Xara :: Picture Editor Not Saving JPEGs?

Mar 3, 2011

I use XPE regularly to edit photos and save them in JPEG format to My Picture folders. However, since yesterday the files that get saved after editing, are no longer JPEGs but some unsupported file which cannot be opened. (See screen shot of properties.) I have tried everything I can think of to fix this, but the results are always the same.

If I edit the photographs with Picasa, there is no problem with the edited output to a folder.

If I save the XPE edited files to the Desktop instead of a folder, they are also alright. I am using Windows 7 Home.

View 3 Replies


ADVERTISEMENT

Photoshop Elements :: 6 - Editor Doesn't Offer Saving Of Changed Picture Files In Stack

Mar 15, 2014

With PSE_6 under Windows 8.1, the Editor doesn't offer saving of changed picture files in stack, though it creates stacks in Organzer automatically. Any solution?

View 2 Replies View Related

Photoshop :: Saving As Jpegs

Jan 10, 2006

Whenever I open a jpeg from my dig camera and I work on it on PS CS2, at saving time, it always goes right to Save AS. I just simply want to overwrite the previous picture without going into the quality dialog box. I want to keep the original size, but just want to save the changes.

How can I disable that in CS2 (if possible)?

View 3 Replies View Related

Xara :: Images Exporting As 300 Dpi JPEGs

May 16, 2012

I have to get to my printer ASAP with these images and i am having issues with a memory exception error, i have tried different computers to no avail, i have attached the .xar file and i need both images exporting as 300dpi jpegs. the images in the file are at 100% size but i can also live with 50% 300dpi jpeg exports.

the black background is C35 M35 Y35 K100 (rich black) and i have converted all fonts to shapes won't need the fonts. Both images use the 'speedometer' graphic as a clip view

View 9 Replies View Related

Photoshop :: CS5 Extended - Saving JPEGs

Jul 19, 2013

I'm trying to save 8bit tiff files (2400x1374pixel 300dpi) with no layers, paths etc as a jpeg in CS5 but even with the jpeg quality slider set to 0 it is still giving me a file size over 400kb.
 
The tiff files were coverted to 72dpi @ 900pixel wide.  I can't figure out why it is still giving me a jpeg over 400kb in filesize. It should be well under 100kb. I normally like to set the jpeg slider around 8 to
 
still have a sharp image but even at 0 it's still giving me a large file.
 
Mac OS 10.6.8, 12GB ram, iMac 2.93Ghz quad-core i7     CS5 ext.  v12.0.4  x64

View 2 Replies View Related

Photoshop :: Saving JPEGS From Batch

Sep 4, 2006

I have been saving bulk images from Bridge using Batch process. What I would like to do is when the image is automatically saved as a JPEG. I want them to be saved as a (6) medium. However, they all seem to be saved as a (12) large. I then open each one and re-save.

Is there a automated process?

View 2 Replies View Related

Lightroom :: Saving Pictures As JPEGs?

Feb 13, 2012

I accidently forgot to open a new catalogue before editing my RAW files. Lightroom 3.6 allowed me to edit all my pictures but now I can't export any of them to save as JPEGs. Is there any way for me to export these pictures or do I have to start over from square one?

View 5 Replies View Related

Xara :: Import JPEGs Exported From Luminance

Apr 18, 2013

I've occasionally created some tone-mapped pictures from multiple exposure brackets using the Luminance HDR program. But when I import the jpegs exported from Luminance to Xara, their Red and Blue channels appear to get swapped.

I can fix it by using a Live Effect. But why does this happen? Is there a way to losslessly avoid this before importing to Xara? Because Live Effects impose their own resolution limitations on the image.

View 9 Replies View Related

Photoshop :: Batch Saving Layers As Individual JPEGs?

Jan 4, 2012

I have assembled a wholel lot of scanned pages from my sketch pad into one psd file.  That file has guides which I use to register and align every page (each page is therefore its own layer).  Is there a way I can make an action and save off each individual layer as its own jpeg?  I set up an action but I don't know how to get photoshop to save it with a distinct namespace.  The first action I set up basically prompted me to re-name each layer as I saved it, which isn't really saving time.  What I want is for the action to start at the bottom layer and turn off the visiblity of all the layers above it, save the visible layer as a jpeg with a name based on  the layer and then turn on the next layer's visibitlity and repeat, until all layers have been saved.

View 4 Replies View Related

Photoshop :: Colour Changes When Saving Images As JPEGS / PNGS In CS6?

Sep 15, 2012

When I save my .PSD files as .JPEGS the colour of the images change drastically.

View 1 Replies View Related

Photoshop Elements :: Why Has 12 Suddenly Stopped Saving JPEGs

Mar 3, 2014

I recently had to have a new hard drive and motherboard installed on my PC, which is running Win 7. I didn't have any problems at all with Elements prior to this.
 
