AutoDesk Smoke :: Possible To Use History With Paint?
May 8, 2012
I have a clip where I have to remove a ring from a finger. I thought about using paint. But I might have to exchange that clip for a different color grade. Now, when I load paint again (from history) all the strokes I made are gone (I didn't work with autopaint). And I also can't exchange clips in history view. So what are my best options?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
View 1 Replies
ADVERTISEMENT
Nov 22, 2012
Can i remove the fx history ? for example i render a cfx clip. then i want to keep the render only and disconnect the relationship with its 'cfx history' . And is there any practical benefit of it ? You maybe will ask me : 'why do you wanna do it?' , my answer is " i don't know man, it just came across my mind .
View 3 Replies
View Related
Sep 15, 2012
Is there a way to remove/delete the history from a rendered clip, other than re-rendering the clip without history enabled? Flame has a desktop function that can delete the history from an entire desktop (which would be convenient in my case here on Smoke 2012).
View 2 Replies
View Related
Jun 5, 2012
I have R3D footage which I imported in 2K. For a couple shots I need a higher resolution, so I matched out my original clip from my timeline, saved it to my library, double clicked and selected Modify Clip History, where I set my layering to full. I don't change anything else, however, now my In and Out TC are not correct anymore! Everything is fine, just until I hit the Modify Clip History and Apply the changes.
View 5 Replies
View Related
Oct 24, 2011
I am having problem with swapping Sources in History in the record timeline. In the History view I can double click on the processes in the tree, i.e. Action or refrain but if I double click the source to swap it out nothing happens. Nothing at all.
what could be causing this, really very annoying when I want to replace the current footage with a new render from 3d.
View 4 Replies
View Related
Jul 17, 2013
I unarchived a timeline from 2012, ext.2 into 2013, ext 1. Is there any way to open action from the clip using History or do I have to rebuild everything?
View 4 Replies
View Related
Feb 8, 2013
Is there a way to get into a 2012 Action setup via history in 2013?
View 3 Replies
View Related
Jan 17, 2013
I am trying to paint out a logo on a bottle with the clone paint tool, then have what I have painted over track/scale as the bottle zooms in during the shot. I think I am supposed to be using the Gmask to get the geometry of the track done (as I can do this with a matte if I want that to cover the logo with a blur or gradient or something else), but I am uncertain how to link the Gmask track node to the paint node in the correct way.
View 9 Replies
View Related
Jun 21, 2012
My main usage of Desktop paint is partially sharpening important parts of the picture that the focus puller unfortunately missed. I would love to see sharpening added to the tools in CFX Paint. Blur is there already, should not be the hardest thing to implement.
View 5 Replies
View Related
Mar 5, 2013
I'm in paint module (desktop tool) then i want to use autopaint combined with tracking. The problem i only can get single tracker inside the stabilize module. Am i really limited to use only 1 tracker ?
View 6 Replies
View Related
Mar 5, 2013
in paint module, when i do the 'wipe' , i only can wipe the single/current frame. I can't find the setting to wipe the whole clip. am i allowed to wipe the whole clip using a single click ?
View 1 Replies
View Related
Jul 5, 2012
In terms of feature sets, it seems like a few more things are needed to make this a full-fledged compositor... (so one doesn't have to leverage AE/Nuke/etc.).
In particular:
- 3d projector
- 3d tracker
- scene to point cloud (or even automated 2d to 3d conversion??)
- particle system
These things seem to be standard elsewhere... For us, it seems sort of crucial to add that. We think that not having to round trip is a really great edge of Smoke, and the integration between CFX and the time-line is very well done! However, then there's so many things missing compared to other packages. And those are the type of features that can really create more complex scenes and really speed up the work.
Also check out the new context-aware patch/move/paste tools in Photoshop. That would be a great addition to the paint module. CS6 has a timeline now and offers a lot more in terms of paint. Esp. if one can apply context moves to the entire motion sequence with auto-paint (that's something where PS CS6 still lags).
View 1 Replies
View Related
Aug 5, 2011
What would be the equivalent on Smoke to S in Paint on Flame to scale the brush?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
View 1 Replies
View Related
Dec 10, 2012
I have a paint node with several sources for revealing. I´d like to see these sources for example to set the slip within paint. The documentation says F1 F1 but that doesn´t work. Is this a bug or are there alternative ways of seeing that source?
View 2 Replies
View Related
Apr 4, 2013
On the new smoke for mac however, I am getting luma shifts after doing a lot of reveal/cloning backgrounds etc.
This does not happen all the time, and not consistently, I find if I paint for a while and go back and forth, the image becomes much darker, not always the entire clip, sometimes just the frame I'm painting.
View 5 Replies
View Related
Aug 10, 2012
I was wanting to try out the clone tool to paint out a fly in some footage I have, but I can't get the clone tool to grab a sample region. I hold down ctrl and click where I want to sample from, but the green circle doesn't appear. I can do it by manually offsetting it with the x and Y position, but I'd like to do it with my pen.
View 3 Replies
View Related
Mar 6, 2013
I'm doing painting (clone brush). The problem after I finish I realize that i only paint single frame (current frame). I want to extend the duration of the stroke , how to do this? do i have to redo all the paint using autopaint? is this the best way I can do?
View 3 Replies
View Related
Apr 3, 2013
I have a number of clips that were soft imported, then used in the paint module to remove some blemishes. I have since done a 'store local copy' on the original clips.
The painted clip still has the 'soft' indicator. How do I update the painted clip?
Is there a way to go into the history of the painted clip and replace the soft import with the local copy? Do I 'store local copy' on the painted clip?
View 3 Replies
View Related
Jul 23, 2012
When I am in Paint and sketching with the brush I get blocky artefacts.
If I hit esc it gets better, but does not fix the problem.
View 5 Replies
View Related
Sep 20, 2011
When I use Paint module with Graphics menu, I get bad edges randomly on the image in action. The default setting of Anti-aliasing in paint module is 4 now, and I have tried to change the value from 4 to 1, 1 to 4. the only differences are the amount of, position of bad edges.
I also tried to check the "Divide" function in the media-list, but it gets from specific colour to white. I only want to take the bad edges away from the image.
View 1 Replies
View Related
Jul 27, 2012
I am trying to use the clone brush in paint through the tools menu.
View 1 Replies
View Related
Nov 25, 2011
I Want Create a Reveal Transition in the timeline with black & white paint splatter matte! i can this in ACTION MODULE but i want in timeline!
View 2 Replies
View Related
Aug 29, 2013
I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies
View Related
Feb 26, 2013
Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies
View Related
Jan 16, 2014
What is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies
View Related
Oct 2, 2012
I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
View 7 Replies
View Related
Oct 18, 2012
Can Smoke support the OFX architecture?
View 1 Replies
View Related
Jul 10, 2012
Does Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies
View Related
Jan 10, 2014
Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies
View Related
Dec 1, 2012
I have placed the History pallet on the right side to join Layers and Materials several times. I have saved Workplaces to include that History pallet.It does not stick.Reopen Psp and no history pallet.
Replace History and it will hide and stay there for that session.Is there a trick for getting the History palette to stay?
View 3 Replies
View Related
Nov 12, 2011
simply put, can I save my history into a script, or just create the script from start?
View 4 Replies
View Related
