AutoDesk Smoke :: Recovering Projects From Dead Mac?
Jan 14, 2014
I hit render early in the am to ship out a project for delivery. And in classic Johnny Fegan fashion my mac pro crashes, and won't boot. So my next step is to start the mac in Target Disk mode, via firewire(probably the second worst thing that has happened to me, firewire) and started to backup everything. Due to the fast turn around on the Project, I never had a chance to archive the project.
My current working config(on the mac pro that died) was an internal raid0, and a pci express ssd. The raid is where I keep my local Autodesk Media Storage folder, and the ssd is my system drive(/usr/discreet). I just completed a back up of both folders to my secondary mac pro, with a license of smoke installed, and am trying to open my project on it. I set the backup copy of my old Autodesk Media Storage folder up to be used under the Smoke setup utility, and when I access it in smoke the only option I get is to create a new project.
Is there a way to get this project back online?
View 7 Replies
ADVERTISEMENT
May 3, 2011
the best way for backup projects on smoke on mac?
View 8 Replies
View Related
Dec 11, 2012
I need to move projects and clips from an old system drive (restored from system crash, unbootable) to a new install on a new disk.
Is there a "best practice" for moving projects?
It looks like this
Disk1 (old)
/usr/discreet/clip/stonefs7/old projects
/usr/discreet/project/old projects
Disk2 (new)
/usr/discreet/clip/stonefs7/
/usr/discreet/project/
View 3 Replies
View Related
Oct 21, 2013
Is it possible, on a Finder level, to move project information (like sequences) between machines using Finder? After my current Smoke install has self-destructed without any fix from Autodesk, I need to retreive my work in progress.
I've tried copying the folder from /usr/discreet/project/ into the same location of another system with the same release version but it does not appear in either the launch screen or Media Hub.Can I replace the entire /discreet/ folder with the one from my crashed system to get the project back?
View 3 Replies
View Related
Aug 30, 2011
What I don't get is when it says "navigate to the project that contains the clips you want to copy." Does that refer to /usr/discreet/project/<project name>? Because when I navigate to there, I don't see any media to import.
View 3 Replies
View Related
Feb 11, 2014
I was wondering if it's possible to archive Smoke projects via command line as it would be so much convenient.
If so I could create a shell script with my project and library names and just leave it running overnight project after project. Is this possible? Or command line works only for un archiving?
View 3 Replies
View Related
Feb 8, 2014
I'm wanting to work on my laptop at home, and my machine at work. I have an external tunderbold SSD array that I want to use. How would I set smoke to save projects to the external drive? Whats the best work flow for this?
View 3 Replies
View Related
Jan 8, 2013
What's is the best way to share projects and media between two 2013 Smokes?
View 9 Replies
View Related
Apr 26, 2012
Our tech guys installed 2012 late last year, but suddenly all the 2011 projects are gone. But they still come up on WTC and the ManagedFolder's still fat. Any chance of recovery?
View 9 Replies
View Related
Mar 3, 2013
Is there a way to mange all of the renders and projects from one place or view?
Is there a good tutroal or write up on managing projects, renders, media, and libraries?
View 1 Replies
View Related
Jun 5, 2013
I have been learning smoke on various machines and different versions of the prereleases and service packs. I'm using SP2 now and II see older local projects listed in the media hub but they don't show up in the start-up screen listing of projects. how to regain access to these projects?
View 7 Replies
View Related
Jul 1, 2011
I lost my mac os hard drive, but my data or clips are in other place, i have a backup folder of discreet folder from /usr/discreet,
i make a new install of snow leopard and smoke 2012, how to relink this projects without restore/archive method, i not archive any file from library menu, I have the discreet folder and metadata in raid disk.
View 3 Replies
View Related
Sep 25, 2012
After archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)
View 4 Replies
View Related
Aug 29, 2013
I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies
View Related
Feb 26, 2013
Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies
View Related
Jan 16, 2014
What is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies
View Related
Oct 2, 2012
I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
View 7 Replies
View Related
Oct 18, 2012
Can Smoke support the OFX architecture?
View 1 Replies
View Related
Jul 10, 2012
Does Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies
View Related
Jan 10, 2014
Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies
View Related
Oct 27, 2013
Is it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
View 1 Replies
View Related
Aug 5, 2012
I tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
View 2 Replies
View Related
Nov 14, 2011
I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies
View Related
Jun 27, 2012
Where do you set context in batch in the 2013 prerelease?
View 9 Replies
View Related
Oct 29, 2012
When I export a XML from FCP 7 all of my files come over and link but there is no video with my HDV files (1440 x 1080) all of my other files (Canon FX etc) come over fine.
View 9 Replies
View Related
Jun 4, 2011
What is the best way to downconvert 5D HD to SD?
I converted the h.264 files to uncompressed 10bit. Bringing in the footage and XML was fine, but as soon as I resize to PAL (the timeline was changed to PAL, as was the output on the AJA) the picture starts anti aliasing in detail areas. I have processed this with every filter in Smoke with no satisfactory result.
View 5 Replies
View Related
Jul 7, 2013
I am having issues for a long time regarding importing XML into smoke 2013. Will try and explain you in breif.
First When we try an import XML into smoke it just doesnt do anything, in the message history box it comes up saying FOUND 0 SOURCES.
Nothing gets imported at all. No footage is imported, nothing is shown in timeline as well.
Second For a different project when the XML does get imported, the videos get imported but then again nothing is coming up in the timeline and in the message history box we get the following error.
XML Validation Failed.
Cannot process unliked media.
we have checked all the import options to make this work, including max up level and the rest but nothing is working.
View 6 Replies
View Related
Aug 16, 2013
I must have changed a setting because today my interactivity in CFX has taken a hit, specifically when making Axis moves. The move doesnt register until after I have made a change in the Axis field.
I know there is a setting for this but cannot remember. Am not having the same issue grabbing Axis in viewer.
View 2 Replies
View Related
Jun 7, 2012
I'm currently trying to conform an XML from FCP 7 into Smoke 2012 (Linux). The issue I have is that the files I want to conform with are MFX, however the files used in the FCP timeline are PRORES, therefore have a '.mov' extension. This means the Smoke is not seeing the MXF files due to the extension & the only way around it I have found, is to edit all of the '.mov' extensions to '.mxf' extensions in the actual XML. This works well, but is a complete nightmare, particularly as I'll have to do this for 13 half hour episodes!!!!
I have tried all the different combinations of Filename, Timecode, Tape, etc, but none work due to other metadata issues from the filming of the footage to it being delivered to our edit suites!!!!
Any way of making the Smoke ignore the file extension?
View 2 Replies
View Related
Nov 22, 2012
Can i remove the fx history ? for example i render a cfx clip. then i want to keep the render only and disconnect the relationship with its 'cfx history' . And is there any practical benefit of it ? You maybe will ask me : 'why do you wanna do it?' , my answer is " i don't know man, it just came across my mind .
View 3 Replies
View Related
Apr 27, 2011
Getting a depth of field result in Smoke 2012. A tutorial on this would be really beneficial for a new comer like me.
View 9 Replies
View Related