I haven't opened PSE 12 for a few days.
 
My normal workflow is:
 
Open RAW file, edit, then separately save PSD and JPG in Irfanview (maybe an odd choice but it's familiar and easy to use).
 
Just recently I've noticed a problem in Irfanview when entering and saving IPTC data, in that suddenly I'm told the file isn't found, when I try to open it the image area is black, and all I can do is delete it. This is possibly unrelated to my PSE 12 problem, however each time the only way to get a usable copy of the JPG is to re-open the PSD in Elements and re-save as a JPG.
 
Today, in Elements, when I go to Save As (my usual choice) I go through the usual process but when I check on my hard drive the JPG hasn't been saved.

View 2 Replies View Related

Xara :: Photographic Designer 9 Colour Editor?

Nov 6, 2013

We have been connected together using a program so I can see what he is doing and vice versa.I have noticed he has more colours across the bottom. Is there any way to check as I can't seem to edit or increased the colours.

View 5 Replies View Related

AutoCAD Map 3D :: Style Editor Changes Not Saving

Apr 22, 2013

I created a map by using mapwspace and the FDO connections to shp files. Lately, when I have made changes in the style editor such as adding a thematic rule with a feature label, these changes are not "sticking" after the drawing has been saved.

I have deleted the associated idx files but it has not worked.

The drawing is saved at the end of the day but when I open it up the next day, the Style Editor changes are not there. I have been using MAP3D 2013 for over a year but this specific issue has occured only in the past couple of weeks.

View 3 Replies View Related

Xara :: Cross Hatch Pattern On Colour Editor

Jul 24, 2013

ive noticed that in designer pro x9 the colour editor gets a cross hatch pattern when manipulating 3d or bitmap objets is this correct? if so, what is the purpose?

View 6 Replies View Related

Xara :: Reload / Replace Images After Editing In Outside Editor

Jan 24, 2011

Running Xara Designer Pro 6.6.6.63205 on win7 64 bit

How to handle this scenario:

I have several photoshop images loaded into xara and trying to make a sensible 4 way arrangement of 4 images. Imagine that one image is outsized compared to the others and needs to be cropped.

I open the original image in photoshop and make the edit, now what is the most expeditious way to refresh/replace/reload... etc the newer state into xara.

I don't see any replace/reload sort of menu item anywhere and have just been deleting the the bad image and reimporting the newer one.

View 9 Replies View Related

Photoshop Elements :: 12 Editor Not Saving Changes To File?

Feb 27, 2014

I have downloaded PE 12 & for some reason its Editor is not saving any changes I made despite ticking all relevant save boxes.  It behaves very strangely - it does save 1 photo & then it stops saving . I was thinking it might be an interference with a previous PE11 versio - so I have deleted it from my PC - but it did not work. As a result it is useless for me - as I can process photos in my editor but as it does not save any changes

View 1 Replies View Related

AutoCad :: Drawing Disappeared After Saving It In Block Editor?

Apr 18, 2011

I was working on my drawing, using blocks: open block editor, edit block, close editor by clicking cross of closing block editor, then autocad asks me if I want to save changes, I click yes. And one time I clicked the smaller cross, which closes the whole drawing, and intuitionally clicked to save it. So my whole drawing closed. And when I open it, Autocad asks me : "filename.dwg contains authoring elements. Open it in Block Etidor?" yes/no/cancel. If I press Yes, then my drawing opens in block edit mode, and when I click close block editor the whole drawing closes. If I press no, then my drawing opens in normal mode, and I have in it just lines of that block. All layers, titleblocks are there, but my drawing disappeared. Is there any chance to get it back? how? I can't attach this drawing, because it's to large, ~4,7 mb.

View 9 Replies View Related

Illustrator :: Saving Live Artwork In Pattern Editor

Aug 10, 2012

I finally had the opportunity to use CS6 to create a pattern. Some of the artwork contained blended symbols. When I went to save the pattern, it tells me the symbols and blends will be expanded. In CS5 I can build the artwork, using any tools I choose and drag it into the swatch panel. The source artwork remains fully intact with blends and symbols. Better yet, I can save the source artwork as a symbol and update the pattern directly from the symbol editor window. And even MORE bizarre is the fact you cannot edit a symbol while in "Pattern Edit Mode", even though the "Edit Symbol" button is clearly visible and active within Pattern Mode.
 
The CS6 Pattern editor is cool, but if it won't retain symbols and blends I find it a big disappointment.

View 2 Replies View Related

Photoshop Elements :: Move Picture From Editor To Organizer?

