How can I decide to have all my proxies on one location and full renders on another storage location... I can add more locations, but how to send all proxies to one location and full to another ?
I have calculated some test renders on a small portion of the timeline in order to check things up. Now I would like to delete them and calculate everything at a later time.
Do you know the way to delete renders in order to save hard disk space ? I have tried the "force purge" function, but it didn't delete anything, the "Autodesk media storage" folder is still the same size...
And manually deleting renders in the "Autodesk media storage" folder messes everything up.
Is it possible, on a Finder level, to move project information (like sequences) between machines using Finder? After my current Smoke install has self-destructed without any fix from Autodesk, I need to retreive my work in progress.
I've tried copying the folder from /usr/discreet/project/ into the same location of another system with the same release version but it does not appear in either the launch screen or Media Hub.Can I replace the entire /discreet/ folder with the one from my crashed system to get the project back?
What I don't get is when it says "navigate to the project that contains the clips you want to copy." Does that refer to /usr/discreet/project/<project name>? Because when I navigate to there, I don't see any media to import.
I hit render early in the am to ship out a project for delivery. And in classic Johnny Fegan fashion my mac pro crashes, and won't boot. So my next step is to start the mac in Target Disk mode, via firewire(probably the second worst thing that has happened to me, firewire) and started to backup everything. Due to the fast turn around on the Project, I never had a chance to archive the project.
My current working config(on the mac pro that died) was an internal raid0, and a pci express ssd. The raid is where I keep my local Autodesk Media Storage folder, and the ssd is my system drive(/usr/discreet). I just completed a back up of both folders to my secondary mac pro, with a license of smoke installed, and am trying to open my project on it. I set the backup copy of my old Autodesk Media Storage folder up to be used under the Smoke setup utility, and when I access it in smoke the only option I get is to create a new project.
I was wondering if it's possible to archive Smoke projects via command line as it would be so much convenient.
If so I could create a shell script with my project and library names and just leave it running overnight project after project. Is this possible? Or command line works only for un archiving?
I'm wanting to work on my laptop at home, and my machine at work. I have an external tunderbold SSD array that I want to use. How would I set smoke to save projects to the external drive? Whats the best work flow for this?
Our tech guys installed 2012 late last year, but suddenly all the 2011 projects are gone. But they still come up on WTC and the ManagedFolder's still fat. Any chance of recovery?
I have been learning smoke on various machines and different versions of the prereleases and service packs. I'm using SP2 now and II see older local projects listed in the media hub but they don't show up in the start-up screen listing of projects. how to regain access to these projects?
I lost my mac os hard drive, but my data or clips are in other place, i have a backup folder of discreet folder from /usr/discreet,
i make a new install of snow leopard and smoke 2012, how to relink this projects without restore/archive method, i not archive any file from library menu, I have the discreet folder and metadata in raid disk.
Smoke 2013 looks amazing, but I can't manage to make it work both at my place and at my office. There is a problem with the stone + wire. I'm sure it has to do with the network settings or the host files, but I'm not familiar with these notions.
After archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3 10.6.7 Kona 3G driver 10.3.2 Quadro 4000 driver 256.01.00f03 Cuda driver 4.2.10 Mac Pro (mid 2010) 12 Cores / 24 Gigs CalDigit HD Pro2 (8TB, 723 MB/sec read)
While in CFX, Action, Text edit, Axis etc, is there a way to see the output of the timeline? I know while in CFX you can set the CFX output as a context but what if I have multiple CFX composites stacked up and I want to see the final output of the timeline while editing or modifying something inside a CFX or Action node?
I cant view my exporting job list . I want to cancel all my current export and make it fresh. My sequence is exporting again and again in same location with same file name. I need a support number in india.
When you are viewing the desktop, the view is available in the library and you can see which folder you are viewing. But when you have the player open the view icon disappears.
I am looking for a way to easily view the separate rgb channels as grey values for key pulling on each channel. Also, I am looking for a way to change the viewer gamma value without changing the fx value.
When I am in cfx in action 1-up, I press shift 3 or shift 4 to view side and top view. Nothing happens. What is the correct hotkey (smoke) to show the view. The hotkey suggested does not work. And if you manually select it, it takes quite a while to decide it will change view for you.
Is there any visual tool in smoke so i can view the alpha/matte and rgb at the same time (by overlaying alpha on top of the rgb) ? I can't find a way to do it. Did i miss something ? or does this tool exist ?
Why not have a swipe option for the Record viewer on the right side in Thumbnail View and allow locking the source thumbnails to sync with each other - Flame style (just no Reel view). If this could be saved with the current folder view it would largely cover a toolset comment I made before plus another great way to edit quickly.
who said that for editing there should only be one source window ? Why not multiples ? In fact, isn't that a large part of editing in the first place ? Allow multiple selections in the thumbnail view and link the sources together, select a point in the timeline and go to town for checking your editorial options.
This is really about gaining a functionality that’s around in AVID and used extensively by editors I’m trying to get on board with considering smoke as a real alternative. The Reel Locking mechanism in Flame is a great tool that could be expanded upon massively and brought into smoke via synched/locked multiple selection in the thumbnail view.
And another - The ability to see an edit as thumbnail view that can be re-arranged so you can group shots per your own liking but still allows drag and drop FX. This would allow another view on an edit that is incredibly powerful for many functions but color correction an obvious one. If you could save these 'views' you could have a fantastic basis for management.
I was wondering if there was an easy way to view individual color channels (Red, Green, Blue) in the viewer, and if so what the shortcuts are. I know you can do this simply in flame but can't seem to find a way to do it in Smoke.
When you're in source-sequence mode and push "f15" key (that is "player view mode" shortcut) several times, you can switch between different view modes. One in particular kept my attention: you can output a video frame with 3840x1080 resolution (double full hd), composed by primary output (on the left) and secondary output (on the right).
The strange thing is that these two video streams (primary and secondary) are not in sync: in fact secondary one is always delayed by one frame.
What is the purpose of this view mode? Is it possible to sync primary and secondary output in this particular mode? It would be great, because this way we could finally output stereoscopic 3D in side-by-side mode!
Why doesn't Selecting clips in the "Timing" view in CFX reveal which clip it is the Schematic? I realize there is a very small corresponding number, but a nice yellow surround would be nice.
Smoke classic shortcut is not working for Schematic vuew in CF, tried on three machines. Also why there is short cat for all "delete" "add" but not just plain move anymore. space M is not working. What's the logic?
At the moment I am in action building a composite. We I am viewing the entire comp via the default camera, I can see all the effects applied to the comp, but when I switch to perspective view. All the effects are gone.
Is there a way to see the effects why in perspective view?