colour being selected, and the entire video clip is removed to reveal the background.
As far as i can tell, all my onscreen settings are the same as the ones in Grants video.
View 4 Replies
View Related
Jan 22, 2013
I'm running the trial version of Smoke 2013 (latest version) on a Mac Pro. Going out a Kona Card. SDI out works fine, but I'm not getting a signal out of the HDMI? (I know the cable is good, Final Cut works fine...).
View 3 Replies
View Related
Mar 21, 2013
I do a heavy job about an into working on a comp my keyboard will stop working, every once in a while if I cmd + tab out of smoke and back into smoke it will do the same thing, but my mouse always works. The only way to really get the keyboard back to working is by rebooting the app. This is really embarrassing when you are doing supervised sessions and you have to reboot.
View 9 Replies
View Related
Sep 25, 2012
I am having some issues with the newly added Sequence Publish function added in Prerelease 4. I have tried using both the built in AAF export option, and have tried a custom DPX image sequence with EDL export. The function is able to do the final sequence render in preparation for the publish, however it doesn't ever actually publish either the DPX sequence or quicktime movies I request it to. I am left with a folder which contains the edl or aaf file, but no corresponding media ever gets written out. When I check the jobs tab in the mediahub, it just shows "waiting" as its status, but it never progresses past that point. I have tried this function on three different timelines with different media, and it still won't write out the publish sequence. I am able however, to export the sequences to a quicktime as I would normally.
View 3 Replies
View Related
Oct 17, 2013
Trying to conform Canon C300 MXF media from 3 different drives. My source footage is spread across 3 TB of portable drives, so I'm trying to conform each drive's footage, cache the media, then move on to the next drive.
This mostly worked, but there's about a half dozen clips that refuse to cache for some reason. Everything looks fine when the drive is plugged in - then I consolidate handles, then go to the sequence and choose CACHE MEDIA - Backburner kicks in and says 100% complete.
But then I have to quit Smoke to eject the drives and connect a different one, and when I start Smoke again, MOST of the clips are there, but some of the clips are not. They do not say Unlinked or checkboards - but they are just black. (One time it showed RED frames - WTF??). If I reconnect the HD, the clips show up, so it's obviously still reading it from the portable drive.
Is there an option to force cache individual clips?.
I tried unlinking/relinking thos problem clips, and even Hard Committing the GAP layer above - and those few clips still do not cache - even the hard commit goes black when the drive is disconnected. How is that even possible? Do I need to add an Axis Effect to force a render, then commit those frames?
why the BB would say 100% complete, but not all clips are truly cached?
SmokeUser since 2012
MacPro w/ K3
32 GB RAM
CalDigit HdPro2 RAID
View 4 Replies
View Related
Sep 28, 2012
Pre-release 4 I find my hotkeys stop working after several minutes in the smoke. Switching users does not remedy but restart does.
View 2 Replies
View Related
Apr 22, 2013
When I am in cfx in action 1-up, I press shift 3 or shift 4 to view side and top view. Nothing happens. What is the correct hotkey (smoke) to show the view. The hotkey suggested does not work. And if you manually select it, it takes quite a while to decide it will change view for you.
View 9 Replies
View Related
Jul 7, 2013
So I have a soft imported clip with cfx applied...right click consolidate handles...and it seems to work...
But then archiving gives a crazy size estimate so I checked handles again...it turns out the handles haven't been consolidated at all. Timeline says it has been consolidated but entering cfx and exiting again the handles come back.
View 3 Replies
View Related
Aug 1, 2012
Some of my keyboard short cuts do not work - for example Import (CMD-I), Export (CMD-E) make subclip etc...... things like JKL play work and mark in mark out etc...
Using FCP Shortcuts mode.
View 6 Replies
View Related
Sep 9, 2012
I was under the impression 2013 worked natively with AVCHD. I have footage from both a Sony FS100 & 700 and unless I'm missing something I'm coming up empty.
The file structure starts with: AVF_Info & Private
Private navigates to BDMV which navigates to :
Clip Info
Playlist
stream
Of those three selections only stream seems to want to do something but when you select it says it's "loading" but nothing happens...I let it sit for 15 minutes and nothing.
working with AVCHD in 2013? or what am I missing?
View 7 Replies
View Related
Jul 22, 2012
Is the load text "feature" not working in pre2? What Im trying to achieve:
Toolbar (the new tab) -> text/input: none -> Load -> roll down menu to "text file" -> roll down menu to "UTF-8" -> click the text file i've created using TextEdit = nothing happens.
Have i missed something very obvious or is it broken?
In TextEdit i choose to make the text "plain" so i can save it as a UTF-8 but during the load of the textfile smoke "tells me" "Cannot open"
View 3 Replies
View Related
Jan 29, 2013
i try to load CFX setups in smoke 2013 but the little triangle near load button is not working........how i can choose replace for loading setups in CFX ?
View 4 Replies
View Related
Jul 8, 2013
When I have a CFX on a clip and I try to replace media (so I'm replacing the media under the CFX), it doesn't work. It overrights the CFX completely. Is this a bug or am I doing something wrong?
View 5 Replies
View Related
Feb 26, 2014
When i'm drag the cursor across the connecting line between a clip and a node or between two nodes.
The arrowed line is missing , i can only move the node not able to cut the link between them.
View 2 Replies
View Related
Aug 10, 2012
Smoke classic shortcut is not working for Schematic vuew in CF, tried on three machines. Also why there is short cat for all "delete" "add" but not just plain move anymore. space M is not working. What's the logic?
View 2 Replies
View Related
Apr 23, 2013
Im trying to use the add point tracking feature in the MK/Gmask in action. Is this a bug or has the software changed? I used to be able to add a tracking point, scrub media to where the point falls off, select add, hold down control and move the tracker to a new point and it would work fine.
Today no matter what I do when the tracker jumps to the second selected position it just jumps off screen. It even does this if I dont use the add function and stop a track, move to new location and hit snap? Whats up with that?
View 9 Replies
View Related
Nov 8, 2012
I'm on PR5 and up until today backburner has been working fine. For some reason its stopped. here is the error message from the file I'm trying export:
tddetedit2 2687747392 transcoderMediaProvider.C:312 11/08/12:13:57:26.290 Cannot get type of clip IFFFS-20:/stonefs/YEC_2012/workspace/_Export_121108_133458_1/H_16777343_S_1352399698_U_44950/hires: Library _Export_121108_133458_1 not found
View 1 Replies
View Related
May 2, 2011
when going in to fonts, only Discreet are available. Assume it'a a Path problem, but not sure where everything is. Of, course, would like access to all fonts.
View 5 Replies
View Related
Jul 24, 2012
I lost my driver disc for the capture card of Video Studio 10 Professional. And I can't find it on COREL website, even in Google.
View 14 Replies
View Related
Jan 30, 2014
find a way to import the XML files to fix the digitized look Adobe capture gave my footage.
These are not XML from Final Cut. They are files saved from Media Express, a Black magic design program used for Capturing.
View 1 Replies
View Related
Aug 29, 2013
I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies
View Related
Feb 26, 2013
Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies
View Related
Jan 16, 2014
What is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies
View Related
Oct 2, 2012
I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
View 7 Replies
View Related
Oct 18, 2012
Can Smoke support the OFX architecture?
View 1 Replies
View Related
Jul 10, 2012
Does Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies
View Related
Jan 10, 2014
Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies
View Related
Jan 22, 2013
I am using X5 with win XP, I can select an area for screen capture but the record button is greyed out, nor will the f11 button start a recording.
View 14 Replies
View Related
Mar 26, 2011
I downloaded video studio x4 trial to test drive. I have the upgrade boxed version on the way. I'm running it on my Win7 Home Premium system, 6 gig ram. My camera is a JVC gr-d850 mini DV tape camera. I connect the camera to my computer using a 4-6 pin avi cable. The computer detects the camera with no problem. However, when I open VS x4, it tells me no camera is detected or not connected. My laptop has a 4 pin firewire connection. If I use a 4-4 pin cable between the laptop and camera and open VS x4 it detects the camera with no problem. why the desk top can detect the camera but the software on it can't? And using the laptop instead is not really an option since it is way under powered to handle what I plan to throw at this program.
View 14 Replies
View Related
Feb 15, 2011
Using LR 3.3 Mac version. The Eject After Import check box is checked, but the card doesn't eject after importing.
View 13 Replies
View Related