I have CS3 and use a 3800 for my work. Whenever I set an image to print the preview displaces the image to the left and up about 1 cm. no other application I have does this.
I am using windows XP on a dual core PC.
I'm using PSCS5.1 and when I open Bridge I get the message "Bridge encountered a problem and is unable to read the cache. Please try purging the Central Cache Preferences to correct the situation." where "Central Cache Preferences" are located? I found in Bridge under Tools the "Cache" but It does not say anything about Central Cache Preferences.
View 5 Replies View RelatedBasically I am trying to warp a pattern about it's centre point, in a radial manor (the pattern file is obviously square in photoshop). If you imagine the pattern on a planar surface, the warp that I am trying to achieve is as if one were to grab the central point of the surface and pull it directly away from the face - see image below for visual aid...
Â
I'm trying to achieve a pattern that is a flat file, but looks like you are looking directly at the end of a pointy end of a cone that used to be a flat surface with the pattern on it.
I'm on CS5. I have a photo, and I want to highlight the central portion of this using a custom shape - let's say a star. When I do this I can work with the shape.
Â
I don't want to work with the shape, I want it to be there, but the image inside the shape I want to remain visible. Then round the edges of the shape I want to add borders (?Stroke) of colors selected from the image. Obviously I don't want to hand draw the shape because I won't make it symmetrical.
Â
So, once I've chosen my shape, how can I work outside the shape, whilst still retaining visibility inside the shape?
In short all I want to do is take people out of images that I have and paste them all together in new images and add a background colour. Is there a function to cut them out, do I have to sellect them piece by piece.
View 4 Replies View RelatedEvery so often Revit asks me if I would like to Synchronize with central. What does this mean and is it important to do?
View 3 Replies View RelatedI am having an issue syncing to a central file over a vpn connection. I am able to vpn into a consultant's network and I am able to access the folder structure of the network by typing in an IP address into file explorer. I have mapped the network connection and I am able to consistently access the files. At the consultants office the files are located on NAS device and they access the device using the following nomenclature. \devicenamefolder. I access the same device with the following nomenclature. \ipaddressfolder. When I open the central file, the central file thinks that it has moved and is informing me to save the file as a new central file or a local file.
Â
I am not a network guy but does this have something to do with the central file being saved with a unc path vs an ip address?? Is there a work around for this? Does the vpn need to be configured differently or does the consultant just need to save the central file by using the ip name?Â
My Architecture office is using Mac Pro's with OSX and Parallels to run Windows 7 and Revit 2011. Â We are having issues with getting everyone to be able to work synchronize to the Central File. Â If one workstation (workstation 1) intially creates the Central File, puts it on the server then creates a local from the Central File they have no issue when synchronizing to Central. Â However if another workstation (workstation 2) creates their own Local File it does not synchronize to central, it tries and an error of "File Failed to Save" pops up everytime. Â
Â
The Central File location is the same on both workstations (ex. Â \psfFirmProjectsActive ProjectsProject# and nameConstruction DocumentsDrawingsCentral File Name}.
Â
We have also turned off all antivirus and firewalls to elimnate that as an access issue.
Â
how we may be able to get everyone working with Local Files, and Synchronizing to Central?
I'm testing out a Revit Server configuration with a local server on one site connected to a central sever at another site. So far the testing has gone fine but we've run into a snag. The public IP address at the site of the central server has changed because of a change in ISPs. Now I'm unable to figure out how to update the IP addres settings for the central server that the local server connects to..
Â
I've tried running the install again but it won't run since the software is already installed. I've tried running a repair. I've tried logging into Revit Server Administrator but there is no option to change the IP address of the central server it connects to.
It would be really good to be able to use WTC from an iPad (I am lazy). The bad news is it uses flash so it wont work. Is there an HTML 5 version in the future?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
We are trying to implement Revit server in our organisation. We have installed Revit server on windows 2013 server. We are able to connect to our local server and sync and relinquish the revit model. We had setup another server in our branch office. Now, how to sync the revit model in the local server to the server in branch office. We are able to see both the servers in revit server admin and also copy paste files through browser.
View 2 Replies View RelatedIs it possible to host a central file in Autodesk and use it for worksharing?
View 2 Replies View RelatedWe have to do a project in Revit The residential complex consists of 6 free standing buildings of a maximum height of 10 stories. Approximately 700 apartments.(50 different groups)The Office building is a 16 story high structure with a stepped silhouette GFA of the entire complex is 100 000 sq.m. We use Revit Architecture and Structure 2012. The project team is 12 people
How best to divide a file?
What will be the best allocation of project work?
What to avoid?
Some materials that describe how to work on such a project?
In Linux the export location is /var/www/html/WiretapCental/export. The same path doesn't exist in OSX, not that I can find. The browser just shows me /localhost/Wiretapcentral/export
View 3 Replies View Relatedif I have two lines which run roughly paralel, but sometimes vary in the distance between them, is there a quick method of having CAD draw a line which is central to the two?
Basically, like an offset, but it would need to offset the line at a distance that is central to the two lines, as and where it varies. IE, you couldnt choose 'offset' and then choose 'mid between two points' because the distance between the lines varies at points..
This is my very first attempt at a script:Â
Â
* this script will prompt the user for a file name and location and then save the current file as a .pdf with secure save options*/
var curDoc = app.activeDocument;
var destName = prompt ("Enter a Filename Daniel", "", "Save With Security");
var destFolder = Folder.selectDialog('Select which folder to save to :');
saveFileToPDF(destFolder+ '/' + destName); // not sure if i need this here ?
[Code] .......
Â
i can do the math of (artboard width)-(text width) / 2 is start point of text but how do i find out the text width and the artboard width?
I want to find a way to make a central locaton for thousands of images that I can tag to make them easy to find. For strictly this purpose and not editing, what is the difference between doing this in Lightroom vs. Bridge? It seems like they do the sam thing? I was also considering iPhoto for this purpose, how these programs differ for this purpose?
View 5 Replies View RelatedI've been trying to export via the Wiretap Central, but when I try to open the IFFFS folder I get an error message: Unable to access the volume stonefs1: the given volume does not have a corresponding hardware partition.
View 5 Replies View RelatedI received this message:" Central model is corrupt and must be manually recovered" and do not know how to proceed.
View 1 Replies View RelatedHow to use Dropbox as a central file server for two or more users on-line?
View 8 Replies View RelatedHow come Revit (and in my case 2014) requires a full UNC path (such as \serverproject�01.rvt or \192.145.1.123project�01.rvt) instead of a Mapped Drive path (such as Z:project�01.rvt), which would ultimately cause issues to the location and access of the central file between users? Is it simply the way Revit is programmed to locate and access central files?
View 2 Replies View RelatedI am creating a part that consists of a series of intermediate Lofts. The various Loft termination profiles are sketched on a series of stacked planes, most of which are parallel to one another. I have a Work Axis (oriented at an angle off of true vertical) that penetrates all of these sketch planes, essentially forming a "central axis" for my part. Most, but not all, of my sketch planes are normal (perpendicular) to that axis.
I want to use my "central axis" as a reference point in each of my sketches, i.e., the point where the axis intersects the sketch plane.  I am having a minor difficulty.
When I project my central axis into a sketch whose plane is normal (perpendicular) to the axis,  Inventor displays a reference point where the axis penetrates the plane and I can dimension my sketch geometry relative to that point. Conversely, no such point is displayed when I project the axis into a sketch plane that is NOT normal to the axis.
Is this correct behavior?   To have a dimension able point on my "non-normal" sketch planes, must I create explicit Work Points to mark the intersection between my Axis and such planes, and then project those points into the related sketches?
I have a cylindrical tube that I need to animate moving 180 degrees around a central axis remote from the cylinder. I also want to create a circular motion locally for the cylindrical tube as it follows the 180 degree arc.I planned on creating the 180 degree rotation first and then the local circular motion second.
Â
When I created the first motion I tried to use an object (another cylinder) as the transform centre for the rotation. As soon as I click on "Auto-key" the "Use transform centre" option is greyed out. I therefore moved the cylindrical tubes own pivot to the required position for centre of rotation. After I created the 180 degree rotation I moved the pivot back so that I could create the local rotation. At this point I find that the original motion has now changed to suit the new pivot point.
Â
how I can get the "Use transform centre" option to work in this instance?
I have recently upgraded from PS7 to CS2 and have not been able to get a decent print since. I used colour mangement with PS7 and had no problems (unfortunately I had a virus and PS7 got trashed as part of the removal of the virus). Whenever I print now I get prints that look to be oversaturated with nasty colour casts. The settings I am using are as follows:-
Print with preview
Colour Management
Print Document (Profile Adobe RGB (1998))
Color handling Let Photoshop determine colors
Printer profile Prem Semigloss 2880.icc
Rendering intent Relative Colorimetric
Black Point Compensation Checked
I then click on Print and select
Epson Stylus Photo 2100
I then click on Properties and select Premium Semigloss Photo Paper from the Media Type.
I then click on Custom and select PremSemi2880 from the dropdown (this has the Color Management set to No Color Adjustment and Photo Quality set to Super Photo 2880dpi. All other settings are unchecked)
I then click on OK and then OK again
When the Print Preview window appears it is horrible (which is what I would expect. It was like that in PS7). When I click on Print, the image looks though it is super saturated just as if the printer driver settings have been applied along with the Photoshop settings.
I am getting lines in my prints from PhotoShop CS6.
Â
My printer is the Canon MX522.
Â
Ive noticed that printing from other *dumb* programs such as Microsoft Paint the images look fine BUT with photoshop the images print ultra fast and have lines. It looks like note taking paper. How do I fix this? I am guessing this is some kind of Printer quality setting????Â
I'm using phoroshop cs6, windows 7 and an Epson 3880. When I go to print, the print preview looks good, the paper size is correct but only the lower 1/2 -2/3 of the photo prints.
View 1 Replies View RelatedI am using CS5 on a Mac printing to an Epson artisan50 but prints turn out too dark. The image on the monitor is correct in all applications including CS5. The prints are correct in other applications but only in CS5 are they too dark.Â
View 3 Replies View RelatedI'm printing on a epson 200p, and using photoshop 7. When I print on the watercolor paper, my prints have been coming out really dull, and it looks like there's a haze over them.
View 9 Replies View RelatedIn CS3, I'm having trouble getting my prints to match the appearance on monitor -- my prints are uniformly 1-2 stops too dark, color otherwise is very good. I have calibrated my Dell monitor with Colorvision's Spyder2 colorimeter. Prints are also a hair too dark in CS2, but not as dark.
Photos and Photoshop are in RGB color space. Printer is Epson R2400 with updated drivers I just downloaded and updated into Photoshop. I also downloaded updated ICC color profiles for the Epson Premium Glossy Paper I use.
Printer settings in Photoshop are: Photoshop manages color; Adobe RGB printer profile; perceptual rendering intent; black point compensation "on"; ICM color management; color management set to "Off". I'm using North American Prepress 2 color setting. These are the exact settings Scott Kelby recommends in his "Adobe Photoshop CS3 Book for Digital Photographers" for getting calibrated prints.
Old: CS3 printing to Epson 3800. New: CS4 prints dark on Epson 3800. Regardless of picture sent over. Same settings as with CS3 and every variation I can think of. Epson 3800 hasn't changed. Only Adobe Photoshop version has. I can print the same pics from (example) Windows picture manager, and what I see on the CALIBRATED screen I see on the Epson, so this isn't an Epson issue.
View 1 Replies View Relatedi want to automate the following task to make a 20inch by 20 inch print with 9 smaller prints each 5.33inch prints evenly spaced with a 3/4 inch border between the print and a 1 1/2 border around the outside for framing.
View 1 Replies View Related