Sep 14, 2012

When I open a picture on my computer with PSE9 it appears in the Editor.  After I make changes in the picture I would like to be able to add it to the Organizer without having to open the Organier,Find the file on my computer and then see it in the Organizer. 

View 3 Replies View Related

Lightroom :: How To Move A Picture Into Develop (or External Editor)

Feb 8, 2014

I have had to reinstall my operating system - windows 7 - and have reinstalled LR 5.3. I can see all the thumbnails and keywords etc in library but when I try to move a picture into develop (or external editor) I get the message "The folder could not be found". The My pictures files on the left hand side are present but not in bold white. How to connect to these later files.

View 2 Replies View Related

Xara :: Couldn't Find Panel Fill Option In Color Editor

Jul 8, 2012

I am a newbie to Xara and I have Xara web designer 7 premium.I watched the video tutorial which is very useful, but when I tried to use some of the video lessons I could not find a "Panel Fill" option in the color editor, how I can access it ??

View 2 Replies View Related

Photoshop Elements :: Can Prevent Editor From Auto-saving To Catalog

Oct 2, 2013

Can I prevent PSE editor from autosaving to catalog?

View 2 Replies View Related

Photoshop Elements :: When Try To Use Editor For Picture In IPhoto Only Get Gray Screen

Mar 11, 2014

When I try to use edtor for a picture in iPhoto I get nothing but a gray screen.  No picture will load.  I select the picture in iPhote, select external editor and click on editor,  Just a gray screen.

View 4 Replies View Related

Photoshop Elements :: Picture Saved In Editor Does Not Show Up In Organizer

Jan 4, 2014

I recently upgraded from PSE5 to PSE12. The installation went smoothly and my old Catalog was imported without a hitch. After my first test run to edit a file, I did a "Save As" in a version set with the original. I then closed the file, but when I went to the organizer, it was not there. When I go to the folder in Windows Explorer, the edited file is present - I just can't get it to appear (alone or in a version set) in the Organizer. (FYI, I am running Windows 8).

View 3 Replies View Related

Lightroom :: How To Configure Double Click To Open Picture In Default Editor

Sep 20, 2013

I wanted to ask, if it is possible to open an image in my default editor, if I do a double click on the image?In my case, I want to open the image in Photoshop CC for further manipulation.

View 3 Replies View Related

Photoshop Elements :: Saving Files In Editor / Could Not Build A Preview Because Of A Program Error

Nov 2, 2013

Whilst trying to save an edited file in editor I get the following message.

Could not build a preview because of a program error. Im using imac

View 4 Replies View Related

Xara :: Saving A Brush In Designer Pro X

Jan 22, 2013

When I make a brush how can I save it for other projects. I have tried saving it with a template but it is gone next time I open the template.

View 5 Replies View Related

Xara :: Auto Saving Of JPGs

Oct 10, 2013

I produce a colour brochure of approx 30 pages containing photos & details of our latest special offers every 2 weeks in Xara Designer Pro X9 (which is by far the best software that I have used for this type of work).

As each page is completed, I save the document as a XAR file then export it as a JPG in 2 sizes, a large one for printing & a smaller one that will become a pdf file for emailing to our customers.

I am looking to make the process more efficient and was wondering if there was any way to automate the saving of the 3 files in varying formats and filenames?

I have been looking at Graphics Converter Pro 2013 which converts XAR files to JPG but for some reason the resulting file is of very low quality.

View 3 Replies View Related

Xara :: Saving A Bullet Setting?

Feb 21, 2011

I'm using the bullet list setting. I turned on the bullets for a line of text. I didn't like the default, so I re-set the margin settings on the ruler. Fine, I've got level one to my liking.

Created a second paragraph by splitting the first. This creates a second level one bullet. I then indent again to the second level, and reset the margin settings to my liking. Good for level two.

For the third line I want to go back to level one. So I press enter to create a new paragraph, and then press shift-tab to set the level up one to level one, and the margin settings are all back at the default for level one. They were not remembered by Xara.

So I re-set that paragraph the way I want level one. For level two I create another new paragraph from that paragraph, and the level two is back to the default settings for level two.

Is there any way to create a style that can be recalled, or new default setting for bullets to meet my liking?

View 2 Replies View Related

Xara :: How To Paste Porch Into Picture 2

Mar 23, 2012

I have two jpegs of homes - one with a porch and one without. I have used the shape tool to select the porch in the one picture (It turns black as it should and copied it). The question is how to I paste it onto the other picture so that it shows up as a porch and not a 'black' selection?

View 5 Replies View Related

Xara :: How To Take A Picture With White Background

Mar 23, 2012

How to use this powerful program, I have two questions in the meantime -

1 - How to take a pic with a white background, and make it transparent.

2 - How to take that pic with the transparent background, and enable a shadow around the pic itself, not the entire square frame.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved