AutoDesk Smoke :: Deleting Fx History

Nov 22, 2012

Can i remove the fx history ? for example i render a cfx clip. then i want to keep the render only and disconnect the relationship with its 'cfx history' . And is there any practical benefit of it ? You maybe will ask me : 'why do you wanna do it?' , my answer is " i don't know man, it just came across my mind .

View 3 Replies


ADVERTISEMENT

AutoDesk Smoke :: Possible To Use History With Paint?

May 8, 2012

I have a clip where I have to remove a ring from a finger. I thought about using paint. But I might have to exchange that clip for a different color grade. Now, when I load paint again (from history) all the strokes I made are gone (I didn't work with autopaint). And I also can't exchange clips in history view. So what are my best options?

Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)

View 1 Replies View Related

AutoDesk Smoke :: Delete History From A Clip?

Sep 15, 2012

Is there a way to remove/delete the history from a rendered clip, other than re-rendering the clip without history enabled? Flame has a desktop function that can delete the history from an entire desktop (which would be convenient in my case here on Smoke 2012).

View 2 Replies View Related

AutoDesk Smoke :: Modify Clip History

Jun 5, 2012

I have R3D footage which I imported in 2K. For a couple shots I need a higher resolution, so I matched out my original clip from my timeline, saved it to my library, double clicked and selected Modify Clip History, where I set my layering to full. I don't change anything else, however, now my In and Out TC are not correct anymore! Everything is fine, just until I hit the Modify Clip History and Apply the changes.

View 5 Replies View Related

AutoDesk Smoke :: Swapping Sources In History

Oct 24, 2011

I am having problem with swapping Sources in History in the record timeline. In the History view I can double click on the processes in the tree, i.e. Action or refrain but if I double click the source to swap it out nothing happens. Nothing at all.

what could be causing this, really very annoying when I want to replace the current footage with a new render from 3d.

View 4 Replies View Related

AutoDesk Smoke :: How To Open Action From The Clip Using History

Jul 17, 2013

I unarchived a timeline from 2012, ext.2 into 2013, ext 1.  Is there any way to open action from the clip using History or do I have to rebuild everything?

View 4 Replies View Related

AutoDesk Smoke :: Hot Key For Deleting Keyframes

Feb 2, 2013

Is there a hot key for deleting keyframes? Its just a lot of clicks going to the animation tab to delete keyframes.

View 2 Replies View Related

AutoDesk Smoke :: Get Into 2012 Action Setup Via History In 2013?

Feb 8, 2013

Is there a way to get into a 2012 Action setup via history in 2013?

View 3 Replies View Related

AutoDesk Smoke :: Deleting Media From Another Project

Jul 4, 2013

This is similar to something I have asked for before regarding managing media in remote/networked machines. But I can't find a way to delete media (individual clips or folders) from a nother project within my machine without switching to/loading up that project. At present in 2012 and as far back as I can remember I have had the ability to move and manage media withing other projects on the host machine as well as remote/networked machine.
 
Is there a button/preference I'm missing as this is integral to the workflow I use.

View 2 Replies View Related

Photoshop :: Deleting History

Dec 16, 2004

Is there an easy way to delete several of the History lines all at once without getting rid of all the History.

I've been dragging each line to the trash bin but it's slow going if you have a lot to get rid of.

View 9 Replies View Related

Maya :: Crash When Deleting History?

Apr 16, 2013

I am having a problem with Maya 2013 (Mac) crashing when I delete history. I have had this happen a few times in the past but only if I go a long time without deleting the history. I do it on a more regular basis now but this past week it has been doing it every time. I created a button on my shelf as a short cut for this and when I was first having the problem I found that if I just do it from the edit drop down then it worked fine...at first. Now it is crashing even when I do it from there. One instance I saved before I deleted the history and it crashed when I deleted. Then I restarted my computer and the first time I deleted it worked but next time it crashed. I have both service packs, I'm not sure why it is doing this all of a sudden.

View 1 Replies View Related

Photoshop :: Deleting History From An EXIF File? (CS4)

Feb 28, 2009

i'm using PSCS4 and i'm trying to delete the "history" portion that was originally saved in my XMP data. i've gone to the "file info"->"advanced" window pane (tab) and deleted the "history" folder (like you suggested in your article a photoshop history lesson"), but the folder continues to reappear with all the initial history data. it appears like i delete the history folder, but then when opening up the "file info" window again, all the history is there like it was before i attempted to delete it.

View 1 Replies View Related

AutoDesk Smoke :: Smoke And AJA Dual Stream Stereoscopic Output

Aug 29, 2013

I know that the AJA Kona 3 card has 2 outputs.  Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card?  Dual Stream output is what I am really getting at.

View 4 Replies View Related

AutoDesk Smoke :: Smoke And Sub-blacks / Super-whites

Feb 26, 2013

Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.

View 9 Replies View Related

AutoDesk Smoke :: Best Plugin To Do Spline Warps In Smoke

Jan 16, 2014

What is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac. 

View 7 Replies View Related

AutoDesk Smoke :: Importing And Using Alpha Channels In Autodesk

Oct 2, 2012

I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.

1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?

2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?

View 7 Replies View Related

AutoDesk Smoke :: Can Smoke Support OFX Architecture

Oct 18, 2012

Can Smoke support the OFX architecture?

View 1 Replies View Related

AutoDesk Smoke :: Selections In Smoke As In Combustion?

Jul 10, 2012

Does Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?

View 3 Replies View Related

AutoDesk Smoke :: Importing TWs To Smoke

Jan 10, 2014

Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?

View 1 Replies View Related

Photoshop :: Couldn't Use History Brush Because History State Doesn't Have A Corresponding Layer

Aug 20, 2013

I am trying to learn layers and layer masks.  I loaded an image, than control J to duplicate it.  I then added a layer mask.  Everything good so far.  I then went to filters chose a blur.  Then went to brushes with black as my foreground color, I just wanted to brush away the blur, and got an error message. "could not use the history brush because the history state does not have a corresponding layer."

View 3 Replies View Related

Photoshop :: Could Not Use History Brush - History State Lacks Corresponding Channel - CS6?

Mar 24, 2013

Everytime I try to use my history brush, that error pops up and I have no clue why. If I try to just open a blank document and use the brush it does not give me this error and I can "use" the brush but you cant see anything on the project.

so when this error happens im trying to do a project and say I place a file(picture) into the project and this is the very first thing I do. I place it, then I size the image down some. I then make a new layer to use the brush for behind the picture and then this is when I get the error. I have no clue what is wrong

View 1 Replies View Related

Lightroom :: Delete Part Of History In History Panel?

Oct 8, 2008

I can only see how to delete the entire history in the history panel. Is there a way I can remove only selected states? I am using LR 1.4.

View 6 Replies View Related

AutoDesk Smoke :: Run Flame Over VPN

Oct 27, 2013

Is it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?

Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM

View 1 Replies View Related

AutoDesk Smoke :: Takes All The Available RAM

Aug 5, 2012

I tried Smoke 2013 PR2 on my MacBook Air 11".

It uses all the available RAM that is 4GB.

Same experience with Smoke 2012 on my MacBook pro 13"".

Is that normal?

View 2 Replies View Related

AutoDesk Smoke :: EXR Look Different On Import

Nov 14, 2011

I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.

View 6 Replies View Related

AutoDesk Smoke :: Where To Set Context

Jun 27, 2012

Where do you set context in batch in the 2013 prerelease?

View 9 Replies View Related

AutoDesk Smoke :: Exporting XML From FCP

Oct 29, 2012

When I export a XML from FCP 7 all of my files come over and link but there is no video with my HDV files (1440 x 1080) all of my other files (Canon FX etc) come over fine.

View 9 Replies View Related

AutoDesk Smoke :: HD To SD Down-conversion?

Jun 4, 2011

What is the best way to downconvert 5D HD to SD?

I converted the h.264 files to uncompressed 10bit. Bringing in the footage and XML was fine, but as soon as I resize to PAL (the timeline was changed to PAL, as was the output on the AJA) the picture starts anti aliasing in detail areas. I have processed this with every filter in Smoke with no satisfactory result.

View 5 Replies View Related

AutoDesk Smoke :: How To Import XML

Jul 7, 2013

I am having issues for a long time regarding importing XML into smoke 2013. Will try and explain you in breif.
 
First When we try an import XML into smoke it just doesnt do anything, in the message history box it comes up saying FOUND 0 SOURCES.
 
Nothing gets imported at all. No footage is imported, nothing is shown in timeline as well.
 
Second For a different project when the XML does get imported, the videos get imported but then again nothing is coming up in the timeline and in the message history box we get the following error.
 
XML Validation Failed.

Cannot process unliked media.
 
we have checked all the import options to make this work, including max up level and the rest but nothing is working.

View 6 Replies View Related

AutoDesk Smoke :: Better Interactivity In CFX?

Aug 16, 2013

I must have changed a setting because today my interactivity in CFX has taken a hit, specifically when making Axis moves. The move doesnt register until after I have made a change in the Axis field.
 
I know there is a setting for this but cannot remember. Am not having the same issue grabbing Axis in viewer.

View 2 Replies View Related

AutoDesk Smoke :: How To Conform XML From FCP 7

Jun 7, 2012

I'm currently trying to conform an XML from FCP 7 into Smoke 2012 (Linux). The issue I have is that the files I want to conform with are MFX, however the files used in the FCP timeline are PRORES, therefore have a '.mov' extension. This means the Smoke is not seeing the MXF files due to the extension & the only way around it I have found, is to edit all of the '.mov' extensions to '.mxf' extensions in the actual XML. This works well, but is a complete nightmare, particularly as I'll have to do this for 13 half hour episodes!!!!

I have tried all the different combinations of Filename, Timecode, Tape, etc, but none work due to other metadata issues from the filming of the footage to it being delivered to our edit suites!!!!

Any way of making the Smoke ignore the file extension?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved