I need to move projects and clips from an old system drive (restored from system crash, unbootable) to a new install on a new disk.
Is there a "best practice" for moving projects?
It looks like this
Disk1 (old)
/usr/discreet/clip/stonefs7/old projects
/usr/discreet/project/old projects
Disk2 (new)
/usr/discreet/clip/stonefs7/
/usr/discreet/project/
Is it possible, on a Finder level, to move project information (like sequences) between machines using Finder? After my current Smoke install has self-destructed without any fix from Autodesk, I need to retreive my work in progress.
I've tried copying the folder from /usr/discreet/project/ into the same location of another system with the same release version but it does not appear in either the launch screen or Media Hub.Can I replace the entire /discreet/ folder with the one from my crashed system to get the project back?
After archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)
the best way for backup projects on smoke on mac?
View 8 Replies View RelatedWhat I don't get is when it says "navigate to the project that contains the clips you want to copy." Does that refer to /usr/discreet/project/<project name>? Because when I navigate to there, I don't see any media to import.
View 3 Replies View RelatedI hit render early in the am to ship out a project for delivery. And in classic Johnny Fegan fashion my mac pro crashes, and won't boot. So my next step is to start the mac in Target Disk mode, via firewire(probably the second worst thing that has happened to me, firewire) and started to backup everything. Due to the fast turn around on the Project, I never had a chance to archive the project.
My current working config(on the mac pro that died) was an internal raid0, and a pci express ssd. The raid is where I keep my local Autodesk Media Storage folder, and the ssd is my system drive(/usr/discreet). I just completed a back up of both folders to my secondary mac pro, with a license of smoke installed, and am trying to open my project on it. I set the backup copy of my old Autodesk Media Storage folder up to be used under the Smoke setup utility, and when I access it in smoke the only option I get is to create a new project.
Is there a way to get this project back online?
I was wondering if it's possible to archive Smoke projects via command line as it would be so much convenient.
If so I could create a shell script with my project and library names and just leave it running overnight project after project. Is this possible? Or command line works only for un archiving?
I'm wanting to work on my laptop at home, and my machine at work. I have an external tunderbold SSD array that I want to use. How would I set smoke to save projects to the external drive? Whats the best work flow for this?
View 3 Replies View RelatedWhat's is the best way to share projects and media between two 2013 Smokes?
View 9 Replies View RelatedOur tech guys installed 2012 late last year, but suddenly all the 2011 projects are gone. But they still come up on WTC and the ManagedFolder's still fat. Any chance of recovery?
View 9 Replies View RelatedIs there a way to mange all of the renders and projects from one place or view?
Is there a good tutroal or write up on managing projects, renders, media, and libraries?
I have been learning smoke on various machines and different versions of the prereleases and service packs. I'm using SP2 now and II see older local projects listed in the media hub but they don't show up in the start-up screen listing of projects. how to regain access to these projects?
View 7 Replies View RelatedI lost my mac os hard drive, but my data or clips are in other place, i have a backup folder of discreet folder from /usr/discreet,
i make a new install of snow leopard and smoke 2012, how to relink this projects without restore/archive method, i not archive any file from library menu, I have the discreet folder and metadata in raid disk.
Is there any short cut for moving the clip from one track to other(above or below track)?
like we have in FCP.
Is there an equivalent command to the FCP alt up/down arrow to move a clip up and down between tracks? I can drag but it doesn't snap to the anything ie where the clip originally was on another track.
View 3 Replies View RelatedI'm looking at the possibilities of making grids moving across 3D objects like toruses (tori?) and ext bicubics to get kinda oldschool vector like effects. Slightly inspired by Hitchcock's Vertigo titles.
Using grids on diffuse map isn't looking great, with some artifacts where lines cross.
Changing the object to wireframe looks great, but I don't suppose there's some clever way to get the wireframe to animate across the surface is there? So the grid changes in some way?
I have managed to install Smoke (Pre release 1) with no problems. However, I have ended up with my framestore on my boot drive. How can I move it or create a new one?
View 7 Replies View RelatedI am doing a football program. It will be a standard 8.5x11 background page that will have small boxes of each senior, along with a box at the bottom of the photo that has their name and position. Sounds easy enough, I know. I came up with the idea to make a "Sr. Player Block" template with a block (just a rectangle shape) set at the bottom of the page which would allow me to pick the players image, arrange it to where it goes to the back so the block will show, adding their name and position on it, and then I was planning on flattening and saving each block and moving it to the background page. My problem is, is that when I open the actual photo, which looks great, nice and clear, to the block template, it gets pixalated and looks fuzzy! I have also noticed the same problem on some family program ads i have attempted, the photos I have opened (that get opened in a different little box look fine, but when i move them they look blurry...
View 2 Replies View RelatedI am new to the project navigator, I have several projects I would like to move to another computer and I am not sure how to do this. I have searched but must not have used the right words in the search. What is the correct way to move or export these project and import them into the other PC?
View 2 Replies View RelatedMoving C3D projects to a new server, specifically regarding data shortcuts?
For example, current projects live in: \serversharexxxproj_number
Soon, that path will be \A_new_server\shareBproj_numberdesign
Upon internal inspection, the data shortcuts are storing the full path and a relative path. Based on our initial tests, C3D is resolving the path to the source drawing using the relative path, even though the "full path" stored in the data shortcut is invalid.
I don't think we will need to use the "Data ShortCuts Editor" to fix the paths as long as the relative directory structure remains intact.
I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies View RelatedIs there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies View RelatedWhat is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies View RelatedI am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
Can Smoke support the OFX architecture?
View 1 Replies View RelatedDoes Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies View RelatedWhats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies View RelatedIs it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
I tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies View RelatedWhere do you set context in batch in the 2013 prerelease?
View 9 Replies View Related